Q1: How do I detox for a very weak person with severe cancer?

A: 1. Do footbaths to help detox faster. Go slow with the killing but make sure to add pain freq to ease his comfort level.

2. If you decide to do a Terrain Detox, make sure you start with the ‘low power’ one. Level #1 is too much for some people. Drink LOTS of water and take Zeolite or Bentonite Clay or similar for bowels to help get rid of toxins as they are released.

3. In any scenario like this there’s always two ways to go, beat down the disease or build up the body’s defence, and from what you say I’d go with the latter. At least focus on the ‘building up’ gently part in the beginning if he’s feeling poorly.

As Regina says, I’d use vitamin c (as crazy as it sounds, it’s been recommended to me enthusiastically over the years by the few doctors I’ve met that actually know anything about nutrition).

Spooky2 can administer vitamin c (sodium ascorbate or ascorbic acid) with its molecular weight (MW) programs. But large doses in one go can send you to the bathroom! So best to do small doses every hour.

For more details, please check the link:
https://www.spooky2support.com/hc/en-us/articles/360049700233-How-do-I-detox-for-a-very-weak-person-with-severe-cancer

Q2: Are programs that run on humans also suitable for pets? Anything to note?

A: Let’s see what our users said about this:

1. Any preset or program can be ran on pets which is ran on humans. My pets do better @ 5v than 20v. 10v for killing is ok for short while.

2.I’ve noticed that if I select a preset that has an amplitude of 20V… my dog shows agitation. She weighs around 70 lbs. In the settings I lower it to 5V or 10V. If I select 5V I can run the programs 24 hours. If I select 10V I watch her and generally do 12 hours. On one of her biofeedback reverse look ups… Softtalk Essential Oils popped up. It’s for calming. I have run that for her when I know she needs calming and it works.

For more information, please check this link: 
https://www.facebook.com/groups/spooky2/posts/2538754506286437/

Q3: Can the 11 day protocol be run on the GEN x pro . Am I correct in understanding that each section has to be moved to the next day manually?

A: Yes, you can run terrain on GX pro. Please load the programs into GX pro, for details, please check this blog:
https://www.spooky2-mall.com/blog/how-to-load-and-run-terrain-protocol-using-generatorx/

1. If you are running terrain on the standalone mode you need to advance it manually. But if it’s connected to a laptop then it auto advances. You can check the preset number it might be

2. Which is the second day of metals in the chain?

3. The first 2 days and the first 2 presets of the Terrain protocol are Remove Metals. You should see a preset change after 24 hours from 1. Remove Metals to 2. Remove Metals. It is only after 48 hours that will you see the 3. Remove Chemical Materials run.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1694951344000095/

Q4: I did the terrain protocol when i first got my Spooky Generator Xpro.  Can i do the terrain protocol again? How often should I do the terrain protocol?

A: Yes, if you are in good health, it shouldn’t hurt to run it for a year, but I don’t think it is necessary. I think it’s probably better to run it periodically (say once a month) rather than continuously, as your body can become accustomed to it.

When you first start using Spooky2, we usually recommend doing a Terrain Protocol first. The Terrain Protocol is a carefully stepped detoxification process. The Terrain Protocol will remove heavy metals, chemicals, systemic toxins, bacteria, and parasites from the user and improve their liver, kidney, and lymphatic functions. After the protocol, your body will be rid of toxins and start to recover on its own. Also, Rife frequencies will be more effective because toxins could block and absorb rife frequencies, leaving less energy for your cells. That is why we suggest the Terrain Protocol before Rife treatment. You can find more information about Terran Protocol from here: 
https://www.spooky2-mall.com/blog/all-you-need-to-know-about-terrain-protocol/

For more details, please check this link:
https://www.facebook.com/groups/spooky2/permalink/1131337823694786/

Q5: What machine do you run the 11 day Terrian on?

A: 1. Your choice of mode to get frequencies to the body. Contact requires you to be connected to the generator for the period of the program.

Remote allows you to set it up, start it, and go about your business.

2.It’s an 11 day program, remote is the better choice. I’m running remote now.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/781198328708739/

Q6: I have amalgam in my mouth, which detox program I can try first and how to set up?

A: 1. Use Mercury terrain to detox before starting other treatments so that the mercury in the fillings doesn’t get affected. After that, tackle the mold through grade scans of relevant mold sets and run them via contact each day using a killing shell and when not using contact mode, use remote killing methods and maybe half a day on detox maintenance.

2. The gentlest detox is to run Detox / Remote / Detox Maintenance -JK. Run it 24/7.

Q7: How to resume terrain protocol after a power failure?

A: Get a UPS (Uninterruptible Power Supply), they have them at Amazon. This will give you 15 minutes to cleanly shutdown your Spooky system when the power goes out. When the power comes back on, turn on the generator, then the computer, the start Spooky. If the generator number is still the same as before the power went out, you can use the Resume button (to the right of the Start button) to continue where things left off.

More information here:
https://www.facebook.com/groups/spooky2/posts/2684266708401882/

Related blog: https://www.spooky2-mall.com/blog/how-to-resume-terrain-protocol/

Q8:Do I have to run detox maintenance between terrain?

A: The terrain is in-depth body cleaning and preparation of healing and the maintenance just keeps the good stuff ticking over while you kill things off.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1706743662820863/

Q9: Can you run Terrain detox while running another program?

A: It is suggested you run Terrain Protocol detox itself the first time. But in subsequent frequency treatment, another program can run concurrently with your terrain protocol. You can run whatever you want.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/posts/2170999793061912/

Q10: Should we choose the Killing preset only for BFB scan results?

A: GenXpro BFB results are for pathogens, parasites, bacteria, etc…. so they should be run in kill mode. The XM will pick up the lower frequencies easier and those can be run in heal or kill. Each of these settings is not far from each other so you can use dual, kill or heal.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/posts/2134440196717872/

Q11: How fresh do the nail trimmings for humans need to be. Do they need to be cut the same day as you are going to add them to the Remote?

A: Nail specimens may be best renewed each month.

For more details, please check the link:
https://www.spooky2-mall.com/blog/what-source-of-dna-for-remote-rife-and-how-long-it-lasts/

Q12: What does it mean if the red lights on the Remote attachment are red but not flashing?

A: Please be kindly noted that remote lights on one side, both sides or dim even off are often normal. It is related to frequency, amplitude, waveform you are using.

If you can’t make sure of that, please do a signal test with the generator.

For how to do a signal test, please check this link:
http://www.spooky2-mall.com/blog/how-to-test-generators-output-using-spooky-remote/

If the two lights on Remote flash back and forth, that means the remote is working fine.

Q13: Which chemicals and parasites does terrain target?

A: The Terrain Protocol prepares the terrain in your body to be more available or receptive to further Rife treatments. People often refer to “The Terrain Protocol” as if there was only one. There are actually three, Terrain – (R) BY,  Terrain-Mercury – (R) BY, and Terrain-Nonviolent – (R) BY. Each is designed to help people in need.

For more details, please check the link:
https://www.spooky2support.com/hc/en-us/articles/217108388-What-is-terrain-protocol

Q14: Does the Terrain Protocol automatically stop?

A: 1. The protocol repeats indefinitely unless the user stops it or the computer malfunctions.

2. If you run in Remote mode, it loops itself once 11 days over and you need to manually stop it.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1351778951650671/