Q1: Can Central be run all night?

A: Yes, there is no maximum time. The Central can be used overnight, though we suggest shorter day treatments. This allows you to monitor your own health condition whilst using Spooky Central.

Q2: Have you used both Scalar And Central? What was your Favorite?

A: They have their own advantages, plasma belongs to Rife machine, which is very powerful for killing pathogens, Scalar uses the scalar waves to transfer energy into the body, which is very powerful for healing and is very good for boosting your immune system to fight disease.

Q3: I’ve figured out how to use the PEMF with a XM & Pro Generators, but I haven’t figured out how to use the Ultrasound. Can someone please explain that to me?

A: You leave the plastic cap on to reduce the power. The impedance of the ultrasonic depends on the frequency. Piezo speakers are capacitive. The capacitance of the Spooky2 Central peizo speaker is 1500pF.

The generator can drive the speaker directly because it is protected against overcurrents.

We have tested the piezo being driven by the XM generator directly with no amplifier. The power is reduced but it still works OK.

For more details, please see this blog: 
https://www.spooky2-mall.com/blog/spooky-ultrasonic-instructions/
https://www.spooky2-mall.com/blog/spooky-central-instructions/
https://www.spooky2-mall.com/blog/how-to-set-up-both-hardware-and-software-to-use-spooky-central/

Q4: If a person has Titanium Dental Implants can one use Central or Scalar?

A: Yes, all the modes are safe, but you have to remember to “turn it down” for contact sessions.

Electricity applied to the body will always strongly affect something as conductive as metal, and it can even cause it to ionise if the voltage is too high. I believe the unpleasant sensations I experienced were my body’s way of telling me, “Stop doing that!” Turning down the “volume” fixed the problem by removing the cause of ionisation – excessive amplitude.

People who have metal implants can use Spooky2 Scalar, which will not interfere with any metal implants since the scalar field passes straight through metal.

For more details, please check:
http://www.spooky2.com/forums/viewtopic.php?f=18&t=4678

Q5: When you say detox every three months – do you mean the 11 day terrain?

A: Let’s see what our users said about it:

I’ve run the Terrain protocol continuously for over 3 months, with no detriment. If you are in good health, it shouldn’t hurt to run it for a year, but I don’ think it is necessary. I think its probably better to run it periodically (say once a month) rather than continuously, as your body can become accustomed to it.

When you first start using Spooky2, we usually recommend doing a Terrain Protocol first. The Terrain Protocol is a carefully stepped detoxification process. The Terrain Protocol will remove heavy metals, chemicals, systemic toxins, bacteria, and parasites from the user and improve their liver, kidney, and lymphatic functions. After the protocol, your body will be rid of toxins and start to recover on its own. Also, Rife frequencies will be more effective because toxins could block and absorb rife frequencies, leaving less energy for your cells. That is why we suggest the Terrain Protocol before Rife treatment. You can find more information about Terran Protocol from here: |
https://www.spooky2-mall.com/blog/all-you-need-to-know-about-terrain-protocol/

Q6: If you have been doing detox with remote (11 day terrain completed), should you do more detox with central first before trying a treatment?

A: No. After terrain, you can do biofeedback scan to find the most suitable frequencies to your body. After the scan, you can directly run these found frequencies for 4-7 days, to give your body a best needed treatment. If you have something specific you want to treat you can either do bfb on that area or you can run related programs for that issue.

For how to do a biofeedback scan, please read this blog:
https://www.spooky2-mall.com/blog/four-ways-of-running-spooky2-biofeedback-scans/

Source: https://www.facebook.com/groups/spooky2/posts/2739361652892387/

Q7: Is a grade scan the same as a BFB?

A: Spooky Pulse gives you a unique way to rapidly evaluate pathogen program frequencies for effectiveness against your condition, allowing you to identify those that will be the most beneficial for you. This process is called Grade Program Scan. Note this doesn’t work with healing or detox programs.

When you identify which individual frequencies in a single program will work the best, and which ones won’t work so well, you can then eliminate the least effective ones from each program you grade, and create your own preset which will contain only frequencies which your body has confirmed will work well for you.

A grade scan is when you want to find out what frequencies are best for a specific person when there are too many to run at once. Of course, one needs to know what pathogen they are fighting to choose programs to begin with.

With the GX scan that works in 6 or so minutes, the Grade Program scan is much less important, in my opinion, but not everyone has that generator.

For more details, please check:
https://www.facebook.com/groups/spooky2/permalink/956417251186845/

Q8: Can you use plasma (tube or phanatron) anywhere on the body? Is there a place you can’t such as the eyes or the heart?

A:Yes, you can use plasma anywhere on the body, heart and brain are both OK.

Plasma produces two related fields. The one that does the really heavy lifting is the near-field, and this extends six inches from the tube in all directions. After six inches, it becomes far-field, which isn’t as effective as near-field, although it still works efficiently enough to disinfect and clear mold from a home.

So it still works on the body, just not to the same extent and power as near-field.

If you are unable to be within the near field, suggest you remain within 5 feet of the tube for decent efficacy. This is where I have most of my family when the tube is running.

I have affected targets further than this, but the field decreases in power as you go further away.

To give you an idea of the field, a WIFI router is only 1 watt of power maximum by law. You can see how large the field is with your phone. The plasma output from the Spooky2 Central is 40 watts.

This blog may give you some help:
https://www.spooky2-mall.com/blog/what-is-the-effective-distance-of-plasma/

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/685653624929877/

Q9: My difficulty is that my plasma central DOES NOT HAVE ANYWHERE to attach the Ultrasound. How do I use it or can’t I use it?

A: Please check the link:
https://www.spooky2-mall.com/blog/how-to-set-up-both-hardware-and-software-to-use-spooky-central/

Q10: Can you talk a little more on when to use GenXpro and/or GenXM?

A: Spooky2 has two kind of Generators, one is GX pro and the other is GXM.

For the differences between them, please check the link:
https://www.spooky2-mall.com/blog/what-is-the-difference-between-generatorx-gx-and-the-xm-generator/

Q11: How do you move BFB scan results to a different computer?

A: 1. Put them on a USB drive and they go straight to where you want.

2. You need to put it in the Scandata folder of Spooky2 software. Then you need to click on the analyze button and in the open window you will see your file. Write the name of BFB and click on the save icon. And now when you go to the program and search in the BFB file, you will see it. 

3. You can also just copy the saved frequencies from BFB analysis. It is stored in the file C:\spooky2\BFB_Frequencies.csv. If you have not yet saved any BFB analysis results on the new computer, you can copy the entire file over and it will restore your data. If you have saved some BFB analysis results, then you will want to probably merge them. You can do this using notepad.exe. It is a simple text file, with one frequency program per line. Don’t use a spreadsheet program to edit. 

4. Save the BFB results you made on this computer, please remember the directory where your files are stored, and then copy your saved BFB results to another computer, under the same directory, you will find them. 

For more details, please check the link: 
https://www.facebook.com/groups/spooky2/posts/2052634611565098 

Q12: Can l do a grade scan using Contact and then run BFB results using PEMF Coil?

A: Yes. Save your Grade scan BFB results and then use the Coil Shell (Empty) preset: Spooky Coil (Generator Direct) – JW.

For more details, please click this link:
https://www.spooky2.com/forums/viewtopic.php?f=115&t=15511