Q2: How to do biofeedback scan step by step with sample digitizer?

A: Spooky2 Sample Digitizer can be used for direct GX scanning of biological samples (urine, saliva, blood, etc.). You are not required to be connected by wires. The result of a sample scan is accurate, due to the high ratio of pathogens within the sample. Spooky2 Sample Digitizer is better suited than TENS scans for finding pathogens in your body.

For more about the detailed steps, you can check the links: https://www.spooky2support.com/hc/en-us/articles/360014536654-How-to-do-biofeedback-scan-step-by-step-with-sample-digitizer-

https://www.spooky2.com/forums/viewtopic.php?f=115&t=10346

https://www.spooky2videos.com/video/how-to-run-sample-digitizer-scan-and-run-preset-using-remote/

Q3: Are the contact tens pads one-time use only?

A: No, you can reuse them until they no longer stick to the body.

For more details, you can check the link: https://www.spooky2support.com/hc/en-us/articles/360058775474-Can-the-tens-pads-be-re-used-Can-I-use-my-pads-on-other-people-

Q4: After performing a Biofeedback Scan I cannot see any results.

A: If you see no results, you could change “Threshold” in the Control tab to 0 to see if more results come. You could also try change “Current” to “Current + Angle”. Click Analyze button and select latest BFB scan file. Analyze+ will display up to 20 hits, Analyze 10 hits.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1182484878580080/

Q5: Can I do Terrain with plasma and contact of Spooky2 Central together?

A: Yes, you can do Terrain with plasma and contact of Spooky2 Central together.

Spooky2 Central’s Contact Mode (SC Contact) can be used together with plasma mode for maximum efficacy. What makes it so unique is that it adds a 320-volt energy spike payload at the end of every magnetic pulse. This lasts for half of one-millionth of a second (.5 microseconds), causing an instantaneous split-second reversal of every cell wall’s electrical charge. With human cells, this opens up the cell “doors,” allowing plasma’s lethal energy to reach right inside and scour it clean of invaders in microseconds.

Q6: How long and how often to use contact, remote and plasma?

A: We recommend taking things slowly. The program running time depends on the dwell and number of frequency sets you choose. Everyone has different conditions. Listen to your body. If you feel tired and / or unwell, take a break and reduce your treatment times.

For details, please check the blog:
https://www.spooky2-mall.com/blog/how-long-and-how-often-to-use-contact-remote-and-plasma/

Q7: Can the cold laser be used for sinus congestion? (Or is it too near the eyes)

A: Cold laser twin can be used for sinus congestion. However, please don’t use cold laser shine in the eyes. You can ware the black glasses when you use cold laser.

For more details about the cold laser, you can check the link: https://www.spooky2-mall.com/blog/spooky-cold-laser-instructions/

Q8: If DNA in nails last years why do we need to change out often?/Is there an alternative to nail clipping for sample such as hair?

A: Because your body may generate some changes after treatment, we better change the nails every month to make sure the treatment effect. We can also use the hair, blood, saliva and so on.

For more details about the DNA sample, you can check the link: https://www.spooky2support.com/hc/en-us/articles/115001622874-Can-fingernail-DNA-samples-be-preserved-for-long-time-

https://www.spooky2-mall.com/blog/what-source-of-dna-for-remote-rife-and-how-long-it-lasts/

Q9: What is “Spooky2 Pulse”  and if I have both XM and Spooky2 X Pro,how does it compare?

A: The right frequencies can work miracles. The problem is that too many people are using the wrong frequencies. Well, not anymore. Now here is Spooky2 Pulse, which could run biofeedback scan and help you find the right frequencies you need.

To help you get better understanding of Spooky2 Pulse, we present you this instruction.
https://www.spooky2-mall.com/wp-content/uploads/2019/01/Spooky2-Pulse-Instruction.pdf

For more details about pulse, you can check the link: https://www.spooky2-mall.com/blog/spooky-pulse-instruction/

Q10: Is it possible to use 2 generators for contact use at the same time? Can I use one on a treatment setting and one on a detox/healing setting at the same time but both on the TENS pads? (So I’d be using 4 pads attached to the body).

A: No. To do so creates a situation where electricity from one generator may flow into the other generator as it will take the path of least resistance.

For what you want to do, run the detox generator in remote mode while you are using the other under contact.

For more details, please check: https://www.facebook.com/groups/spooky2/permalink/604924539669453/

Q11: If DNA is left in a Remote with a magnet but no running frequencies, will people’s body be influenced by the magnet?

A: This is open for debate, as only changing magnetic fields seem to have biological effect. The magnetic gradient across a DNA sample is negligible. Fixed fields do have an effect, but this is not as great.

Q12: If we run these frequencies, will it interfere with the WIFI? Or we should stop the WIFI and then run frequencies.

A: No, they don’t interfere Spooky2 rife machine.

Q13: What’s the difference between “Hunt & Kill” and “Scan & Run”?

A: The Scan & Run preset starts with a BFB scan then run the scan results automatically on an allocated generator. After the program of scan results completes, another full biofeedback scan commences. This cycle repeats until the preset is stopped, or no hits are detected, indicating the pathogens in your body have been removed.

Hunt & Kill preset begins with a short biofeedback scan. The hits are then run on an allocated generator. In the subsequent scan/run cycles, the previous hits are re-analysed. Pathogens that are mutated are found and hit again. It does not matter how far the pathogens run. They will be found. And they will become targets. This preset keeps refining the first scan results and runs automatically until it is manually stopped or no hits are detected.

For more details, please check the link: https://www.facebook.com/groups/spooky2/permalink/1272366449591922/ 

Q14: For the remote mode, does the distance matter?

A: 1. Spooky2 Remote has no limit of distance. Quantum entanglement research shows not only is the distance unlimited, but nothing can block it, and the signal transfer speed is instantaneous, meaning faster than the speed of light.

For more details, please check this link: https://www.facebook.com/groups/spooky2/permalink/1109810382514197/

Distance is irrelevant. We live in Texas, USA and was able to treat someone in the Philippines. There should be no problem treating your grandfather in Ontario.

The distance of electromagnetic waves (radio) traveling is limited to the power of the transmitter. Scalar waves, used in Spooky remote, have no limit as far as we know, or at least they cover the whole Earth.

Scalar energy is an integral part of the structure of the universe. It’s inside you and me, planets and stars – everywhere – and Max Planck, the father of quantum physics, described it as a conscious and intelligent mind. When you input a signal to it, that signal instantaneously exists everywhere in the universe, unattenuated.

There’s no space or time involved because there’s no conventional transmission involved. Only connect – and you’re everywhere instantly.

For more details, please check the link: https://www.spooky2.com/forums/viewtopic.php?f=9&t=5528
https://www.facebook.com/groups/spooky2/permalink/717468578415048/

Related blogs:
Does Remote Rife Treatment Work?
https://www.spooky2-mall.com/blog/does-remote-rife-treatment-work/

Scientific Proof of Remote Healing
https://www.spooky2-mall.com/blog/scientific-proof-of-remote-healing/

Q15: What is the difference between running BFB and then a kill vs. doing a hunt and kill programme?

A: Scan and Run is the auto version of BFB then creating a kill program to run just once before a new scan. Hunt and Kill keeps refining the same frequency set found on the first “hunt” scan. If doing either, I direct the treatment portion to a generator with a boost.

For more details, please check this link: https://www.facebook.com/groups/spooky2/permalink/1811157455712816/