Q2: Can I run Plasma the same time as Scalar with generator X Pro?

A: No, you can run some Rife products and Scalar at the same time, except Plasma. Plasma and Scalar are both very strong, so you may not be able to accept such a high level of efficacy output.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/posts/2173420576153167/

Spooky2 Scalar is a Tesla device that transmits natural scalar energy rather than electromagnetic waves. A scalar field is created between the two boxes (Transmitter and Receiver) to restore your health. We believe that one of the root causes of disease is a blockage in our energetic pathways or chakras. When there is a blockage, the local metabolism slows down, and the body structure becomes less energetic. It is less capable of removing chemical waste, causing further build-up of toxins in the same area. This vicious cycle will repeat. Scalar fields are the natural fields that cells use to communicate. It helps introduce energy, which restores this communication, exposing the diseased cells to the body’s defenses.

Spooky2 Plasma delivers frequencies to your body via powerful electromagnetic waves. That’s why it is best used for killing. It’s the only machine we know of that can transmit frequencies of up to 3,500,000Hz (3.5MHz) without needing any wasteful and potentially harmful fixed carrier frequency. Most parasites, viruses, candidas, molds, etc. can be killed right away if the right frequencies are applied. When Spooky2 Plasma is applied at a distance, it can also be good for healing.

In summary, both Spooky2 Scalar and Spooky2 Plasma are very powerful in helping restore health. But please be careful and try not to apply the usage of both at the same time.

Q3: Why do you need to override the generator?

A: The “generator overwrites” tickbox is a just a choice that the software puts up to the user (you).

If you tick this box and the click on a channel, then the s/w will copy the currently shown settings in preset, program and generator setting tabs into a specific area of the computer’s memory related to that channel.

If you do not tick the box, then it will leave the memory as it was. (and… the preset, program and generator settings tabs will revert to what was stored previously for that channel)

Once you press start in the channel box; Spooky will use what is in memory and transfer the settings, waveforms etc. to the related XM generator.

So, ticking the “generator overwrite” box and then selecting the channel could be translated to mean- “do you want to use the new settings with this generator”.

If you click on a generator you will either want to:

1. Open it up to see what is currently loaded (do not check overwrite).

2. Upload a new program to the generator (overwrite the current program, check overwrite).

For more details, please check the link:
http://www.spooky2.com/forums/viewtopic.php?f=71&t=5831

Q4: Can you use spooky if you have (1) mercury fillings (yes am getting them removed shortly) (2) crowns? thanks!

A: I think we can. Seriously, the only mercury that should get stirred up is what is within the cells targeted by the DNA in the remote… Since the filling is not within a cell, it should not be affected at all.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1383243031837596/

If you are really concerned, you can also use another terrain protocol, which is the Terrain-Mercury preset. It is a subset of the Terrain preset. The Terrain-Mercury eliminates all the mercury-detox related frequency from the Terrain preset. The Terrain preset has the mercury-detox frequencies. The mercury frequencies don’t release the mercury from your fillings, but instead, help your body detox mercury. The reason people asked for the mercury-free version of the Terrain preset was that they still had mercury fillings, and the people thought the detoxing of mercury would be very painful (it could be) and not something they want to engage in at this time.

The more mercury you leave inside your blood/tissue/organs, the harder it is to get healthy.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1234793626682538/

Q5: Does Spooky2 Central fix Lyme disease?

A: Yes, we can use central to deal with Lyme disease. Let us hear what our user said about this:

The Spooky2 Central unit with Phanotron is the strongest device we have. It is a personal decision. Although I have the Spooky2 Central I use 4 generators to do that program remotely. I’m getting ready to do it again. It can also be done on 2 generators. The GX is our new addition and does amazing 6-minute full-body scans. It would allow you to do the 2 generator method but not only would take a long time but ties up your unit for months. If you could get extra generators, that would work so you can address other health issues while running M&L.

For more details, please check:
https://www.facebook.com/groups/spooky2/permalink/965148263647077/

Here are some tips for you:
1. It is suggest you keep running biofeedback and results on contact for faster results. Also, join the Spooky2 Lyme group for information on treating it. The graded Lyme protocol addresses Epstein Barr as it’s a coinfection. A grade scan is great if you have an exact diagnosis. Since you are changing with every treatment the biofeedback is a great tool. If you run results on Contact 2 times per day then you can rerun every 3 days.
https://m.facebook.com/groups/492372020911612/

2. Using nighttime Morgellons and Lyme protocol. Remotes on top of that: anything you think is necessary. Daytime: contact sessions for as many things that you feel are necessary doing scanning, grade scanning and hunting and killing too. Basically, throw as much stuff at this as you can and listen to your body in the process. Take a break if you Herx, then get back into the ring and fight again. On top of that do as many other alternative health things as you can.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1873963366098891

Q6: When using Tens Pad with central, where do I put the Tens Pad? eg issue area?

A: Tens placement is a user decision. The recommended location of left ankle / right wrist is a general starting point to target the entire body. Makes sense as the electricity has to flow from one end to the other, thus providing coverage across as much of the body as possible.

It has already been stated in many locations including the user guide that if you have a known targeted area to address, that the best placement is to bi-sect the area in question.

For example, if you are targeting your spleen, place the TENS pads on the front and back of the torso where the spleen is located. This focuses the path of electricity to go through the area you are intending to target.

With areas above the neck, it is also stated not to use the TENS pads directly as the head is a very bad place to send electricity through. There is also the matter of resonating the area around the carotid arteries. While rare, it is possible to lock the muscles if you do something incorrectly and constrict the blood flow to your brain.

Not a great situation to be in. Therefore, when targeting areas of the head, use the areas of the shoulders for pad placement. As this gets the electricity closest to the area to be targeted safely.

Please check Tens Pads Placement from:
http://www.spooky2-mall.com/blog/tens-pads-placement/

Q7: How long can you safely run the central plasma at one time if you are sensitive to energy?

A:1. I believe if you put in the preset for your condition and load up your generator and before starting it look at the program towards the top and it should tell you how long it will take. If you don’t have time for the treatment then unload the programs from the generator and start over.

2. I would have it touching the area of concern. I would run it for 2-3 hours per day depending on if you herx or not. If you herx, you need to go slower than that. I would also switch up the freq and not run them the same for more than a few days at a time, alternate them.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1545570065604891/

3. It is up to your body, but also up to what sets you are using and how your level of infection of the different types of pathogen is being affected. Sometimes we just have to go by feel.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1615645905263973/

Q8: What do the holographic stickers do?

A: You can use holographic stickers for frequency imprinting, for more, please check the link:
https://www.spooky2support.com/hc/en-us/articles/23454845469851-How-to-use-holographic-stickers-for-frequency-imprinting

Q9: Could Plasma be used for eye problems?

A: Yes, it could be. Here is the information shared by our user for your reference.

I have run “Eyesight To Improve (R) – JK” (Heal\Remote Preset) and found it helpful, but being a tinkering guy I supplemented that preset with some more programs. Within a short time I felt benefit of my custom set having a clearer, sharper vision and my eyes do not tire as easily as before by watching the tiny display on my mobile phone.

Details of my custom set:

XM generator with Spooky Booster + v1.1 Remote

Eye help (Cust)

Healing Shell (R) – JW

Programs:

Refractive Errors (ETDF)

Astigmatism (ETDF)

Diplopia (ETDF)

Vision Acuity (CAFL)

Vision Disorders (ETDF)

Vision Poor (CAFL)

Hyperopia (ETDF)

Cataract (ETDF)

Optic Nerve Diseases (KHZ)

Macular Degeneration Visual Acuity (XTRA)

Eye Floaters (XTRA)

Floaters (ETDF)

Total Run Time: 6:00 (runs continuously). It has been running now 138 hours.

For more details, please check:
https://www.facebook.com/groups/spooky2/permalink/1009153145913255/

Q10: Can you edit a program that has been saved?

A: Yes. 1. You can go to the software, then choose database – Edit Custom database #1. Then you will see all your own programs and you can edit or delete them.

May be an image of text that says ‘Spooky2 C) John White 20220707 ile Database Global Help Test Mode Utils Select Custom Database #2 Select Custom Database #3 Select Custom Database rograms Select Biofeedback Database Edit Custom Database Edit Custom Database #2 Edit Custom Database #3 Edit Custom Database Edit Biofeedback Database Refresh Database Write Database Text’

2. Go into the file explorer on your computer, then the spooky2 folder, then have a look at Data folder and Scandata folders. Also preset collections, then user folder. You can see files with the dates on and can delete them from there. Be careful not to delete anything that Spooky2 has put in. I have found that to delete completely and to get the files to disappear, I have to shut down Spooky2 and restart it. I’m no expert, so just giving my personal experience, so be very careful not to mess with other files.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/posts/2289112904583933/

Q11: Can plasma settings be used for healing modalities?

A: Yes, of course it can. Let us hear from what our user said about this.
I mostly use white Remote for both healing and killing. When I have a problem that needs more punch then I use plasma.

About 3 weeks ago I was suffering severe lower back pain so I ran Joint Inflammation (CAFL), Joint Inflammation (XTRA) on my plasma for 1 hour running at about 60 watts and sat with my back facing about 12 inches from the plasma tube sitting in a kneeling chair. This treatment reduced the pain significantly. I ran two 30 minute plasma sessions again the next two days and that was enough. In the meantime I was running both programs non stop on white Remote for about 2 weeks.

For more details, please check the link from:
http://www.spooky2.com/forums/viewtopic.php?f=71&t=6833

For program whose frequencies are all 100 kHz and greater, use the Advanced shell. For programs that contain frequencies fewer than 100 kHz, use the Entrainment and Healing shell.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1336421763186390/