Q1: What is the ideal tuning frequency?

A: To correctly tune Scalar, we need to turn the Tuning Adjustment knob counterclockwise until the Tuning Light beside the transmitter coil reaches its first maximum brightness. The first peak in the Tuning Light indicates that the scalar frequency has been found. The frequency range is approximately between 5.6 and 5.8 MHz.

Actually, there is no absolute “ideal” frequency for Spooky2 Scalar. Each installation may have a unique “ideal” frequency. All we have to do is turn the Tuning knob counterclockwise until the Tuning Light beside the transmitter coil reaches its first peak.

In reality, several factors will influence the optimal tuning frequency.

The length of the link cable can alter the tuning frequency. The cable is an integral part of the tuning circuit, and any changes in length may affect the optimum frequency.

Loops or kinks in the link cable also impact the tuning frequency. If we do not lay the cable straight, it hampers the flow of electricity and alters the frequency.

Electrically noisy environments can disrupt the tuning frequency. When we set up Spooky2 Scalar in a workplace, electromagnetic fields from other equipment can interfere with the pure signals of Spooky2 Scalar.

Seasonal changes can also cause variations in the tuning frequency. The frequency of Spooky2 Scalar can shift between sweltering summers and the depths of winter.

Q2: Why is the light on the receiver get brighter or dimmer when I place Scalar Harmony?

A: I think the coil in Scalar Harmony is inducing more energy back into the scalar field between the transmitter and receiver which is causing the receiver light to glow more brightly. The red LED on the transmitter is the tuning LED and similarly, it will glow brighter when you place Scalar Harmony on the Receiver.

You should be tuning the system with the Harmony in place. The presence of the Harmony will affect the tuning of the system, so tuning first, then adding the Harmony will cause the system to not operate at most efficiency. It would also make the light on the receiver dimmer. That’s normal.

For more details, please check this link:
https://www.spooky2.com/forums/viewtopic.php?f=39&t=15144&sid=ccec1ed45a28af0f3dea6e1fa66d7097

Q3: Is Rife Scalar the same power/effectiveness as Plasma or more?

A: 1. They are based on different working theories. Spooky2 Scalar is a Tesla device that transmits natural scalar energy rather than electromagnetic waves. Spooky2 Plasma delivers frequencies to your body via powerful electromagnetic waves.

2. Rife scalar is less powerful than plasma. Scalar is less than 24 watts, whereas plasma can be more than 30 watts. Regarding effectiveness, I think Rife Plasma is more effective than Rife Scalar in killing pathogens, and scalar is better in healing, but this is my personal opinion only.

3. I have found Rife Plasma is stronger and works better and faster in both healing and killing pathogens than Rife Scalar.

4. Based on my own and some friends’ tests, pure scalar is quite good for healing. Here is how I normally use my Spooky2 scalar. Sitting in pure scalar field when I feel like to balance Yin/Yang in my body, or balance my charkras. Put supplements on the receiver coil for nutritional gains. Using it with Spooky2 generator to pathogenic cleanse. In this case, I get both healing, killing, and nutritions.

For more details, please check the link:
https://www.facebook.com/groups/spooky2scalar/permalink/464848114088752/

Q4: Why can’t GX pro be in the scalar field?

A: When running Rife Scalar or performing scalar biofeedback scan, some power is lost in the Digitizer and GeneratorX pro, the link cable becomes more sensitive to the effects of earthing. So it’s suggested putting GX pro outside of the scalar field. But it won’t affect or cause interference to the scalar field if it’s in.

For more details, please check this link:
https://www.facebook.com/groups/spooky2scalar/posts/1315816932325195/

Q5: During the Scalar Digitizer Run and Kill, can I leave my nail in the field instead of staying in it myself? Is it possible to use my nail to receive treatment while running scan results?

A: It has been suggested that using your nail in the field may not be sufficient for the best results. According to John White, it’s most effective to run results in the way they were originally collected. For example, if you’re doing a Biofeedback scan using Scalar, those results are best run directly using Scalar, rather than through Remote or Contact mode.

While you can use Remote or Contact modes for certain scans, Scalar uses harmonics to bring frequencies into range, which can be less effective compared to the original method. For Killing frequencies specifically, it’s recommended to stay in the field, as it’s better aligned with the way the results were obtained.

Feel free to reach out to us at support@spooky2scalar.com
if you need more guidance! We’re happy to help you get the most out of your Scalar experience.

For more details, please check the link:
https://www.facebook.com/groups/spooky2scalar/posts/1914716222435260/

Q6: Can I use Spooky2 Scalar overnight? Will this giving me “too much” scalar energy?

A: Yes, you can. Normally it’s suggested to run Scalar for at least 1 hour during the day. You can use pure scalar for overnight treatment. Your body will absorb the energy it needs. If you put drugs on the receiver box, please pay attention and see if you have any discomfort. If you don’t feel well, you can stop and give your body a rest.

Source: https://www.facebook.com/groups/spooky2scalar/posts/1584468095460076/

Q7: Is it ok to move while in the field or must you be still? Is it ok to use a mobile phone/wifi while in the field?

A: Scalar allows movement in the field. Some people expand the field to enclose most of the house, so they are in the field much of the day.  But if you are doing BFB, you have to lie still.

Yes, working with electronics in the field is as okay as working with it anywhere…

Q8: Can we imprint holographic stickers using Spooky2 Scalar?

A: Yes, you can give it a try. If you want to imprint the sticker to receive the scalar energy, we’d like to recommend you put the sticker on the transmitter box, just like doing the frequency imprinting with scalar. The sticker will absorb the scalar energy. And then you can stick the stickers wherever you want.

More information about holographic stickers: 
https://www.spooky2scalar.com/holographic-stickers-faqs/

Q9: Can I put one box in one room and the other box in another room?

A: Yes, you can put them in different rooms, since scalar fields can travel through walls. We actually recommend it, as it makes the treatment area larger.

Source: https://www.facebook.com/groups/spooky2scalar/posts/1562346727672213/

Q10: Is the small circle of the coils the only place to put substances?

A: Best placement on small circle. If it is too large, then yes, it can be put in the large circle, but make sure it covers the small circle.

For more details, please check the link:
https://www.facebook.com/groups/spooky2scalar/permalink/453789911861239/

Q11: Can Spooky2 Scalar help with Lyme disease?

A: Although Lyme disease originates from an insect bite, symptoms are caused by an inflammatory infection that has a lot to do with the strength of someone’s immune system. What’s worse, external factors such as heavy metals, pollutants, and toxins cause a major burden on the immune system. So improving overall immunity with natural treatment is the key that scalar energy can help Lyme disease.

Scalar energy can provide optimal energetic support for the immune system and boost its capacity in protecting and safeguarding your body. Once your immune system works well, it can destroy the bacteria that do invade your body. Good immune system can disassemble and eliminate borrelia burgdorferi and the co-infections of Lyme disease, then the symptoms associated with Lyme disease will palliate or disappear altogether.

Scalar energy can also help the immune system combat stress arising from environmental toxins, heavy metals, infections and EMFs, which reduce the burden on the immune system. Better still, it can charge your cells and give them much-needed energy, which is the root cause that scalar energy can make you do not fall prey easily to diseases.

For more details, you can check this link: 
https://www.spooky2scalar.com/scalar-energy-for-lyme/

Q12: Should I keep using substances I’ve used for molecular scalar before or toss them?

A: 1. In my practice and many kinesiologists, we use test vials of substances for years and years on many people. I don’t think the scalar depletes the strength of the supplement. It just “beams” the energy of it. A big difference between the chemical component and the energetic component. One doesn’t affect the other.

2. I have multiple essential oils on my plate. Have had them there for nearly 3 years now. As long as they are still viable essential oils, they keep on producing. When it spoils (not by arbitrary replace by date, but actually spoils), then I’d replace.

A lot of factors go into when something will spoil. Heat, air, etc. My biggest barometer that is still working, is that on the input plate I have Cedarwood Atlas. Bugs do not like it. I can observe the behavior of any flying bug that gets into the house when the field is on, when the field is on with that oil, and when the field is off.

In each case, there are distinct behaviors observed. The Cedarwood Atlas acts like an energetic bug repellant. It also has had a devastating effect on the life cycle and size of those bugs that decide to remain in the field.

For more details, please check this link:
https://www.facebook.com/groups/spooky2scalar/permalink/881475365759356/

Q13: The questions about the dimension of the scalar field.

A: The scalar field balloons out between the transmitter and receiver. If the two are far apart, the signal becomes wider. The effective height is half of the vertical distance, calculated from the middle of the boxes.