Q&A of Siddheshwar Chopra Spooky2 Frequency Therapy and Which Kit to Choose
Q: Exceptionally well-presented, thanks for this simplified approach, could we have trainer Sid’s contact?
Answer: sidhusai@gmail.com
Q: How to create a program?
Answer: Please follow the steps to create your own program and add it to your custom database.
Step 1 Choose File-Create Program
Step 2 Name your program.
Step 3 Enter your frequencies.
Step 4 Dwell.
Step 5 Program Descriptions.
For more details, please check the link: https://www.spooky2.com/how-to-create-a-program/?_ga=2.234309982.192406919.1625940346-209311849.1625940346.
Q: How to convert Molecular Weight to Frequency and run it in Spooky2 Software？
Answer: This instruction will show you how to convert the known molecular weight to frequency and run it in Spooky2 software.
Firstly, find the Molecular Weight of the substance.
You can find the Molecular Weight on this website: https://www.ncbi.nlm.nih.gov/pccompound/.
Here is a blog for you too: https://www.spooky2-mall.com/blog/how-to-convert-molecular-weight-to-frequency-and-run-it-in-spooky2-software/.
Q: The 30 custom programs are full on my GenX. How do I delete one of the programs without deleting the whole preset?
Answer: Double-click in the top panel to add. Double-click in the bottom panel (“Loaded Programs”) to delete.
For more details, please check the link: https://www.facebook.com/groups/spooky2/permalink/1684653408363222/
Q: Could you post the instructions on how to do the foot tub detox?
Answer: The Spooky2 foot bath is more a Contact session using water to spread the current entry point to make it less “feeling”. Some “junk” can get out into the water, and much is stimulated to be removed through normal detox channels and one of the hardest to detox items, toxins from mold exposures, is moved out much easier using the settings of the footbath.
This post explains how to perform a footbath:
https://www.spooky2-mall.com/blog/how-to-do-foot-bath-using-spooky2-hand-cylinders/
https://www.facebook.com/groups/spooky2/permalink/1660276284134268/
Q: How many people can you treat at once with a GX Essential Kit?
Answer: 1. If you give all the same treatment, then you can treat as many people as nails fit into the remote. Means 10+.
For people needing different treatments, means different frequencies, you need one generator per preset (set of frequencies you run at the same time) (XM is one generator, GX has 2 generators). You can have the nails of one person also in many remotes at the same time.
I mainly do it that way that I run those frequencies I need, but my parents and some friends who gave me nails get the same treatment.
For more details, please check the link: https://www.facebook.com/groups/spooky2/permalink/1445678452260720/
Q: How to place the tens pad when doing a biofeedback scan?
Answer: The following will help you determine the ideal TENS pad locations for GeneratorX biofeedback sessions. This blog is very detailed:
https://www.spooky2-mall.com/blog/how-to-place-tens-pads-while-doing-biofeedback-using-generatorx/
Q: To heal plants, and air and get rid of mold, do you need the scalar or plasma? Or can it be done through genx pro?
Answer: Sure, we will consider holding a webinar that talks about environmental healing. Here are some suggestions from other customers. 1. Some use remote to treat plants for their diseases and to kill fungus, mold and the rest. I am not sure, but I think environmental presets are used for that. If you know the pathogen you can then use a leaf in the remote and then treat the plant that way.
2. Some have had great response putting plants in the scalar field.
3. If you have a radionics machine and use on remote I recommend using biodynamic field sprays and compost preparations to treat your soil and garden. Best ever! Just apply these and after 3 years your garden is healed.
4. I use the cold laser to imprint the water with Planet-Jupiter (ALT) and Schumann resonance (CAFL). It seems to work.
For more details, please check the link: https://www.facebook.com/groups/spooky2/permalink/1370382219790344/.
Q: How precisely must the two scalar units be aligned to create a scalar field?
Answer: There are only two major considerations:
1)Don’t have the coils inside the field, so aiming the lids towards each other makes this simple.
2)Have the correct tuning frequency in use.
That’s all there is to it. You can have the boxes sideways, upside down, even without a link cable (albeit short distance) and still establish a scalar field.
https://spooky2scalar.zendesk.com/hc/en-us/articles/9774151932827-How-precisely-must-the-two-scalar-units-be-aligned-to-create-a-scalar-field-
For more details, please check the link: https://spooky2scalar.zendesk.com/hc/en-us/articles/9743378448283-How-far-apart-are-your-scalar-units-What-length-link-cable-are-you-using-What-kind-of-results-are-you-seeing-
Q: What’s the difference between the Scalar and Central?
Answer: Here is the difference between the Scalar and Central: Spooky2 Scalar is a Tesla device that transmits natural scalar energy rather than electromagnetic waves. A scalar field is created between the two boxes (Transmitter and Receiver) to restore your health. Spooky2 Plasma delivers frequencies to your body via powerful electromagnetic waves. That’s why it is best used for killing. It’s the only machine we know of that can transmit frequencies of up to 3,500,000Hz (3.5MHz) without needing any wasteful and potentially harmful fixed carrier frequency.
If you want to boost your immune system so your body is better able to fight or rebuild itself, we would recommend you to choose Spooky2 Scalar. For people who like to use essential oil and herbs, Spooky2 Scalar is also a good choice since you could get the healing energy from those substances.
If you are dealing with pathogen-related health problems requiring a lot of powerful killing, we recommend you choose Spooky2 Plasma. It can also help you get rid of the annoying molds in your house.
For more details, please go to this link to help make a decision: https://www.spooky2-mall.com/blog/how-to-choose-between-spooky2-plasma-and-spooky2-scalar/
Q: What’s the difference between Generator X Pro and XM Generator?
Answer: Some of our customers who are familiar with us may know that before GeneratorX Pro, we had another generator called XM Generator. XM Generator and GeneratorX Pro are both very effective and powerful. They can run Spooky2 presets for Plasma, Contact, Remote, PEMF Coil, and Cold Laser modes and are compatible with all the programs in the Spooky2 frequency database.
XM Generator is an economical choice for most beginners, while GeneratorX Pro is developed to have more features. Here are some of them:
- Each Generator X Pro contains 2 function generators, each with 2 outputs and a full biofeedback function.
- GX Pro can run at 40 MHz with any waveform and can load up to 30 programs from Spooky2 software to run in its unique standalone mode, in other words, without connecting to a computer.
- GeneratorX Pro has improved frequency resolution all the way up to 40 MHz, compared to the 25 MHz of the XM Generator.
- Offline frequency resolution increased from 2 decimal places to 8 decimal places, delivering more precise frequencies.
- Improved built-in amplitude modulation.
- Upgradable firmware.
Here is a blog that explains the main advantage of GenX Pro:
https://www.spooky2-mall.com/blog/why-should-you-choose-spooky2-generatorx-pro/.
I hope this can help you understand GX Pro better!
Q: Question 1: With Scalar Spooky 2 machine-can you have 2 people sleeping in a bed-sharing same scalar field? Or is this only for 1 person at a time?
Question 2: I have an adjustable bed that is electronic and the base is metal. Am I able to use spooky scalar with it?
Answer: It is recommended that only one person at a time should use Spooky2 Scalar. Your energy has already been quantum entangled with family members and friends, so you can share the scalar field with them. We do not recommend sharing the scalar field with strangers, or people with serious diseases. You can learn more on those 2 blogs:
1. https://www.spooky2scalar.com/can-we-share-scalar-fields-with-other-people/;
2. https://www.spooky2scalar.com/more-people-in-scalar-field-less-scalar-energy/.
The metal bed would have a slight effect, but the scalar field can travel through metal and not be greatly affected. However, the link cable should be kept away from the metal, as regular EMF flows through this cable.
For more details, please check the link: https://spooky2scalar.zendesk.com/hc/en-us/articles/9747502319131-If-you-use-scalar-and-you-were-lying-in-a-metal-bed-would-this-affect-the-scalar-field-Making-it-less-strong-
Q: How does one know what is better to select? How does one know how often to run these programs and how does one know when to stop?
Answer: 1. In general, the best way to proceed is to try each program by itself for 3-4 days non-stop in Remote Mode, or once daily in Contact or Plasma Modes for three days. If you see no improvement, move on to the next one. Stop when you’re happy that the condition is resolved.
2. My approach would be to load all those programs into a bio-scan. Scan them to the top 20, then run another scan to bring them down to the top 10. Run it the way David says above and re-scan every 3-4 days. I use this on all situations I want to correct, it zeros in on the frequencies I want to eliminate.
3. Since we live in a toxic world today, I personally run a detox preset non-stop on one generator permanently and treat myself to a Spooky Central while I’m sleeping. In general, though, you should always detox contemporaneously when you’re killing pathogens or parasites. However, cataracts are not pathogenic in origin, so detoxing is not necessary. But it’s always a good idea anyway unless you have more pressing needs for that generator. X-rays are associated with cataracts as well as microwave radiation. Cigarette smoking is also a known cause. Ensure that you get adequate vitamin C since low levels can cause this problem, too.
4. Personally, I would use a dwell of 1 rather than .33. We believe that doing this is more effective unless you run short programs for the same amount of time that a dwell of 1 would take. For non-pathogenic conditions like cataracts, it’s not necessary to run non-stop. I would continue until the soreness appeared, take a break of a few hours until it goes, then restart. You’ll know when your husband’s eyes start to hurt again when he’s had enough for the day. Contact Mode for the head is best done with TENS pads applied to the top of each shoulder at the base of the neck. However, I would use Remote Mode as the mainstay of the treatment.
For more information please check this link:
http://www.spooky2.com/forums/viewtopic.php?f=5&t=7559
https://www.spooky2support.com/hc/en-us/articles/360010283013-How-long-to-do-frequencies-How-long-should-I-run-a-program-without-feeling-results-before-I-give-up-on-it-To-stop-the-program-when-you-stop-having-a-reaction-to-it-good-or-bad-
