Q1: How do you get the most accurate biofeedback results?

A: GenX/GenX Pro Scans results record the changes of electrical signals. If there is a frequency resonating with a pathogen in your body, a subtle change in the electrical pattern will demonstrate a hit is detected and recorded in the scan result.

On average, the running time for a GenX/GenX Pro Scan is about 6 minutes, and the scan results are usually more accurate. GenX/GenX Pro Scan is more suitable for local scans compared with Pulse Scan.

For more details, please check the link:
https://www.spooky2support.com/hc/en-us/articles/360050937014-How-do-you-get-the-most-accurate-biofeedback-results

Q2: Can you use a Rife Machine if you have a pacemaker?

A: 1. Spooky2 Remote
Spooky2 Remote is possibly the safest means of applying healing frequencies to the body. If you have metal heart stint and want to do a metal detox, it’s safe to use Spooky2 remote. Metal used in surgeries and implants are very stable. They do not deteriorate or change composition over time. Titanium and stainless are two such examples. It is perfectly safe to run the detox protocols with stints, staples, pins, or other metallic objects in the body.

2. Spooky2 Contact Mode
Electronic implants like pacemakers can be problematic when using contact mode. Also, metal implants may make contact mode uncomfortable.

3. Spooky2 Plasma
Do not use Spooky Plasma with pacemakers or other electronic implants. Plasma is safe to use with metal replacements.

4. Spooky2 Ultrasonic
Safe for those with pacemakers, other electronic implants and metal replacements. Sound is not magnetic or electric by nature. No electronics will be affected with the high frequencies emitted by the ultrasonic transmitter.

5. Spooky2 PEMF Coil
Because of the magnetic component of the signal, PEMF is NOT safe for use with pacemakers or other electronic implants. While PEMF is safe to use with metal replacement.

For more details, please go to this link: 
https://www.spooky2-mall.com/blog/are-all-the-spooky-subsystems-safe-for-pacemakers-other-electric-implants-or-metal-replacements/

Q3: If you use scalar and you were lying in a metal bed, would this affect the scalar field? Making it less strong?

A: The metal bed would have a slight effect, but the scalar field can travel through metal and not be greatly affected. However, the link cable should be kept away from the metal, as regular EMF flows through this cable.

Q4: Do we need to run baseline before biofeedback on scalar?

A: I think the only reason one would need to do a baseline scan is if they are in an environment that is polluted with electromagnet smog like in a house with a lot of electronic stuff like smart meters, wifi motors running, etc. I have my Spooky2 set up in an RV that is isolated except for an extension cord to run the Spooky2 equipment. So I don’t bother to do a baseline scan. But I sometimes wonder if the Spooky2 equipment also creates its own electromagnet smog that interferes with the scan.

Q5: What is the difference between a “grade scan” and a normal scan?

A: A grade scan is when you want to find out what frequencies are best for a specific person when there are too many to run at once. Of course, one needs to know what pathogen they are fighting to choose programs to begin with.

With the GX Pro scan that works in 6 or so minutes, the Grade Program scan is much less important, in my opinion, but not everyone has that generator.

For more details, please check:
https://www.spooky2-mall.com/blog/understanding-different-types-of-biofeedback-scans/

Q6: How do you clean tens pads and how long do you find they last?

A: Mild soap and water let dry.

You can use it for about 20 times. They can be reused. You can use it until TENS pads are not sticky. After each use, you can stick them onto the plastic sheet that they originally came with.

1. They will last as long as you can keep them sticky. Over time they will either pick up too much residue and/or dry out. Keeping them stored in the bags when not in use will prolong life. You can gently rinse the sticky side with water and let dry for a day, while stuck to the plastic storage square, to remove excess dead skin, etc. This will prolong their life once they start to lose their stick. It has also been reported that you can use an essential oil to keep the sticky side hydrated and clean prolonging life.

For more information please check this link:
https://www.facebook.com/groups/spooky2/permalink/757258204436085

Q7: How do you delete old biofeedback programs?

A: The raw scan data files are stored in the directory C:\Spooky2\ScanData. You have to use the Windows File Explorer to go into that folder and delete the files in there.

If you saved any BFB results, they are typically in C:\Spooky2\BFB_Frequencies.csv. If you delete this file, you will have eliminated all your custom programs from BFB scans.

If you created any presets based on your BFB scans, they are stored in C:\Spooky2\Preset Collections\User. You can either delete these presets in Spooky2 in the Presets tab or use the Windows File Explorer to delete the preset files.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1234751230020111/

Q8: Killing or healing? Which to choose?

A: Generally speaking, when deciding which types of frequency to run in the Spooky2 generator, you must understand what caused or triggered your health problem beforehand. First, look at the name of the program/preset and the description attached to it. If the program/preset has the word “disease” attached to it, it’s highly likely to be caused by a pathogen. With a pathogen-related program/preset, it is usually a good idea to run the frequencies in Killing Mode. Bacterial, viral, or other biological factors may also indicate the frequencies are more effective in Killing Mode.

Healing Mode would apply to almost everything else that is not targeting a pathogen in the Spooky2 database. For instance, detox is more of a body-cleaning process without eliminating pathogens or bacteria. When you run a detox program, the frequencies are removing toxins and assisting the natural detox system in your body. You are not eliminating a pathogen in the process. Therefore, a Healing Mode is more suitable in this case. Energy-balancing programs, such as Chakra and physical toning (i.e. Songs of the Spine), should also run in Healing Mode.

Programs related to autoimmune and inflammatory diseases are special cases because they usually require both the Killing and Healing Mode. If you’re not sure, you can use Universal Square H-Bomb which is suited for killing or Healing – If in doubt you can use this preset with confidence. It is not stronger, it is just universal shell preset.

Source: https://www.facebook.com/groups/spooky2/posts/2744032399091979/

Q9: Can I select Zero Tolerance for reverse lookup?

A: Zero tolerance may be too low. You might try a range between .0125 to .25. As the larger tolerance of this range is 20 times the size of the smaller tolerance, you may end up with 20 times the number of results using the larger tolerance.

For more details, please check the link:
https://www.spooky2.com/forums/viewtopic.php?f=115&t=14626&sid=c9d17668fa66920273b87a72dc4f9058

Q10: What should I do if there are no frequency matches showing in the Reverse Lookup?

A: Go to the Settings tab and reset to default. Then redo the reverse lookup.

Q11: How do you clean the digitizer plates?

A: 1. Alcohol is the choice to clean the plates.
Peroxide has too much water and too much water can ruin the plates.

2. 90% alcohol. Be sure not to touch the edge as the PCB (fiberglass) will soak up liquid and bloom (expand).

3. I’ve used aloe Vera hand sanitizers before since it was all I had. It worked I just made sure to use a little distilled water to wipe it off right after. Then dry.

4. I use wet wipes then alcohol.

5. You can use ozone / ozonated water to clean Spooky2 Sample Digitizer.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1245628582265709/

Q12: Can we scan with contact and run it with plasma?

A: Yes, we recommend using Plasma for running Scan Results if you have plasma.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1430645983763967/