Q1: Will it help lower blood pressure?

A: Yes, by exposing the body to specific colours, it aims to: Restore balance to the body’s energy centres; Stimulate healing and tissue regeneration; Reduce stress and anxiety; Improve mood and overall well-being.

Q2: Can you put a jar of water on a print out of the color wheel and embed all the energy of colors into the water at the same time, or are you better to only have 1 color in each water jar?

A: You can do both ways; there is no prohibition to print all the energy of colors together at the same time.

Q3: Could you also imprint a crystal and use the crystal in a pitcher of water to then infuse/imprint the frequencies into the water? That way we can keep reusing the crystal? Thoughts?

A: The best material for frequency imprinting is quartz crystal. It is possibly the best thing, but clean high-quality sand, water, oils, other gemstones, silver, copper, and gold are also good. Lots of people like hologram stickers too. It depends on what you are doing and how you want/need to use it.

For more details, please check the link:
https://www.spooky2.com/forums/viewtopic.phpf=28&t=14868&sid=86ce08e13355b281c4daad3d8670402d

Q4: Hard to put tens pads on a ducks femur. How to do the scan?

A: For doing a BFB scan on a duck or other animals, many of our users prefer GX Pro Sample Digitizer Scan and Scalar Digitizer Scan. For GX Pro Sample Digitizer Scan, you only need to collect your pet’s biological samples (e.g. saliva, blood, urine, nail powder, etc.) without connecting your pet to the machine, which is very convenient. For Scalar Digitizer Scan, just let your pet stay in the scalar field.

For how to run biofeedback scans, please read this blog:
https://www.spooky2-mall.com/blog/four-ways-of-running-spooky2-biofeedback-scans/

Let’s see what our users say:

So I’ve done a bfb scan for dogs using their saliva/urine/blood. It’s been pretty good for them so far!

I crate my dogs in a metal crate and run a scalar scan.

So.. I had a day when I was doing a Scalar BFB.. and my cat came a laid with me.. and I thot.. this will be interesting. The feedback came back with alot of cat related things… I then built a program for my cat and run it thru scalar.

Q5: Can you use the holographic stickers to imprint？

A: Yes, you can imprint any frequency you want on the holographic sticker. There is no limit to the types of frequencies that can be imprinted. That is also including molecular weight frequencies and base pair frequencies that are in Spooky2 frequency database. Researches have gone into Giga HZ range of frequencies that is way beyond what Spooky2 does. So there’s no restriction on the frequencies that’s supplied to the water.

Q6: Does the water need to be distilled?

A: If you want to do frequency imprinting with scalar, to perform this, you will need a source of water like bottled water. No need the distilled water. Turn on Spooky2 Scalar. Place the cup on the output coil located on the transmitter box. Then tune your Spooky2 Scalar accordingly. Leave the cup on the coil while you are doing Scalar treatment, such as pure scalar, molecular scalar and rife scalar.

Q7: Can I load the light theraphy frequency on GenX Pro to run it in stand alone?

A: Yes, you can. GeneratorX can be run in standalone mode, which means you can run desired programs without connecting to a computer. Follow these steps from the link to load programs into GeneratorX:
https://www.spooky2-mall.com/blog/how-to-load-programs-into-generatorx/

Q8: How should we treat nail fungus?

A: Below are the detailed response provided by our users, please feel free to have a look at:

1. Have you tried colloidal silver? It clears fungal infections very well.

I would assume that most CS users in this forum make their own.
http://www.colloidsforlife.com/silver_Fungus.html

2. 465 Hz appears often and doesn’t seem to be helping here.

Three sets you could try are:
Fungus Black Nail (CUST) and Onychomycosis (KHZ).
I have had some results with Epidermophyton Floccosum where it seemed to control the fungus perimeter. (Seemed to work better than laser treatment, filing, etc. of podiatrist)

The simplest thing to do is to load all three of these into a preset (H-bomb or Inverse sawtooth waveform) and then tick remove duplicate frequencies.
There are several Hz here which aren’t in sets you have tried so fingers crossed these will do something.

My personal preference here would be 9.5v max amplitude and 100% offset, using Out1 only, not boost. I think you have tens pad setup correct.

This will take some time and so suggest to take regular photos so as to track if there is any progress.

I would give it 2-3 weeks chance to make a difference even if you had the right frequencies as this is a tough one to beat.

Keep in touch with how it goes here and what works and what doesn’t – together we can help make this system more effective.

3. Consider Oil of Oregano, GSE Grapefruit seed extract, Sunlight, Ozonated Olive oil, Borax soap soak and/or Baking soda, as a Dr claims cancer is a fungus and he washes the tumors with either baking soda or borax…I forgot. Both would go after fungus.

4. I wonder if the difficulty with treating any kind of nail bug using contact mode might be because nails don’t conduct because their water content is low. To this end, I would suggest spraying them with water so the current can flow over the surface of the nails. I don’t mean soak them just get a mist of water on their surface that will make their surface as conductive as flesh.

5. I don’t have rife suggestions but I know olive leaf extract often works. Recently, a friend and great practitioner turned me onto a very strong high-quality freeze-dried garlic. He tells me it works well on nail fungus. It must be taken internally, but I believe topically as well.
http://www.amazon.com/Pharmax-Garlic-Freeze-Dried-Vegetarian/dp/B000NEB994/ref=sr_1_1_s_it?s=hpc&ie=UTF8&qid=1463246547&sr=1-1&keywords=pharmax+garlic

6. Found a very homemade solution for battling the nail fungus. (using a hairdryer + cardboard)
http://www.mmsinfo.org/testimonials/toenail_fungus_infection.pdf

7. Contact or remote frequencies may not do anything as the fungi are in dead tissue where there may not be any conductivity. The other thing is that these frequencies may not be appropriate for microsporum, epidermophyton or trichophyton which cause nail fungus, ringworm, etc.

8. You are never going to be able to get the current to pass through the toes, so it is going to be difficult to place them closer than the top of the foot… I don’t know how sensitive that area is, so don’t know what all precautions you would have it take to have it be effective.

I have been using the remote for mold/fungus and my fingernails appear to be clearing up and my toenails have been painful, like I stirred up the proverbial hornet’s nest, so something good should come out of it.

Also, please understand, that when the finger and toenails are messed up with fungus or other, it takes several months for the nails to grow out again – AFTER the nail generator heals.

So the process is: kill the pathogen, let the nail bed heal, wait for the nail to grow out, if after 3 months, you aren’t happy, then start something else. An alternative is to keep running different programs targeting possible problems – but then you don’t know what helped if that matters to you.

9. I have run fungus programs from Morgellons protocol and also clipping of infected nail remotely and had success overtime with both.

10. This is a matter of finding the correct frequency to kill the fungus, and running it long enough to do the task.

I have a number of “bad” nails, but not sure whether it is fungus or something else. I am finally using the Morgellons and Lyme Protocol and have progressed up to the Biofilm Presets. There is much activity happening within, although, not sure how much is happening at the nails. The nail junk may be related, or not.

11. Trichophyton rubrum, which helped me in one week with plasma.

12. I’ve tried Remote, Plasma and used Silver and had success run ML fungus programs.

13. You can use remote (Plasma is stronger) and for me, the Onychomycosis worked best. But I highly recommend “pure” Tea Tree oil for the affected nail & area over a long period of time. The smell Of Tea Tree is very strong, so I use a mixture with lavender oil and eucalyptus that you mix to your own liking. Suggest 4oz of Tea Tree cause it will take “time and persistence” the others are more for making them smell acceptable, for starters mix 12 droppers of Tea Tree with 4-6 of lavender 2-4 of eucalyptus. Then place in an empty dropper bottle or some other container (could use ear swabs to apply if no dropper) When I tried Rife only it took it out but mine had dug in deep and kept recurring. I am now in the final stages of getting it out completely and this is what it took, persistent treatment with tea tree mixture and occasional touch up with Rife. FYI Tea Tree kills fungus dead almost immediately the problem is the smell and how deep the fungus has progressed (don’t forget about socks, shoes and carpet/floors…anything that can harbor. I use borax with my laundry)

For more details, please check the link:
http://www.spooky2.com/forums/viewtopic.php?f=23&t=5191
https://www.facebook.com/groups/spooky2/permalink/661412404020666/
https://www.facebook.com/groups/spooky2/permalink/742404272588145
https://www.facebook.com/groups/spooky2/permalink/1339258706236029/

Q9: Noticing there r a few programs for a similar condition ie…eyes farsightedness…is there a way to link the chains all together rather than running individually?

A: Yes. A preset chain contains a series of presets so you can run killing presets and healing presets in one generator. This blog will show you how to create a preset chain. Please visit via:
https://www.spooky2-mall.com/blog/how-to-create-a-preset-chain/

Q10: Can you use scalar to imprint water?

A: Yes, you can. The water frequency will then be tailor-made for you, since it will also contain the natural frequencies of your body, and the effect the scalar wave had on it. Remember to put the water in the transmitter box while you are receiving the scalar wave treatment.