Q1: If I download Terrain frequency in Laptop without connecting to Gen XPro, how do I load it into GenX Pro?

A: Here is a blog about How to Load and Run Terrain Protocol Using GeneratorX: https://www.spooky2-mall.com/blog/how-to-load-and-run-terrain-protocol-using-generatorx/

For more details, please check: https://www.facebook.com/groups/spooky2/permalink/949856165176287/

Q2: Is it possible to run terrain in two remotes at the same time for two people?

A: Yes, you can use paper tape to tape up each individual sample of DNA separately and put them in the same Remote to do terrain thus freeing up one generator.

Also, you can put two people’s DNA samples in one Remote if you run the same program for them, like Terrain. But notice that if one person has a serious disease, please don’t put them together and put his/her DNA sample in a different Remote.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1288158981346002/ 

Q3: How does a scan of DNA discover information about the pathogen or bio terrain?

A: Spooky2 Biofeedback Scan is a potent tool for listening to your body and identifying the best frequencies. A biofeedback scan requires a frequency sweep in the body and a system to monitor the results. The sweep will damage or kill harmful microorganisms and cause stress to your body. The system then recognizes the stress and records the corresponding frequencies as results, which you can use to treat your body accordingly.

For how to do BFB scan, you can check the link for details: https://www.spooky2-mall.com/blog/four-ways-of-running-biofeedback-scans/

Q4: What is the maximum distance of separation between the Scalar transmitter and receiver?

A: The scalar field balloons out between the transmitter and receiver. If the two are far apart, the signal becomes wider.

 We do recommend having the units as far apart as possible so the field becomes larger.

Q5:Should you do the terrain first when treating rheumatoid arthritis?

A: Yes, at Spooky2, we always recommend our users to run the Terrain Protocol Preset for detoxification before starting their Rife frequency treatment.  Detoxification is important before you run any Rife treatment programs.

Many people may not notice the fact that they have toxins build up in their body system. These excess toxins will actually cause physical and mental health problems such as chronic fatigue, headaches, insomnia and diseases. Many of these toxins come from things that you use or consume every day. For example, food, water, beauty and personal care products. Your surrounding environment may also affect your health conditions.

With all the toxins accumulated in your body system, Rife frequency energy cannot pass through your cells and organs effectively. Therefore, we recommend running the Terrain Protocol Preset to prepare your body for Rife treatment programs.

For more details, please go to this link:  https://www.spooky2-mall.com/blog/why-is-terrain-protocol-the-first-step/

For how to run Terrain Protocol, please check this link：  https://www.spooky2-mall.com/blog/how-to-run-terrain-protocol-by/

Q6: How can I work on Sinus problems when all advice says to keep the XM generator system away from the head?

A: 1. You need to run terrain first.

2. Bio cold laser would be the first choice.

Or you can have a look at some customers’ feedback: For sinuses, I’d use a combo of plasma and remote, but if you don’t have plasma then run relevant programs on remote long-term. Generally speaking, we’ve found remote highly effective, but it’s rarely a quick fix … it takes persistence … it’s a marathon, not a sprint. Another option would be to combine contact with remote.

You could also try the cold laser. John White talks about the relevant one at 0:50 of this video.
https://youtu.be/15a95t5x6yw 

For more details, please check the link: https://www.facebook.com/groups/spooky2/permalink/1744400392388523/ https://www.facebook.com/groups/spooky2/permalink/1679066928921870/

Q7: Can the Spooky2 system remote work across countries, when the patient says is in Europe and the Spooky2 system is in China?

A: Yes, it works.

Spooky2 Remote allows people to get treatments at any distance using the recipient’s DNA. The theory behind Spooky2 Remote is called “Quantum Entanglement”, which was mentioned as “Spooky action at a distance” by Einstein. The basic idea is that there are situations where two particles act as though they were connected, when in fact, they are at different locations, sometimes miles apart.

Experiments showed that when two photons were created at the same time and then separated from each other, something done to one of them would have an instantaneous effect on the other one. That is, there would be no time delay.

Now with the help of Spooky2 Remote, you can enjoy the benefit of Spooky2 energy balance programs at any time, anywhere as long as the power supply is stable.

For more information, you can check the links: https://www.spooky2-mall.com/blog/all-you-need-to-know-about-remote-mode/

https://www.spooky2-mall.com/blog/does-remote-rife-treatment-work/

Q8: How is Spooky2 Remote different from the Digitizer? I thought the Digitizer does the scan of biofeedback, and the Remote sends the program to the specific person whose DNA is being used.

A: Many users have asked about the differences between Spooky2 Sample Digitizer and Spooky2 Remote. This post will help you understand the differences between these two products in scan and treatment functions.

For more information, you can check the link:
https://www.spooky2-mall.com/blog/what-are-the-differences-between-spooky2-sample-digitizer-and-spooky2-remote/

Q9: How to use Hunt & Kill on Spooky2 Scalar? How do I set generators?

A: 1. The Scalar BFB scan results or Rife program(s) are sent to the generator USB port number that corresponds to the cable connected to the BNC connector on Spooky2 Scalar.
As an example from our user:
USB Port 7 is G1 on GX (my input channel) and I have cable connected to OUT1 which connects to Scalar Digitizer input on Scalar transmitter. I have no boost board fitted to G1.
USB Port 8 is G2 on GX (my output channel) and I have cable connected to OUT1 which connects to BNC connector on Scalar transmitter. I could connect a Boost board if I wanted to.

Re Hunt and Kill program.
The same applies as stated above. You need to set the port number in Settings tab that corresponds to your USB port assignment on your computer. In my example above I would make Output = 7 in Output Shadowing panel.
So port 7 is my input channel for BFB signal and port 8 is my output channel that sends BFB scan results to modulate the Scalar (tuned) frequency.

3. In the note of master preset, it says:
   “7. Select the Master preset and load into G1.
   In the After Scan frame of the Control tab, set ‘Run on Gen’ to the port number of G2.
   9. Start the biofeedback using G1.”
   You need to set G2 to run scan results manually.

For more details, please check the link from:
https://www.spooky2.com/forums/viewtopic.php?f=115&t=10625

https://www.spooky2-mall.com/blog/hunt-and-kill-in-spooky2-biofeedback-scan/

Q10: What is the difference between OUT 1 and OUT 2? And are OUT1 OUT2 in the booster the same as the generator?

A: On the generator, there are two independent outputs: Out1 and Out2, both can produce a unique frequency with independent waveform, offset, voltage, etc. Typically, they are used together (via the boost) to double the voltage range — from 20vac to 40vac.

Spooky2-XM Generator is a single generator and contains the two ports mentioned above.

Spooky2 GeneratorX Pro (GX Pro) has two generators and thus contains four ports. It is more powerful than Spooky2-XM Generator.

For the Out1 and Out2 port in Spooky2 Boost, you do not need to pay too much attention to them since they are rarely used. You only use them for special occasions.

For more details about the ports from Spooky2 devices, you can check the link: https://www.spooky2-mall.com/blog/explanation-of-different-ports-on-spooky2-devices/

Q11:Does Spooky have programs for metastasised colorectal cancer?

A: Here are some suggestions on colon cancer with metastasis from our users:

Liver Function Balance and Liver Necrosis 1

T Lymph Virus and White Blood Cell Stimulation to work better for the immune than Immune System Stimulation. Lymphangitis and Streptococcus Pyrogens is good to clean the blood.

Silymarin, from Milk Thistle, is the supplement I read that has the most power to help the liver
He should eat (if he can) only organic brown rice boiled till mush – about an hour or so. This is a macrobiotic cure for cancer to add to other suggestions.

Consider Colloidal Silver delivery via this method Chris. It will go straight to the Liver and into the bloodstream.

For more, you can check the link:
https://www.spooky2support.com/hc/en-us/articles/224532048-Any-suggestions-on-colon-cancer-with-metastasis-

Q12: Can Scalar BFB results be applied to the body through Scalar only, or can they also run on Plasma?

A: Yes, you can run these results anywhere. One thing though, the Scalar only scans up to 50 kHz.

For this reason, you might be better off doing a TENS pad scan.

However, there are cases where a TENS pad scan can’t be done, say like you are trying to scan for a brain parasite or you are trying to scan a pet with fur. In these cases where TENS won’t work, then Scalar is an excellent option.

On the other hand, John has said in the past that Scalar scan had amazing reverse lookup hits that matched known issues.

For more details, please check the link:
https://www.spooky2.com/forums/viewtopic.php?f=117&t=14533&sid=f16596b03a77fad43c2bc7629d5182da

Q13: Can PEMF or Cold Laser be used on head and tyroids? What are the differences in placement between PEMF, Cold Laser and Contact?

A: PEMF creates a pulsed electromagnetic field. The strength that the generator can produce is safe to use on the head.

Cold Laser does work by the frequency of the light emitted. Spooky2 uses 650nm red lasers. This wavelength has a frequency of 461,219,166,153,800 Hz. It is safe to use on the head with one caveat. Because it is a laser which is coherent light, the intensity of the light is far brighter than it appears. It can damage the eyes if exposed. So take measure to protect the eyes.

TENS literally stands for Transcutaneous Electrical Nerve Stimulation. It was originally designed to stimulate nerve and muscle tissue, and not to apply rife frequencies per se. The TENS resonation effect happens at low frequencies (below 20,000 Hz) and is why sometimes frequencies can be felt. It is not safe to use above the head due to the potential to cause harm if used incorrectly. If one were to use the right frequency and intensity, they could seize the muscles around the carotid artery and be unable to turn the device off before passing out for instance. For those who know what they are doing it actually can be used on the head. Just the consequence of applying current to the head can have serious consequences if done incorrectly.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/posts/2060859624075930/

Q14: My question is more about downloading known frequencies (frequency definitions) and loading them into the software.

A: You have to use Menu File > Create Program.
Type the Program name you want in the Program name field, type the freqs you want in the Frequencies field, separated by commas, without spaces, enter the default dwell time, and hit save.

After refreshing the database (Menu Database > Refresh database), the new set will be available.
You can read a complete explanation in the User’s guide, Pag. 76 of Spooky2_User’s_Guide_20161021.

The new frequency sets are located into your Custom Database, named Custom.csv by default. The main database can’t be modified by the user.

For more details, please check the link:
http://www.spooky2.com/forums/viewtopic.php?f=71&t=4949

Q15: Is it okay to skip the terrain detox?

A: 1. If you skip Terrain, your body may be too toxic for the frequencies to be absorbed well.

You may also get more sicker, as any healing done will be accompanied by toxin dumping, but the detox pathways are not optimized – or stimulated at all, so may not work well. Additional toxins being released into the blood without the detox pathways being able to handle it can cause extreme illness.

2.Terrain slowly – just pause when you need to so the body can catch up. Once you feel better, run for a while until you start to feel like it’s enough, then pause again… In this way, it will get done as you can.

For more details, please check this link: https://www.facebook.com/groups/spooky2/permalink/1810994902395738/