A: Biofeedback scan requires a frequency sweep to be input to the body, plus a system to monitor the results of this. As this sweep is being transmitted, it will kill or injure pathogens. Your body registers these events as stresses, and each one is clearly recorded. It helps find the frequencies the body needs. After scan you save the scan result directly and then run the scan result by spooky2 to give your body a best needed treatment. You can find more details on understanding biofeedback scan from this link:
https://www.spooky2-mall.com/blog/understanding-biofeedback-scan/
A: It is not recommended for people having pacemakers to use Spooky2 Scalar. No electrical or electronic device is recommended to be used around someone with a pacemaker.
For more details, please check the link:
https://www.facebook.com/groups/spooky2scalar/permalink/309563869617178/
A: Let’s have a look at what our users said about it:
It’s Okay, you can place 2 boxes in the different level.
What you indicated you wish to do, is how mine is currently set up. Across the house, top floor to bottom floor. I did point the back of the lids towards the other corner of the house, but I did not bother to angle them to account for the elevation.
There are really no hard-fast rules. Do try to avoid metal, but you don’t have to go crazy trying to. My wire makes a hard right turn to go down the stairs, which has an iron railing. In fact, my wire runs past a lot of metal objects. I did not wrap my wire around them though. I did have a coil of wire when I first tested the configuration (didn’t cut the wire off the spool), and it still tuned. It tuned a lot easier once I trimmed the extra cable off.
For more details, please check this link:
https://www.facebook.com/groups/spooky2scalar/permalink/924410924799133/
A: First, you need to find two opposite corners of the space you want to cover. If your house is regular, such as a rectangle, either diagonal will work. However, when it is not regular, you should try to find the longest distance between the two ends of your house. Note that it would be easier to set up if there are few obstructions between the two selected corners.
Also, you should measure the distance between the two corners to find out the length required for the link cable. The wire is nothing special. It is a simple conductor, so any 14 or 16 AWG stranded wire terminated with standard 4 mm banana plugs will do.
And then you can set up your Scalar. Here is a blog that may give you some help: https://www.truescalar.com/how-to-set-up-spooky2-scalar-to-cover-the-whole-house/
For more details, please check this link:
https://www.facebook.com/groups/spooky2scalar/posts/1411787379394816
A: The metal bed would have a slight effect, but the scalar field can travel through metal and not be greatly affected. However, the link cable should be kept away from the metal, as regular EMF flows through this cable.
A: Scalar is also very good for cancer or parasites treatment: If you want to boost your immune system so that your body is better able to fight or rebuild itself, we would recommend you to choose Spooky2 Scalar. For people who like to use essential oil and herbs, Spooky2 Scalar is also a good choice since you could get the healing energy from those substances. If you are dealing with pathogen related health problems which require a lot of powerful killing, we would recommend you to choose Spooky2 Plasma. For more details, please go to this link to help make a decision: https://www.spooky2-mall.com/blog/how-to-choose-between-spooky2-plasma-and-spooky2-scalar/
Here are reviews from our users:
https://www.scalarreviews.com/?s=cancer
https://www.scalarreviews.com/?s=parasites
A: Spooky2 rife is rife machine that works on Royal Rife’s principles. Spooky2 gives you not one, but MANY Rife machines in one package – with plasma, contact, remote, PEMF, cold laser, and more.
Spooky2 Scalar is a Tesla device that transmits natural scalar energy rather than electromagnetic waves. A scalar field is created between the two boxes (Transmitter and Receiver) to restore your health.
No, please don’t use them at the same time. Plasma and Scalar are both very strong, so you may not be able to accept such a high level of efficacy output.
A: 1. They are based on different working theories. Spooky2 Scalar is a Tesla device that transmits natural scalar energy rather than electromagnetic waves. Spooky2 Plasma delivers frequencies to your body via powerful electromagnetic waves.
2. Rife scalar is less powerful than plasma. Scalar is less than 24 watts, whereas plasma can be more than 30 watts. Regarding effectiveness, I think Rife Plasma is more effective than Rife Scalar in killing pathogens, and scalar is better in healing, but this is my personal opinion only.
3. I have found Rife Plasma is stronger and works better and faster in both healing and killing pathogens than Rife Scalar.
4. Based on my own and some friends’ tests, pure scalar is quite good for healing. Here is how I normally use my Spooky2 scalar. Sitting in pure scalar field when I feel like to balance Yin/Yang in my body, or balance my charkras. Put supplements on the receiver coil for nutritional gains. Using it with Spooky2 generator to pathogenic cleanse. In this case, I get both healing, killing, and nutritions.
For more details, please check the link:
https://www.facebook.com/groups/spooky2scalar/permalink/464848114088752/
A: It is not recommended the share the field with pets if you are in the Scalar field. When the scalar field is shared, it can sometimes create symptomatic “cross-talk” between beings. This is why you shouldn’t share the field with someone who is very ill, as you may inadvertently share some of the “information” of their illness. In this regard, pets are kinda an unknown quantity.
Your energy has already been quantum entangled with family members and friends, so you can share the scalar field with them. We do not recommend sharing the scalar field with strangers, or people with serious diseases.
If you don’t want the scalar field to affect others, keep the two scalar units at a minimum distance. At times, it is impossible to avoid sharing the scalar field, but this is not necessarily a problem.
A: Yes, you can. Normally it’s suggested to run Scalar for at least 1 hour during the day. You can use pure scalar for overnight treatment. Your body will absorb the energy it needs. If you put drugs on the receiver box, please pay attention and see if you have any discomfort. If you don’t feel well, you can stop and give your body a rest.
Source: https://www.facebook.com/groups/spooky2scalar/posts/1584468095460076/
A: All frequency emission is a form of EMF.
Water will readily absorb any information. So you can’t say it imprints a frequency but not EMF. That is like saying you can smell the air, but not breathe.
3 minutes is all it takes, doesn’t matter if the frequency is low or high.
EMF by itself is not harmful. Certain qualities of EMF can be. Regarding 50 or 60 Hz, it is the constant entrainment of that frequency that makes AC lines harmful to the body. Cellular processes like to run around 30 Hz, and being around a constant 50/60 Hz source will entrain cells to operate above their norm — causing undo stress. It is akin to constantly running instead of taking the time to walk.
50 Hz and 60 Hz by themselves do not cause harm when used in a fashion that is not constant.
If it did you probably would want to sell your sub-woofers and stop listening to music.
A: As long as the essential oil has not expired, you can always use it without worrying.
For more details, please check this link:
https://www.facebook.com/groups/spooky2scalar/posts/1516787942228092/
A: Please check the link:
https://www.spooky2scalar.com/how-to-do-scalar-biofeedback-scan-using-spooky2-digitizer/
A: The scalar field balloons out between the transmitter and receiver. If the two are far apart, the signal becomes wider.