Q1: How frequently should terrain protocol be repeated?

A: Let’s see what our users said about it:

“I’ve run the Terrain protocol continuously for over 3 months, with no detriment. If you are in good health, it shouldn’t hurt to run it for a year, but I don’ think it is necessary. I think its probably better to run it periodically (say once a month) rather than continuously, as your body can become accustomed to it.”

Q2: Can Terrain be used with Cats?

A: Yes. When it comes to pets, it’s not strictly necessary to complete the full Terrain Protocol first. However, it’s generally recommended, since it helps detoxify and prepare the body, improving the effectiveness of later treatments.For sensitive pets (and people!), we offer low-power versions of the Terrain Protocol that are much gentler and safer. If you’d rather skip Terrain, you can still work directly based on their symptoms—just make sure to: Start with shorter, low-power sessions (like Remote or reduced Contact). Monitor them closely for any reactions.

We also have a helpful guide here that walks you through the process: https://www.spooky2-mall.com/blog/how-to-treat-pets-with-spooky2/

Source: https://www.facebook.com/groups/spooky2/posts/3170982803063601/

Q3: The red lights on my remote device are not blinking. Is it still working?

A: First, check the Errors tab. If there are no errors, then things could be OK. Not all presets light up the LEDs. To check everything, run the Preset in the Presets tab called >Miscellaneous, “Generator Signal Tests (R) – JW”. This will light up the LEDs.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1685783704916859/

Q4: How do we know which delivery method is better for the issue you want to treat?

A: Use Contact when you want to have the electricity running through the body.Use Plasma when you need to kill something very aggressively.

Use Remote when you need to be away from the devices, but still want the benefits of running frequencies – and maybe more than one different program running at once to assist with different maladies.

Use Cold Laser when the issue is rather surface, or when you want to focus healing on the nose or ears – since contact should not be used above the shoulders, etc.Again, often there isn’t one mode only that may be used for any specific area or malady. We often use many remotes and one other mode at the same time. Just find what works for you. Some people use nothing but remote and have great effectiveness for general maladies, although I wouldn’t recommend this for very serious or aggressive issues.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1335526546609245/

Q5: Does Terrain kills the biofilm protecting parasites?

A: 1. There is a parasite killing preset which you can run. If you have GX, run a scan across your tummy and then run the hit frequencies. If you have Plasma, that is the best option to run the programs. If not, both remote and contact are OK.2. It depends on which parasites and what helped brought them about. A combination between Rifing and zapping can help. I also using the Candida albicans sets (if they produce a response in the body) as candida can help to create the environment whereby parasites like to live and lay eggs. As well as maintaining your detox maintenance sets and the occasional more specific detox for instance detox liver and the like, and also Herx helpers, try a combination of contact and plasma attacks and see how the body reacts. Remember to take breaks if your Herx is too severe. Add non-Spooky2 treatments and plenty of fiber and keep yourself regular.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1389525804542652/

Q6: I’ve preloaded some programs and now I want to delete them to create space for others. How do I delete preloaded programs?

A: 1. You can go to the software, then choose database – Edit Custom database #1. Then you will see all your own programs and you can edit or delete them.May be an image of text that says ‘Spooky2 C) John White 20220707 ile Database Global Help Test Mode Utils Select Custom Database #2 Select Custom Database #3 Select Custom Database rograms Select Biofeedback Database Edit Custom Database Edit Custom Database #2 Edit Custom Database #3 Edit Custom Database Edit Biofeedback Database Refresh Database Write Database Text’

2. Go into the file explorer on your computer, then the spooky2 folder, then have a look at Data folder and Scandata folders. Also preset collections, then user folder. You can see files with the dates on and can delete them from there. Be careful not to delete anything that Spooky2 has put in. I have found that to delete completely and to get the files to disappear, I have to shut down Spooky2 and restart it. I’m no expert, so just giving my personal experience, so be very careful not to mess with other files.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/posts/2289112904583933/

Q7: Are software Presets several Software Programs put together?I didn’t understand the difference between these.

A: 1. Presets are organized setups. When you choose one, it automatically loads all the necessary settings in the software. When running factory presets such as Morgellons, you do not need to choose any programs as they are already selected in the presets. “Shell Presets” on the other hand, enable you to load any number of various setups one after the other and choose the frequency programs that suit you.

2. Programs are collections of individual frequencies that are related to a specific condition. Frequency sets make up programs, and multiple programs become sequences.

For more information, please read this blog:
https://www.spooky2-mall.com/blog/understanding-presets-and-programs-improve-your-exploration-of-spooky2/

For how to select presets and programs, please read this blog: https://www.spooky2-mall.com/blog/how-to-select-and-run-presets-and-programs/

Q8: How many programs can you loan onto GXPro?

A: You need to load programs into GX Pro from software and it will store 30 programs most per time. Each program is limited to 200 frequencies. Inside one program, each frequency will be using the same waveform, amplitude, offset and duration (dwell).

For how to load programs into GX Pro, please read this blog: https://www.spooky2-mall.com/blog/how-to-load-the-program-and-run-generatorx-pro-standalone/

Source: https://www.facebook.com/groups/spooky2/posts/2754120898083129/

Q9: If you run too many frequencies at once does it confuse the body and prevent the benefits?

A: 1. You can make a custom remote preset containing various relevant programs, but it’s best to keep it under 4 hours in length, and then let it loop. In other words, it automatically returns to the beginning after four hours and repeats the same frequencies. The recommended runs = 120 passes, i.e. you allow the preset to run 120 times 24/7.

2. There is some evidence to show that an even shorter preset is more effective. I often make presets of around 2 hours, and let them loop 24/7 until I feel the benefit.
3. Just remember to monitor your reaction and pause if any Herx symptoms become too uncomfortable.
4. You should grade scan them to use only the ones that fit you.
   
   You shouldn’t load in more than 4 hours worth for remote. Keep it under 4 hours and run a few, then do the next few the next time or load it on a different remote.
5. It may be helpful, when loading multiple programs in one preset, that you check the ‘Remove Duplicate Frequencies’ button at bottom RHS of the programs tab/page. This often reduces the length of time quite significantly.
6. Stick to hunting and killing pathogens instead of fixating on what you have. Let Spooky heal you rather than attempting to analyze everything. Kill those found in BFB scans.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1282519578576609/

Q10: If we do herx during terrain, can we use a herx program to help?

A: Yes. Please check the link to know more:
https://www.spooky2support.com/hc/en-us/articles/115003065028-What-can-I-do-to-reduce-herx-reaction

Q11: Which one of the Remote Terrain Protocols is the most gentle one for a very sensitive person please?

A: In the Presets tab, under >Detox, >Remote, are 3 Low Power terrain protocols, each in their folder. If you click on that folder, you will find a PDF describing how to use the Low Power terrain. It comes with several power levels, each more powerful than the previous one. You start at the weakest level and work your way to the normal power level.The BEM terrain is the best if you are sensitive or don’t detox well. This detox lasts 22 days as it’s 12hrs detox and a 12-hour support programs. This gives you plenty of time to study and learn about your equipment.

To learn more about Terrain Protocols, please click below:
https://www.spooky2-mall.com/blog/spooky2-terrain-protocol-faqs/

https://www.spooky2-mall.com/blog/a-beginners-guide-to-detoxification-understanding-terrain-and-more/

Source: https://www.facebook.com/groups/spooky2/permalink/2884138131748071/

Q12: How do I know the best placement for the TENS patches? Thanks!

A: Please check the link: https://www.spooky2-mall.com/blog/tens-pads-placement/

Q13: When running terrain an my genx pro can I run another program at the same time?

A: Most people run a few or more times per year and it is recommended to run Terrain alone only. This way, the other frequencies will not affect the work of Terrain. Once you are done (after 11 days), you are free to run multiple programs.After the first time, you can do what you want. It is recommended to run alone the first time to ensure that you do not have excessive Herx and overload the detoxification pathways.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1912042158957678/

Q14: When using Terrain on Remote will programmes run automatically with the 6 hr breaks automatically?

A: 1. The protocol repeats indefinitely unless the user stops it or the computer malfunctions.2. If you run in Remote mode, it loops itself once 11 days over and you need to manually stop it.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1351778951650671/