Q1: What do I need to do when I switch from Remote to Contact mode?

A: Most likely you would want to stop the remote program, select an appropriate Contact Preset, change the hardware – remove the remote and connect the Contact cable, then start the Contact Program.

When you change back to remote, stop the Contact Program, select the Remote Preset, change hardware back to remote, and start…

For more details, please check the link:
https://www.facebook.com/groups/spooky2/posts/2089853324509893/

Q2: If you are running the same program for say 3 people in remote can you put them all in together?

A:The fingernails can be put in one remote together as long as you’re going to run the same programs for them, but we recommend keeping them separate with different paper stickers. Please be kindly noted that it’s not suggested putting human’s and animals’ DNA sample in one remote. And it’s better not to put your DNA sample with people who have serious illness in the same remote.

Q3: How to rectify my port numbers?

A: Right click on the generator box in the Control tab. The question should come up about Central/Plasma. Choose the correct answer.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/posts/2104701236358435/

Q4: When you are running more than one program, which icon do you recommend clicking on to do that? As according to the icons to the right of the program.

A: There is no hard and fast rule. On a single generator, the more programs you add, the less time each program runs for any given period of time. If you have multiple generators running simultaneous programs, you don’t have this problem.

With a shotgun approach of running multiple programs, it is hard to know which program worked for you.

You might consider adding your biofeedback scan results among the set of programs you run at any given time.

Here is one customer’s experience:

On my GX I run what I call my maintenance program. After I have something under control I run it 24/7. I have over 30 programs on G1. Run time is 26hrs. It works very well. I run some critical programs such as pseudo tumor cerebri. I run it several times a day on G1. I just space them out.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1409711355857430/

Q5: I have created a program with multiple frequencies/programs in it by using save icon and naming it. How do I edit my saved program or delete it? Thanks.

A: 1. You can go to the software, then choose database – Edit Custom database #1. Then you will see all your own programs and you can edit or delete them.

2. Go into the file explorer on your computer, then the spooky2 folder, then have a look at Data folder and Scandata folders. Also preset collections, then user folder. You can see files with the dates on and can delete them from there. Be careful not to delete anything that Spooky2 has put in. I have found that to delete completely and to get the files to disappear, I have to shut down Spooky2 and restart it. I’m no expert, so just giving my personal experience, so be very careful not to mess with other files.

For more details, please check the link: https://www.facebook.com/groups/spooky2/posts/2289112904583933/

Q6: Does it matter if there is nail polish on the persons DNA sample? Should they remove the polish?

A: No, nails do not have to be polish-free. There is no DNA in the polish, and it doesn’t affect energy transfer.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1693632170798679/

Q7: When you place the PEMF coil on the skin, do you change spots, if you must use it 24/7?

A: Your choice. If the spot you are working on is focused, you don’t need to move it.

If the area you are working on is much larger, then moving it over time would be appropriate. However, you don’t need to move it as if you are massaging the area.

Depending on how many frequencies you are using (I just use 1 typically), you may wish to move it every 15m or after one loop of your frequency list has been applied.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/posts/2044850782343481/

It is better to do short time treatments more often than a long time treatment once a day.

For more details, please check the link:
https://www.spooky2.com/forums/viewtopic.php?f=11&t=8508

Q8: Can we use a drop of our blood on digitizer scan?

A:Yes, you can. You want the bodily fluid that will best represent your condition in terms of pathogen content. It could be mucus from your throat, or it could be your blood. It depends on the condition.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1511936752301556/

Q9: If using fingernail in the Remote and if the sample has other DNA from gardening, dirt etc is it possible that quantum entanglement with that DNA will also affect the therapy?

A: 1. You don’t have to clean the nail to put it in a remote. Dirt doesn’t have DNA, so won’t transfer the frequencies. DNA is not affected by UV light cleaner/disinfecting.

2. Just rinse it and dry it with a paper towel if you are worried.

For more details, please check the link: https://www.facebook.com/groups/spooky2/permalink/1687600811401815/

Q10: What do you do if you get a burn from TENS pads on the skin?

A:1. You could set polarity change every 60 seconds in the Settings tab, or set lower voltage, in order to avoid burns.

2.This could be acid build-up. If this is the case, make sure you’ve run the Terrain protocol, as this will help reduce this kind of buildup.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1708364645992098/

Q11: If GeneratorX has generator 1 being port 3 and generator 2 being port 4, where are port 1 and port 2?

A: It depends on what computer you’re plugging them into. A different computer might have the same generators as 5 and 6. It doesn’t matter what number they are.

Port 1 and Port 2 are generally reserved by the operating system to represent what used to be physical communications ports installed on older computers. Later these were no longer included and replaced by USB connections. Almost all old computers came with one printer port (LPT1) and two serial ports (COM1 & COM2) to connect a serial mouse and perhaps an external modem.

To use Port 1 and Port 2, you will need to override the default enumeration of the virtual COM ports created on the USB bus. The generators communicate using the serial protocol, which is being emulated on the USB bus. Why serial? It has been a long time standard used in industry, and the XMs were originally designed to be used in an industrial setting.

For more details, please check the link:  https://www.facebook.com/groups/spooky2/posts/2038623842966175/ 

Q12: What is the knob on the XM used for?

A:1. It’s for manually setting frequency as a standalone signal generator. If you’re using the Spooky2 software you don’t need to use the knob.
2. All buttons including the dial knob are for testing. One never needs to touch the buttons on the generator. All run through software.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1353973618097871/

Q13: Is the booster needed all the time?

A: No, it is not always needed. Generally speaking:
• use the boost when running contact & remote programs;
• do not use the boost when biofeedback scanning.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1884655551696339/