Q1: How do you use the sample digitizer for the BFB Scan?

A: Here are the links for the instructions:

Spooky2 Sample Digitizer Instruction:
https://www.youtube.com/watch?v=LMZSuq43cn8&t=25s

How to Use Spooky2 Sample Digitizer:
https://www.youtube.com/watch?v=T4nzmA1glKU

Q2: If you have a defibrillator pacemaker, you cannot use contact mode, can you?

A: We do not suggest using it via contact mode; however, you can use the remote mode or scalar treatment.

Q3: Can I Run Grade Scan Results on GeneratorX Pro Standalone without a Computer?

A: Yes. You can run the scan results standalone, but you should load the programs from the computer first. You can load up to 30 programs into GeneratorX Pro, with a maximum of 200 frequencies per program. Refer to this page for more details.

Q4: Does one have to shut down the software each time to begin a BFB? What if you have a program running at the same time?

A: No need to shut down the software when you wish to do the BFB;

But pls remember, when doing BFB, pls do it solely and not with other programs at the same time. After you have done it, you will run the other programs.

Q5: Why only running killing on the BFB results? Why not healing or square H bomb?

A: GenX bfb results are for pathogens, parasites, bacteria, etc…. so they should be run in kill mode. The XM will pick up the lower frequencies easier and those can be run in heal or kill. Each of these settings is not far from each other so you can use dual, kill or heal.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/posts/2134440196717872/

Q6：What is the grade scan for?

A: Spooky Pulse gives you a unique way to rapidly evaluate pathogen program frequencies for effectiveness against your condition, allowing you to identify those that will be the most beneficial for you. This process is called Grade Program Scan. Note this doesn’t work with healing or detox programs.

When you identify which individual frequencies in a single program will work the best, and which ones won’t work so well, you can then eliminate the least effective ones from each program you grade, and create your own preset which will contain only frequencies which your body has confirmed will work well for you.

The Grade Scan tells you which frequencies produced the strongest biological response in your body. Each frequency is run, and the response is measured.

The grade number Spooky2gives each frequency is centered around 1. If a grade value is much above 1, it means the response was strong. If the score is much below 1, it tells us the response was weak. Thus, higher values indicate more effective frequencies. So, in the scan results below, the first (say top 10) are the most effective frequencies.

For how to do a grade scan, please check this link:
https://www.youtube.com/watch?v=h01BZkGElu4

Q7: Should I Run a Grade Scan or an Optimized Scan First?

A: It is recommended running the grade scan first and then optimizing the scan results. That way, you will have the most suitable frequencies and then optimize only those rather than optimizing many fewer effective frequencies before sorting.

Q8: What would you recommend to find the frequencies that would work for ALS?

A: Below are some ideas that shared by our users for your reference:
https://www.spooky2support.com/hc/en-us/articles/360039607773-Are-there-any-suggestions-for-Amyotrophic-lateral-sclerosis-ALS
https://www.spooky2support.com/hc/en-us/articles/4405420970651-Does-anyone-had-success-with-ALS-using-Spooky2

Q9: The reverse lookup is taking too long to analyze?

A: Check the settings. Too high tolerance (>0.05%) . The suggested range is 0.0125-0.05%. And selecting “Include  Harmonics” and “Include  Sub-Harmonics” which are both could be responsible for this.

Q10: Can l Do a Grade Scan Using Contact Mode and Run Scan Results Using PEMF Mode?

A: Yes. You can consider running the scan results as running a specific program. Spooky2 offers five modes for running programs(Contact, Remote, Cold Laser, PEMF, and Plasma mode), and any of them can be used to run scan results.

Q11：What is the difference between Grade Scan and Refine Scan?

A: 1. Grade Scan: it does a quick biofeedback using the frequencies of the programs you load and reorders them from strongest to weakest “hits” in how they affect your body. But it doesn’t tell you they’re true hits. If you do grade scan with an ovarian cancer program and you’re a man who obviously doesn’t have ovarian cancer, it’s still going to return those frequencies in some order. Garbage in, garbage out. It could potentially be useful if there were 10 programs for your condition in the database and you load all 10 into the shell and want to know the top 20 out of 300 that your body has a reaction to the strongest, because you want to work smarter not harder if that makes sense.

Q12: GenX Pro yields fewer frequency matches in reverse lookup compared to XM?

A: The primary reason GenX has fewer frequency matches in the reverse lookup compared to XM is due to its significantly higher frequency range.

Since the GenX scan covers a broader spectrum of frequencies, many of these higher frequencies are not yet included in our database. As a result, any frequencies within this expanded range that are not present in the database will not yield any matches, leading to a lower overall number of matches compared to XM.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/posts/2071083929720166/