Q2: My mom has 7-8 pills a day. Can we put all of them on the receiver coil and imprint them into a single glass of water?

A: Absolutely. Group them together and try to get them within the small circle indicator of the receiver coil. If they extend beyond this circle, don’t worry. This is simply the ideal position. One research group places over 30 different oils and drugs on the coil and report great results. 

Q3: If I am using the scalar setup for transmitting say oregano oil, what amount of sample do I use?

A: For molecular scalar, you don’ t need much. Just a small glass dish with even a few drops should work for you. You can find some glass stopper bottles and put a few millilitres in them, but you probably don’ t need an ounce of anything. It’ s your scalar, so do what you feel works.

Q4: How long should we run MW frequencies? What’s the dosage?

A: These are experimental because our body will take what it needs and will pass on through what it doesn’t need. However, it’s a good idea to know what an overdose of any substance looks/feels like. That is indicative when you’ve reached your max.
I once heard that plasma 1-3x is close to one dose. Plasma is supposedly 20-40x stronger than remote. 10-20x stronger than contact. Does that mean running a frequency 20x on remote would equal one dose? No one is able to say. Seems like it would be too much.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1912352735593287/

Q5: Does Spooky2 emit EMF?

A: 1. EMF – as relates to radio frequency waves can be very hard on one’s health.

Spooky2 Remote does not use EMF or radio waves, but Scalar waves. These have not been indicated to cause any issues for anyone.

Even the Plasma energy from Spooky2 Central Plasma bulb, which is the most powerful and highest frequency, is more safe than other high energy sources due to Spooky’s ability to use no carrier or a Dynamic Carrier so the powerful frequency is always changing and is a harmonic of the desired frequency to assist in the work being done – rather than putting a single frequency out constantly that is just an aid to signal penetration, but may be damaging.

For more details, please check the link:
https://www.spooky2support.com/hc/en-us/articles/115000461974-Does-Spooky2-emit-EMF

Q6: Can you explain molecular weight? And how do you combine?

A: Molecular Weight (MW) is the main concept that refers to the average mass of a molecule.

It is calculated by averaging the masses of all naturally occurring isotopes of each element in the compound.

MW is measured in grams per mole (g/mol).

This value reflects the total mass of a molecule, considering the isotopic distribution of the elements.

For more about MW, please check this blog:
https://www.spooky2-mall.com/blog/want-to-harness-the-power-of-molecular-weight-frequencies-heres-how-spooky2-makes-it-possible/

Q7: Can you demonstrate how to imprint with the remote using the sticker?

A: Please check the link:
https://www.spooky2-mall.com/blog/another-magical-use-of-holographic-stickers/

Q8: Can I imprint frequency to water by PEMF coil?

A: Yes, you can. This is why there’s a hole in the middle. This hole was put there so people can put little vials of water inside. The idea is put this down on the table, put the vial inside the whole, then you run the frequencies.

If you want to do a larger amount of water, you put the coil there, and then you put the cup on the hole, or the water vessel on the top of the coil. And that works pretty well. And you just connect it to the generator and run the frequencies used to imprint in the water.

Q9: Can you use cold laser to imprint frequencies into water?

A: Yes, you can. And it’s actually very good. I’ve already touched on the Spooky Coil, and that can be used for imprinting frequencies to the water. You can also use cold laser. Possibly the best way would be using Spooky2 Cold Laser Wrist, because of the fact that it’s so large.

You can have a small glass of water. You can put it on the top of the water, so they can get benefit of five cold lasers all working together with coherent light placing over the top. The cold laser is a very good way of applying frequencies into the water. It’s actually better than the coil, where it can take only something like 10 seconds for the fast frequencies / the high frequencies. If you want to put lower frequencies into water, you choose the treatment time over perhaps an hour to the very low frequencies.

For viewers who aren’t very familiar with imprinting frequencies into the water, the idea is you treat the water, and then you drink a small part of the water. And that’s the convenient way of applying the frequencies directly into your body internally. So yes, laser can be used for imprinting frequencies and they can be done so very efficiently.

Q10: Why Longer Sessions Create More Reliable Effects For Imprinting?

A: I was the first trainer to present a webinar on Imprinting. My reason for mentioning that, is because my ongoing research has led me to new information very worth sharing. Originally, with the Ah Method, creating saved Programs at a 0.5 Dwell does get the job done – quickly. However, since that time I figured out the leaving the Dwell at its default of 180 seconds – and changing the Dwell Multiplier to .003 of a created preset (and also using the option of, “Out 2 Runs Every Second Frequency” – is a much easier way to go for the same results. The frequencies are still applied the same number of times in the recommended 5 passes. All good, right? Stay with me here. I know we are all about having the process of Imprinting go as quickly as possible . We do, after all, live in a microwave society. Things have to happen FAST, however the fastest choice is not always the best choice. While five full passes are enough to initiate an imprint, it may not be sufficient for stability over time. For more durable results, extend the session well beyond the minimum cycles. A practical range is 15–30 minutes for small materials, and up to 45–60 minutes for larger or denser imprint media. This ensures the frequencies are layered deeply enough into the substrate to resist fading or disruption. NOTE: It is not possible to “overexpose” a material in a way that ruins the imprint. Once the carrier medium has absorbed the information, continued exposure mostly reaches a plateau effect, where no additional strength is gained. Running longer than an hour is unlikely to add benefit and may slightly reduce clarity due to field blending, but it will not damage the imprint. Efficiency peaks around 30–60 minutes, so sessions beyond this are usually unnecessary. Also, Imprints will bleed into one another unless you store them properly: kitchen foil is the way to go. So there it is, you can do it fast and it will work, but if you do it for a longer time the imprinted material will contain more stable and reliable effects. I’ve written a more extensive paper on this, and perhaps in the future I’ll do another webinar on the subject. There it is: did I get it wrong in the first place? Obviously yes, but also no. I did not get the facts wrong, but at the time I did not know all the facts. The truth is that I learn from my mistakes, and I am very willing to make lots of mistakes.

Source: https://www.facebook.com/groups/spooky2/permalink/3206834322811782/

Q11: How long does an imprinted holographic sticker last? Any suggestions on how to keep the holographic stickers to stay on better?

A: Imprinted holographic stickers can last for a very long time. They can last as long as they do not get wet, worn out, or exposed to the sun and strong magnetic fields.

Many like myself put them in a plastic coin holder and keep them in a pocket. They last longer. I use a plastic coin holder or a very, very small ziplock baggie.

You can find more related QA here: 
https://www.spooky2-mall.com/blog/holographic-stickers-faqs/

More details here: 
https://www.facebook.com/groups/spooky2/posts/2583561988472355/

Q12: What is the maximum number of frequencies that can be imprinted onto a holographic sticker?

A: I’ll give you my perspective, and maybe it will help you arrive at your own conclusion.

A single well-defined frequency can have a beautiful structure — see cymatics.

A few well-defined frequencies can be also beautiful and structured — like a musical chord.
We tend to be able to hear when multiple frequencies do not sound good together, and their structure usually is not well defined either.

When you get too many frequencies co-existing together, it will approach noise – like white or pink noise.

Sooner or later, you lose the advantage of having a well defined structure from imprinting.

For more details, please check the link:
https://www.spooky2support.com/hc/en-us/articles/6393283172251-What-is-the-maximum-number-of-frequencies-that-can-be-imprinted-onto-a-holographic-sticker