Q1: Does the phanotron tube radiation penetrate walls? In a small house, will it reach other rooms, say, 25 to 40 feet away?

A: Yes, the Spooky2 Phanotron and Straight tube both work through clothes. They work through blankets, and through cardboard boxes. They also work across the room, and through the desk (plastic and wood), as well as through the couch.

We could detect a strong signal 60m away through concrete walls. Beyond a few cms the field of all plasma devices changes from near field to far field. Near field:0-15cm, far field:15cm-20 m. The near field is more effective. This is why we recommend having the tube close or even touching it.

Q2: How large area does the plasma cover?

A: Plasma produces two related fields. The one that does the really heavy lifting is the near-field, and this extends six inches from the tube in all directions. After six inches, it becomes far-field, which isn’t as effective as near-field, although it still works efficiently enough to disinfect and clear mold from a home.
So it still works on the body, just not to the same extent and power as near-field.

If you are unable to be within the near field, suggest you remain within 5 feet of the tube for decent efficacy. This is where I have most of my family when the tube is running.

I have affected targets further than this, but the field decreases in power as you go further away.

To give you an idea of the field, a WIFI router is only 1 watt of power maximum by law. You can see how large the field is with your phone. The plasma output from the Spooky2 Central is 40 watts.

This blog may give you some help: https://www.spooky2-mall.com/blog/what-is-the-effective-distance-of-plasma/

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/685653624929877/

Q3: When referring to “contact” is that using a separate generator?

A: When using the contact via the central you are getting one frequency only which is to open up the cell walls for better penetration. This should always be used in combination with the Phanotron bulb. Contact with tens via a generator gives you various frequencies you have programmed. Highly suggest you study the user guide as you are not utilizing your equipment if you don’t know how to use it.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/posts/2119549461540279/

Q4: Can I use the ultrasonic on my head?

A: Yes, Spooky2 Ultrasonic can be used on your face, and there is no risk. You can use Ultrasonic to do a facelift, but it has to work together with Spooky2 Central.

Q5: How are central treatments different from scalar?

A: Rife Frequency is the MOR frequency for a pathogen or an “entrainment” frequency for an organ or system, or a resonant frequency for a specific substance (usually a toxin) to shake it loose and allow the body to move it out. This frequency may be sent to the body using any of the transmission modes, Plasma, Contact, Remote, Laser, PEMF, Radionics – and whatever else comes out later. More information here: https://www.spooky2-mall.com/how-it-works/

Scalar waves are able to restore cell communication, exposing the diseased cells to the body’s defenses, and giving your cells much-needed energy to open and remove the blockages. It’s good for boosting your immune system so that your body is better able to fight or rebuild itself. A scalar field is created between the two boxes (Transmitter and Receiver) to restore your health. For more information about scalar, you can click this web page: https://www.spooky2scalar.com/scalar/.

Q6: How long do we run program? Is it OK to run any treatment for 1 to 3 weeks or months?

A: There is no maximum run time for a program or preset. But here are some guidelines. If you run a program or preset and your symptoms go away, you can stop. If you run something for 3 days and you see not improvement OR you don’t experience any new detox symptoms, you ought to stop and find another program or preset to run.

For more details, please check the link:
https://www.spooky2support.com/hc/en-us/articles/360008521954-Is-there-a-maximum-time-for-how-long-a-program-can-be

Q7: Can you run the scalar and the plasma tube at the same time overnight?

A: No, Plasma and Scalar are both very strong, so you may not be able to accept such a high level of efficacy output.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/posts/2173420576153167/

Q8: Do we need to wear protective glasses with Plasma tubes?

A: It’s OK, don’t worry about it. If you are worried as it does give off some UV, then just look away.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1678074885687741/

Q9: What are the benefits of running scan results on “current”, “angle” or “angle and current”?

A: I can give you a quick (well detailed so hopefully quick) description via an example.

When you take and pull out frequencies using current, we are looking for the ones that had the most change from the prior measured frequency.

When you take and pull out frequencies using angle, we are looking for the same, but using phase angle.

When you take and pull out frequencies using angle+current, we literally add the two measurements together and pull the frequencies from the combined metrics.

For more details, please check the link:
https://www.spooky2support.com/hc/en-us/articles/360002360834-What-are-the-benefits-of-running-scan-results-on-current-angle-or-angle-and-current

Q10: Is the plasma recommended over the heart for eg. for breast cancer and EBV?

A: Yes, you can.

Should not put tens by head, heart, or on joints. Plasma can go anywhere you like, different from contact tens pads.

Let’s look at what our users said:

Yes, it can be safe, I’ve actually preferred a non-rife, consumer-grade plasma ball for this.

I wish I had pics handy, I do not, but it makes a lovely magnetic pattern around the heart, in its arcing. It’s weird, the plasma actually flows within the pattern of blood in the heart. It is non-invasive, a sort of hypoallergenic energy, and quite nice.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1800761436752418/ 

Q11: Can l put XM and/or laptop on top of the Spooky2 Central?

A: No, this will put the laptop and the generator too close to the Central. In fact, you want the laptop and generator as far as possible away from the Central and even further away from the plasma bulb/tube.

For more details, please click this link:
https://www.facebook.com/groups/spooky2/posts/2439175902910965/

Q12: Is there one way to kill mold without a sample to analyze?

A: Yes, you can do this with Spooky2 Plasma. Preset: Mold and Slime 2 Day Home Treatment (P) – JW (Under >Environmental >Plasma > directory) Time: Two days each session. Run it until the mold is gone.

You can also put a wet paper towel out for overnight (or equivalent), then put that in the remote as the target.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/posts/2309361895892367/

Q13: Exactly how far away from the Central do I need to put the computer and the generator? 

A: If you have limited space, you can put Spooky2 Central on its side. The important thing is to make sure the ventilation holes aren’t covered. Make sure it has good ventilation. Of course, if there are conditions, we still recommend horizontal placement.

For more details, please check the link:
https://www.spooky2.com/forums/viewtopic.php?f=83&p=157885#p157885