Q1: Is there a way I can prevent the spooky2 software from jamming up every time I get a generator error. The whole system freezes and I have no option to do anything except close it.

A: This is typically either a loose connection (meaning the cable is not secure) or a faulty cable, or micro-brownouts can cause this too. Have a look at the Errors tab.

But when this happens, shut down the computer, turn off the generators, then turn everything back on again.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1788538397974722

Q2: Can I do the Plasma or Contact treatments at night when I am sleeping?

A: Yes, many people do that, Keep in mind the Plasma bulb must be within 6 inches of your body to be most effective.

Q3: Can the hand cylinders be used for biofeedback instead of pads on the abdomen?

A: Here are some ideas shared by our users:
https://www.spooky2support.com/hc/en-us/articles/4406191765915-Will-the-BFB-scans-still-be-fairly-accurate-using-hand-cylinders-instead-of-TENS-Pads-when-used-on-my-8-year-old-grandson

Q4: What if the cancer is on the head, where can you put the tens pad for BFB scan?

A: When targeting areas of the head, use the areas of the shoulders for pad placement. This gets the electricity closest to the area to be targeted safely.

Please check the Tens pads placement from the link:
https://www.spooky2-mall.com/blog/faqs-on-tens-pads-placement-and-more/

Q5: Can I do the Cancer DB protocol while getting conventional Cancer treatments?

A: NO you should not do that. You can do some amount of support treatments like Enhance Kidney Function if you want to. Otherwise wait until your conventional Cancer treatment is complete before starting the Spooky2 Cancer protocol.

Q6: I have a 3-day weekend. Can I take a short vacation from treatment?

A: You should not take a vacation from treatment. Cancer never sleeps and will become more resistant to treatments during your break. However Spooky2 equipment is very portable so you could take it with you.

Q7: I can’t sit around for 4 hours for a treatment. What can I do?

A: You can pause the Plasma or Contact mode treatment and resume later. Remember you need to complete at least 1, preferably more,  full Pxx or Cxx run during the treatment time as specified in the Checklist.

Q8: What if I only have 1 Generator or I can only afford 1?

A: Some people have been very successful with only a single generator. However, complete treatment will take much longer. Consider that the Plasma is 50-200 times more powerful than the Remote.

Q9: When running two remotes at the same time.  Am I correct we need to make sure the two remotes are not running the same frequency at the same time? Other trainers, with multiple remotes, we needed to stagger start times.

A: You can run two different programs on two remote at the same time, no problem. But for the same programs, we suggest to run them 5 minutes apart from the start time.

If you run multiple remote generators on the same nail the same exact program at the same time, the body receives the frequency 1x.

If you staggered all the gens by 5 minutes (default dwell is 3 minutes so this gives a 2 min break between frequencies), then the frequency received is pounding on just about the same as if you loaded 1 gen with 1 or 2 frequencies and repeated it 100x (or whatever # generators you are using).

Must beware of repeating the same frequency due to frequency toxicity which is running a frequency too many times over and over then Herxing from it.

One can also overkill and have too much die-off. This die-off can resettle in the body if it is more than the body can get rid of and make one sick.

For more details, please check:
https://www.facebook.com/groups/spooky2/permalink/990378064457430/

Q10: Should all bfb scans be run on G1 without a booster, even when doing a hunt and kill?

A: It is not recommended to use with the BFB process as when the boost is wired in, the other connection points will act as antenna to pull in environmental noise and inject it into the circuit. The GX is sensitive enough to be able to measure this noise.

Q11: What if the cancer is in someone’s left breast, or some other location near the heart?

A: It is not a problem if it is not through the heart. For example, if it it the breast, you are gonna to put the pads on either side of the breast, that is not going through the heart. As long as the heart is not in the direct path between the pads, you are in a good shape.

Q12: Can you run both biofeedback scans at the same time?

A: No, you can only run one biofeedback at one time even thought you have multiple generators.

Q13: How can i load infor to Gen Pro?

A: Here is a video:
https://youtu.be/G8TU7U7l7h8

For more details, please check these two links:
https://www.spooky2.com/forums/viewtopic.php?f=115&t=9083
https://www.spooky2support.com/hc/en-us/articles/360000895774-How-to-load-programs-into-GeneratorX