Q1: Can you chain together peptide presets with Rife programs?

A: You have to chain then together. So if you are using programs from the PROGRAMS tab, you would load a shell preset, add the programs and then save that custom preset. Then you could load the custom preset, add it to a chain at the bottom of the preset list, the find your desired Peptide preset and add it to the chain. Then you must save the chain and then you can load it to a generator and run it.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/posts/3405701636258382

Q2: Is the PEMF coil always used without the Boost?

A: Out 1 by itself is limited to 20v peak to peak.Boosted port using 20v and inverse+sync provides up to 40v peak to peak.When you double the voltage, you square the power.

Other than this, there is no difference in output frequency wise.Given that the PEFM coil was original driven by the SC at a fixed frequency of 100 Hz and at +29VDC which equates to 58v peak to peak, you will want to try and keep it boosted.

If you don’t have a boost, while at 20v peak to peak, it may still offer some therapeutic effects.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/654866288008611/
https://www.spooky2support.com/hc/en-us/articles/228903727-What-s-the-difference-between-connect-PEMF-coil-to-Out1-directly-and-connecting-PEMF-Coil-via-a-booster

Q3: How do you connect the PEMF coil?

A: Spooky Coil can be used with both Spooky Central and a Spooky XM generator. You can click the link for the differences: https://www.spooky2-mall.com/blog/using-the-pemf-coil-with-spooky-central-and-spooky2-xm-generator/

Q4: How do you do the biofeedback on pets?

A: For doing a BFB scan on pets, many of our users prefer GX Pro Sample Digitizer Scan and Scalar Digitizer Scan. For GX Pro Sample Digitizer Scan, you only need to collect your pet’s biological samples (e.g. saliva, blood, urine, nail powder, etc.) without connecting your pet to the machine, which is very convenient. For Scalar Digitizer Scan, just let your pet stay in the scalar field.

For how to run biofeedback scans, please read this blog:
https://www.spooky2-mall.com/blog/four-ways-of-running-spooky2-biofeedback-scans/

Let’s see what our users say:
So I’ve done a bfb scan for dogs using their saliva/urine/blood. It’s been pretty good for them so far!

I crate my dogs in a metal crate and run a scalar scan.So.. I had a day when I was doing a Scalar BFB.. and my cat came a laid with me.. and I thot.. this will be interesting.

The feedback came back with a lot of cat related things… I then built a program for my cat and run it through scalar.

Q5: Is there a need to worry about the plastic lids or lead in the glass containers?

A: “I’ve observed no such issue nor have I seen any signs of such an issue in anyone that I’ve monitored. I also have not read of such an accounting either. I have all kinds of material on my input plate and have been in the field for nearly 3 years along with 4 others. We are effectively in the field more than not.

Personally, I have been in the field 24/7 for almost a year with very few breaks given the state of the world. I only got out of the house twice last month, and at most it accounts for only a couple of hours away from the scalar field. Perhaps it is because you are not putting them into your body physically where they can physically cause reactions in the body.

The way I describe how the information of a frequency can have the body respond by performing something it already does — this may even describe why.”

For more details, please check the link:
https://spooky2scalar.zendesk.com/hc/en-us/articles/9774639344155-Is-there-a-need-to-worry-about-the-plastic-lids-or-lead-in-the-glass-containers

Q6: Do you have to use only pet programs for the pets?

A: 1. Any preset or program can be ran on pets which is ran on humans. My pets do better @ 5v than 20v. 10v for killing is ok for short while.

2. I’ve noticed that if I select a preset that has an amplitude of 20V… my dog shows agitation. She weighs around 70 lbs. In the settings I lower it to 5V or 10V. If I select 5V I can run the programs 24 hours. If I select 10V I watch her and generally do 12 hours. On one of her biofeedback reverse look ups… Softtalk Essential Oils popped up. It’s for calming. I have run that for her when I know she needs calming and it works.

For more information, please check this link: 
https://www.facebook.com/groups/spooky2/posts/2538754506286437/

Q7: Any restrictions for placement of PEMF? Can we place it near the jaw?

A: PEMF creates a pulsed electromagnetic field. The strength that the generator can produce is safe to use on the head.

Q8: How long to imprint water?

A: Only a few minutes. Perhaps 3 or more.

Q9: Is the Terrain protocol necessary before treatment for pets?

A: When it comes to pets, it’s not strictly necessary to complete the full Terrain Protocol first. However, it’s generally recommended, since it helps detoxify and prepare the body, improving the effectiveness of later treatments.

For sensitive pets (and people!), we offer low-power versions of the Terrain Protocol that are much gentler and safer. If you’d rather skip Terrain, you can still work directly based on their symptoms—just make sure to: Start with shorter, low-power sessions (like Remote or reduced Contact). Monitor them closely for any reactions.

We also have a helpful guide here that walks you through the process: 
https://www.spooky2-mall.com/blog/how-to-treat-pets-with-spooky2/

Source: https://www.facebook.com/groups/spooky2/posts/3170982803063601/

Q10: What Kind of detox is it suitable for an old dog (16 years old)?

A: Spooky2 Rife Therapy for PETS – FIRST POST TO READ for Pets

Please note – Pet rife therapy is the same as for humans with one exception – amplitude. Several inc myself have noticed that 20v amplitude makes our pets more agitated. 5-10v is just as effective, beneficial. If running Terrain – choose the 2.5v or 5v program. There is NO NEED to go lower than 2.5v. Lower than 1.0v may not be enough to power the remote for an effective detox. The lower terrains are intended for one to start low then move up to higher volt amplitude before starting other kill programs.

Though Spooky2 recommends starting with Terrain which includes detoxing metals and chemicals, if the pet is not well and needs a more gentle start, I personally recommend starting with Schumann Resonator preset from the healing folder for 3-5 days then run Detox Maintenance Preset as it focuses on detoxing organs only to assist in preparing the organs for the more major detox of Terrain. Pets who’ve eaten kibble and been given vaccines have a lot of extra chemicals and metals in their body. A more gentle start may be desired.

Please see this group’s GUIDES section. The 14th GUIDE is dedicated to Pet Rife Therapy. https://www.facebook.com/groups/spooky2/learning_content/?filter=754978632685971

Source: https://www.facebook.com/groups/spooky2/posts/2754390841389468/

Q11: May I use PEMF anywhere on my dogs body, even near the heart?

A: Yes. PEMF is magnetic energy, so as long as there isn’t something that will react to the magnetic pull, it’ll be fine.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/posts/2135868566575035/

Q12: How to get nail DNA from animals for Spooky2 Remote treatment?

A: The following videos will show you exactly how to do this on a cat, dog, horse and bird.

How to trim your cat’s claw:
https://youtu.be/g-4hwXDxg0c

How to clip dog’s nail:
https://youtu.be/ZTbML0WNsGk

How to Trim a Horse Hoof:
https://youtu.be/lZRx8T96YR0

How to Clip a Bird’s Nails:
https://youtu.be/7IphkCpqfj8

For more details, please check the link:
http://www.spooky2-mall.com/blog/how-to-get-nail-dna-from-animals/

Q13: What’s the best way to deliver frequencies to a pet (cat or dog) apart from Remote?

A: You can use stickers. I transfer the frequencies onto holographic paper, then stick it on cardboard and place it around my cat’s bed. It’s been successful. I fought off dental problems and a UTI, plus given general arthritis frequencies which seem to help. Worth a try.

I’m using both remote and Plasma on my cat. I intend to do more contact-type stuff with the coil and cold laser that night when he’s resting on our bed. That will be the easiest time for me to do it while he’s lying still for the night. I’m not sure yet if it’s helping, but I hope so. He has some kidney dysfunction and developed arthritis after he was given a forced rabies vaccine.

He was also recently given the convenia injection which I did not know they were going to give that to him after they cleaned his teeth so I’m trying my best to detox him with activated charcoal, milk thistle, bark and whiskers detox supplement, MMS, etc while simultaneously running detox on remote and toggling on and off using the plasma at night on him as to not overwhelm his body by doing it every night.

Remote mostly or plasma for more serious issues. I’ve also used a cold laser, though rarely running at 19 Hz for a few minutes.

Funny how when plasma is running, the dogs want to be close to the light. They know it’s helping them.

For more details, please click here: 
https://www.facebook.com/groups/spooky2/posts/3183180458510502

Related Blog: https://www.spooky2-mall.com/blog/how-to-treat-pets-with-spooky2/