Q1: What does it mean when the lights on the remote flash back and forth?  Opposed to when the lights are steady light?

A: 1. Some presets will cause the LEDs to flash between the 2. This is OK.

2. Remote LED will be caused by frequency, waveform, and amplitude and so on. When frequency below 30Hz, the LED will be flashing. Please check below link for How Does Spooky Remote Light:
   https://www.spooky2-mall.com/blog/how-does-spooky-remote-light/

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1353856598109573/

Q2: I’m running the detox protocol & get a Gen error a lot.

A: Please check the link to see what our users said about it:
https://www.spooky2support.com/hc/en-us/articles/44674067358107-Generator-Errors

Q3: When loading the DNA into the remote. If you want to use saliva instead of a finger nail how do you put that in the remote?

A: Saliva: cut a strip of blank paper (blotting paper is best) about two inches long and one inch wide. Place the top one-third of this in your mouth for about five minutes, or until it becomes saturated with saliva. Allow it to air-dry for about 10-20 minutes before placing it into your Remote. Good for about three days.

Q4: Do you have to put the sample inside those shiny stickers?  Or do you put it directly in?

A: if your sample is to be the lone occupant of the remote. Stickers came with the remote so why not use them? Putting the nail piece in the sticker with the date is a good idea. I use just one sticker and fold it over. Others, less thrifty, use two stickers per sample.

2. Masking tape works to keep separated.

Q5: How long does the DNA last from nail clippings?

A: the DNA contained in fingernails is encased in hard keratin which protects it from degradation. In theory, it should be good to use for scalar transmission forever, and indeed some practitioners never change their specimens.

Since photonic energy is closely linked to DNA, nail specimens may need periodic renewal. While the physical DNA remains intact, Russian experiments show that the photonic energy “imprint” which “shadows” DNA may fade over time, though nails are generally preserved for several years without significant degradation.

For more details, please check the link:
https://www.spooky2-mall.com/blog/what-source-of-dna-for-remote-rife-and-how-long-it-lasts/

Q6: How do you set up your own presets for special treatments?

A: The Target Preset is Preset you create that contains the programs that treat your specific kind of cancer, i.e., breast cancer, prostate cancer, lung cancer, etc. You can create your Preset by starting with Killing (R) – JW, add programs from the Programs tab and then save the Preset using the Save button (floppy disk icon) in the Presets tab. This Preset will end up in your User folder. Then in the Cancer Tool, click the Reload button, and you should see your new Preset in the list.

For more information, please check this link:
https://www.facebook.com/groups/spooky2/permalink/1771178843044011/

Q7: How do I do BFB with the XM?

A: You can try the pulse scan.

The pulse uses the heart rate to monitor the body’s response to that frequency. Under ideal conditions, the only variable of change should be the frequency, but this is not the case. Most individual’s heart rate changes with normal body movements. Thus, when you do a pulse scan, you should try to keep your body still so that you can get more accurate results.

For more details, please check the link:
https://www.spooky2-mall.com/blog/four-ways-of-running-biofeedback-scans/

Q8: Can you run the terrain protocol and a cancer protocol at the same time on remote with the Pro?

A: Terrain is best run as a standalone however if you wish to help the flow of it you may also run Detox maintenance / support programs in conjunction.

To run Terrain and a Cancer protocol at the same time may be too much to a sick body to handle.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1421072781387954/

Q9: How to loop our list of programs?

A: If you choose remote preset, you don’t need to change anything, it will run non-stop. If you still want to change, please change the repeat chain to 0 in the newest software, don’t change repeat sequence now.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1377051479123418/

Q10: Do you run through the biofeedback with nail sample please？

A: 1. The two slides need to be less than the thickness of the paper apart. Whole nails will not work. Using powdered nails is a novel idea and should be ok, provided the slides are almost touching. The best method of making “nail powder” will be to use a nail file. You will be the first person to try this method, so please give it a try and report your findings!

2. The question is, what you want to scan. I doubt that you find pathogens in hair and nail. 

The digitizer is good with fluids. If you have bladder issues you can use urine. If you have throat issues then saliva and if your issue is all over the body, as for viruses, bacteria but also parasites, then take blood. 

Even if there is slight information on a virus in my nail or hair, to find it using current, a fluid is better that carries the real pathogen. Using the digitizer is not a kinesiology test. Current and Angle looks for the real stuff in the scanned object.

For more details, please check:
https://www.facebook.com/groups/spooky2/permalink/1035386769956559/

3. Some people say the powdered nail works, but really the SD was designed for bodily fluids, like urine, blood, saliva, and mucus. Using nail powder is an experimental procedure.

If you are using nail powder, it needs to be in a solution of distilled water. Without water, the SD won’t be able to read a signal. This is true of your bodily fluid sample too. If the fluid sample dries while you are scanning, you will not get good results.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1394429510718948/

Q11: How long do the holographic disk stickers last in terms of their potency after one is imprinted?

A: Imprinted holographic stickers can last for a very long time. They can last as long as they do not get wet, worn out, or exposed to the sun and strong magnetic fields.

Many like myself put them in a plastic coin holder and keep them in a pocket. They last longer. I use a plastic coin holder or a very, very small ziplock baggie.

You can find more related QA here:
https://www.spooky2-mall.com/blog/holographic-stickers-faqs/

More details here:
https://www.facebook.com/groups/spooky2/posts/2583561988472355/

Q12: hi what are the frequency sweeps?

A: A sweep runs through a range of frequencies, starting from one specific point and ending at another.

A sweep is used when you don’t know which frequency to use. You use a frequency sweep to kill an unknown or known pathogen. Pathogens can mutate and transform into other types making it very difficult to treat them based on typical symptoms of pathogen.

For more details, please check the link:
https://www.spooky2.com/forums/viewtopic.phpf=154&t=14696&sid=33c351ecd5e82004ad2a487339a65e53

Q13: How do you run the Generator Signal Test?  It shows it runs for 3:00mins, but I don’t see how to start it!

A: In the miscellaneous Presets, you will find an entry for the generator signal test.

Passing the signal test means your generator and remote are both working.

Failing the signal test would mean your generator or remote or both are not working.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1774685312693364/

Q14: Can Remote be hooked directly to the generator?

A: Yes, you can directly connect Remote to the generator, if you use Boost v2.0, it can increase in power.