Q1: Do you have any information on using colloidal silver in a nebulizer to help lungs and health in general?

A: Recent research has shown that colloidal silver has many benefits, which makes it a place in the medicine cabinet of all nature lovers. Colloidal silver has been used since the 20th century to treat conditions such as gonorrhea, epilepsy and colds. It is also used in eye drops to treat eye conditions. Colloidal silver compounds have been used as local preservatives, disinfectants and fungicides.

You can check out the details of the benefits of colloidal silver via this blog:
https://www.spooky2-mall.com/blog/health-benefits-of-colloidal-silver/

Besides, it can help with Pneumonia/Respiratory Infections, put one teaspoon in a nebulizer and inhale for 10 to 15 minutes; repeat three times per day.

For more, please check the link:
https://www.spooky2-mall.com/download/Colloidal_Silver_Brochure.pdf

Q2: I missed what the prefered PPM was?

A: Enter “PPM, ”which is the desired Parts Per Million. We suggest setting this to 20 PPM because this is regarded as the most effective concentration.

Q3: Can you talk about the dossage? Alsoboth for esternal and internause?

 A: Colloidal Silver is small silver particles suspended in a liquid. These particles are stable and suitable for both external (skin) and internal use. This form of silver is the most beneficial to the body. Spooky2 can make true colloidal silver.
Before using colloidal silver, the most important thing you need to figure out is your purpose of using it. The dosage of colloidal silver would be different, depending upon the purpose.

Dosage for a nutritional supplement

If you plan on using colloidal silver daily as a nutritional supplement, a normal adult daily dosage is about a teaspoon per day, or an ounce a day.

The specific dosage for each person depends on his body weight. Here is a formula to tell you how many drops of colloidal silver you can take each day safely.

12×lbs÷ppm=drops (per day)

For example, if you’re 120 pounds, and you’re using a 10 ppm colloidal silver solution, you’d multiply 12 times 120 = 1,440. Then divide 1,400 by 10 (ppm), which is 144.

So at a body weight of 120 pounds, you can safely take 144 drops of colloidal silver per day.

For more, please check the link:
https://www.spooky2-mall.com/blog/how-to-use-colloidal-silver/

Q4: How do you test it to make sure it’s correct? Mine has kind of large flakes, do I strain those off?

A: When the colloidal silver solution is ready, it may have a light yellow/golden color, which indicates a very small particle size. You can shine a laser light in the solution and observe whether a visible red line exists. If so, it indicates microscopic silver particles in suspension.

For more, please check the link:
https://www.spooky2-mall.com/blog/laser-light-test-on-spooky2-nano-colloidal-silver/

Q5: The silver rods arrived curled. do I straighten them? and you said clip them to container, not touching right?

A: No need, but remember to place two clean and shiny silver rods in the water. Ensure the distance between the rods is at least one inch or greater.
BTW, the silver rods are efficient whilst you can see them and dip them in water. They last a very long time.

Q6: So I could use the base and magnets to make structured water?

A: Structured water is to imprint frequency into water. Using the base and magnets are to make colloidal silver. They are not the same.
Here is how you can do it:
Place water in a glass container on top of the PEMF coil and run healing programs with no more than say 8 frequencies. High frequencies should restructure the water in one or two hours and very low frequencies like Schumman Resonance may take a day or two.

Please check this blog to see how to make structured water by Spooky2 coil:
http://www.spooky2-mall.com/blog/easy-spooky2-frequency-imprinting/

Q7: Why do we need the magnetic Stirrer?

A: If you are going to make quality Colloidal Silver or Nano Silver, one essential step in the process of making quality Colloidal Silver or Nano Silver is to stir the solution. So this magnetic stirrer (lab stirrer) is just the right piece of equipment that you need for making the best quality Colloidal Silver or Nano Silver. Why? Because the water needs to be stirred to ensure the silver particles are evenly distributed, and you do not want to wake up every hour, that’s why a magnetic stirrer is needed.