Q&A of Nigel Ryan Spooky2 FAQs Training Course
Q1: I’m confused. . . are there two frequencies, one for support and one for killing? and how are they determined?
A: Generally speaking, when deciding which types of frequency to run in the Spooky2 generator, you must understand what caused or triggered your health problem beforehand. First, look at the name of the program/preset and the description attached to it. If the program/preset has the word “disease” attached to it, it’s highly likely to be caused by a pathogen. With a pathogen-related program/preset, it is usually a good idea to run the frequencies in Killing Mode. Bacterial, viral, or other biological factors may also indicate the frequencies are more effective in Killing Mode.
Healing Mode would apply to almost everything else that is not targeting a pathogen in the Spooky2 database. For instance, detox is more of a body-cleaning process without eliminating pathogens or bacteria. When you run a detox program, the frequencies are removing toxins and assisting the natural detox system in your body. You are not eliminating a pathogen in the process. Therefore, a Healing Mode is more suitable in this case. Energy-balancing programs, such as Chakra and physical toning (i.e. Songs of the Spine), should also run in Healing Mode.
Programs related to autoimmune and inflammatory diseases are special cases because they usually require both the Killing and Healing Mode. If you’re not sure, you can use Universal Square H-Bomb which is suited for killing or Healing – If in doubt you can use this preset with confidence. It is not stronger, it is just universal shell preset.
Source: https://www.facebook.com/groups/spooky2/posts/2744032399091979/
Q2: What’s the difference between the presets scan & run, and hunt & kill, please? are they same?
A: Please check the link for more details:
https://www.spooky2support.com/hc/en-us/articles/360023563933-What-s-the-difference-between-Hunt-Kill-and-Scan-Run
Q3: What do we do with MANY (25-30) Biofeedback results?
A: Firstly, make sure you “encase” your scan results in an appropriate shell … i.e. remote, contact, plasma, etc. Let’s assume you’re planning to run the results in remote:
(1) Go to Presets tab \ Shell (Empty) Presets \ Remote \ select one of the killing shells or the Universal Square H-Bomb.
(2) Move to the Programs tab, search your scan results, and double-click it/them down into the Loaded Programs pane.
(3) Move to the Control tab, click overwrite generator, choose your generator, and click start.
You can run your scan results constantly by remote until your next scan. Some people scan every few days before replacing it with the latest scan, some more frequently, and others do it weekly. If you choose a remote preset shell, it will automatically loop until you click stop.
Here is a blog about what to do after completing a biofeedback scan:
https://www.spooky2-mall.com/blog/what-do-we-do-after-we-get-results-from-biofeedback-scan-using-spooky-pulse/
For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1755170937978135/
Q4: For the coil, there has been some suggestion that there is a logo on one side of it, and it matters if that is “up” or “down”, on the skin
A: 1. Yes. One side has an imprint of BN. I remember the BN should be BODY NEXT TO to remember what side goes down. Also remember BN is the first and last letters of Body down.
2. YES! This matters. It’s already been answered above but I want to stress this importance, especially if using the PEMF wand for treating infections or illness. The BN (bio-north) emits a negative magnetic field. So obviously, the opposite side is the positive side. If you place the positive side over an infection, you could make it worse. Positive magnetic fields have been shown to increase cellular growth, especially in pathogens. Please do not make this mistake. You could do 10 sessions using the BN side of the PEMF coil and then one session where you accidentally use the opposite side can cancel out any benefit you may have had or make things worse.
For more, you can check the link:
https://www.spooky2support.com/hc/en-us/articles/115001075013-Does-it-matter-which-side-of-the-PEMF-coil-is-touching-the-skin
Q5: Is it ok to run 5 or 6 remotes on myself at the same time? Doesn’t my body get confused by all these frequencies?
A: Yes.
It really depends on each individual how many frequency sources via remote they can tolerate.
I’ve had myself and a few others on 9 remotes at once without issue. I usually only ever had 2 that were focusing on killing modalities, while the rest were on healing modalities.
To have 9 killing would probably be very taxing on the detox pathways.
It would probably be best to add one at a time and make observations to see how well it is received before you decide to jump in and start running every remote you have at your disposal.
For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1876182825876945/
Q6: With the XM Pro, which has 2 generators, how do you differentiate them on the software? How to know which is which, i.e., which one to overwrite?
A: 1. I recommend to connect one first, check which number it says in the software, then label the generator. Then do the same with the second one and you’ll always know which is which.
2. You can always do a signal test with the remote. In software, open Misc Preset folder to find it.
You’ll be able to ID the corresponding generator to the gen# in software.
3. There is an option to identify the generator within the software which puts the generator number on the generator screen at the last digit of the frequency number position. I don’t remember exactly where it is at the moment and am not at the computer to find it.
For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1570105163151381/
Q7: How can I set a program to stay on replay in remote?
A: In the Programs tab, at the bottom of the screen are options for Repeat XXX. If you set any one of those to “0”, it will repeat that until stopped. Most of us use “Repeat Sequence” to run programs via remote.
You may need to be careful, however, in running only one Frequency for many repeats. Some people are rather sensitive to one frequency running a long time without changing to something else. I need to have 3 or 4 frequencies in the rotation to allow it to run for a number of hours.
For more details, please check this link:
https://www.facebook.com/groups/spooky2/permalink/1099944576834111/
Q8: I keep getting generator errors when trying to run spooky central with my XM.
A: This is typically either a loose connection (meaning the cable is not secure) or a faulty cable, or micro-brownouts can cause this too. Have a look at the Errors tab.
But when this happens, shut down the computer, turn off the generators, then turn everything back on again.
For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1788538397974722
Q9: Does biofeedback determine new frequencies for programs to match your body of just list preset programs to run?
A: When the body encounters stress, it alters its electrical fields through the autonomic nervous system. The results are changes in skin conductivity and heart rate.
Telling lies to someone creates stress, and the results of this are easily picked up by a polygraph. There’s nothing the subject can do to prevent this since the autonomic nervous system is not under conscious control. And it doesn’t matter how slight or how minute the amount of stress is – the body reacts just the same.
So if you input an ultrasound sweep into a subject’s body, and one or more of its frequencies produces a sympathetic resonance from, say, a pathogen or a parasite, the subject will always have a low-level stress reaction. Which is picked up immediately and recorded by Spooky Pulse’s heart rate monitor.
When the sweep is done, Spooky Pulse will then go through its list of “hits” and sweep carefully around them to find the exact frequencies that produce these tiny stress reactions.
The final result will be a list of frequencies that can be saved as a set and used to deal with the problem effectively because now you have the right frequencies. You’ve found the truth. Without taking out a second mortgage.
It helps reveal what pathogens, bacteria, bugs, worms, virus, etc are in the body and then shows what frequencies are needed to program spooky2 to defuse them, like mold, Lyme, etc. It will tell what specific mold spore is in your body, accelerate healing, release brain fog and body inflammation, etc.
Q10: Does the re install lose your information already running on all your generators? If you lose power, is all information lost so that you have to start all over again.
A: If you install over the top, the installer will:
- Backup your existing Spooky2 setup in a dated directory.
- Install the new version, then migrate your user presets and your custom saved frequency programs.
Your saved biofeedback scan results will be retained. They are stored in the file C:\Spooky2\custom.csv if you wish to take a personal backup of this file prior to installing.
Your user presets are stored in the directory C:\Spooky2\Preset Collections\User if you also want to take a personal backup ahead of the install.
For more details, please check the link from:
http://www.spooky2.com/forums/viewtopic.php?f=8&t=7135
Q11: How many programs can be saved on a generator?
A: The GX pro can be used standalone, but the XM cannot.
You need to load programs into GX Pro from software and it will store 30 programs most per time.
Each program is limited to 200 frequencies. Inside one program, each frequency will be using the same waveform, amplitude, offset and duration (dwell).
For how to load programs into GX Pro, please read this blog:
https://www.spooky2-mall.com/blog/how-to-load-the-program-and-run-generatorx-pro-standalone/
Source: https://www.facebook.com/groups/spooky2/posts/2754120898083129/
Q12: What’s the difference between XM Generator and GX Pro? Can XM run high frequencies?
A: XM limit is 5 MHz but harmonics can be applied to reach higher frequencies. All database programs & presets are within the XM’s limits…. unless it specifically states its for the GenX Pro.
GenX Pro limit is 40 MHz. With using harmonics, it has show to reach 160 MHz.
The GenX Pro gives a more refined signal but otherwise, they are exactly the same. Pick programs & load into the generator.
I run database programs on XM and run BFB scans & their results on GenX Pro.
More information here:
https://www.facebook.com/groups/spooky2/posts/2685735978254955/
Q13: How many programs can I load into GX Pro at once?
A: You need to load programs into GX Pro from software and it will store 30 programs most per time.
Each program is limited to 200 frequencies. Inside one program, each frequency will be using the same waveform, amplitude, offset and duration (dwell).
For how to load programs into GX Pro, please read this blog:
https://www.spooky2-mall.com/blog/how-to-load-the-program-and-run-generatorx-pro-standalone/
Source: https://www.facebook.com/groups/spooky2/posts/2754120898083129/
Q14: What can I do when software does not detect the generator?
A: Go to Utils, install Gen X drivers (sometimes I have to do this twice) then rescan devices. And if it still won’t work, use a new USB cord.
For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1659123597582870/
