Q1: Can I run the DNA of two people on one remote on my GX Pro?

A: If you are running the same program, you can wrap the DNA samples of each person separately with stickers and put them together under Remote, and run them. But need to run is a different program, then each person needs to have their own generator and accessories.

For more details, please click this link:
https://www.facebook.com/groups/spooky2/posts/2037173473111212/

Q2: How do you know you’re not sending a frequency that can hurt something good in your body?

A: For answering the question, let us start with what does “Frequency” mean? 
It is the number of times a waveform pattern repeats every second. The units of measurement are in cycles per second (CPS) or Hertz (Hz), but the term Hertz is most commonly used today.

Then it will be much more clear and helpful if we do understand the frequency of human body:
In 1992, Bruce Tainio of Tainio Technology, an independent division of Eastern State University in Cheny, Washington, built the first frequency monitor in the world. Tainio has determined that the average frequency of the human body during the daytime is 62-68 [M]Hz. A healthy body frequency is 62-72 [M]Hz. When the frequency drops, the immune system is compromised. Check out these very interesting findings:

Human Body:
Genius Brain Frequency 80-82 MHz
Brain Frequency Range 72-90 MHz
Normal Brain Frequency 72 MHz
Human Body 62-78 MHz
Human Body: from Neck up 72-78 MHz
Human Body: from Neck down 60-68 MHz
Thyroid and Parathyroid glands are 62-68 MHz
Thymus Gland is 65-68 MHz
Heart is 67-70 MHz
Lungs are 58-65 MHz
Liver is 55-60 MHz
Pancreas is 60-80 MHz

Colds and Flu start at: 57-60 MHz
Disease starts at: 58 MHz
Candida overgrowth starts at: 55 MHz
Receptive to Epstein Barr at: 52 MHz
Receptive to Cancer at: 42 MHz
Death begins at: 25 MHz

For more details, please check the link:
http://www.spooky2.com/forums/viewtopic.php?f=12&t=6917

What is more, numerous of frequency can be found in the Spooky2 database, you can check the source below to find out the top 100 frequencies including Octaves at: 
http://www.spooky2.com/forums/viewtopic.php?f=12&t=6069

Q3: When I did the the reverse look up, I didn’t get any results.

A: 1. The database is the most comprehensive set of frequencies that I know of. There really is no guarantee that whatever is in the database is why any specific frequency came up in your results.

My suggestion is to not stress over why each frequency came up and just run the frequencies as they are returned and enjoy feeling better.

For more details, please check:
https://www.facebook.com/groups/spooky2/permalink/957487141079856/

2. It just means that the frequency is not discovered yet, what that exact frequency is. As long as it shows up in the biofeedback it means there is something unbalanced. I would follow the routine. The look-up is not important at all. I don’t even check mine most of the time.

3. For reverse lookup, only those hits a match in the Main database are reported. As the database is incomplete so the frequency you found may not in the database now. You can try to change settings like % Tolerance and include Octaves.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1324467534381813/

4. The scan result list is your frequency set to run. Sure you can do what you are suggesting if you want, but the scan will target the frequencies that you need. no real need to do a reverse lookup. If you have already been diagnosed with something in your history and the name of that thing turns up in your scan then maybe there is a justification to run that a few times.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1407957062699526/

 Q4: How can I test the unit properly?

A: Here are the exact steps you can follow to verify your Spooky2 generator works OK.

Testing the generator by itself.

Test the XM as a standalone generator using these settings:

CH1 F=00′ 000′ 000.10 Hz AMPL = 20.00V OFFSET = 000% DUTY = 50% P = 000%
CH1 Sync Tracemode: Yes
CH2 F=00′ 000′ 000.10 Hz AMPL = 20.00V OFFSET = 000% DUTY = 50% P = 180%
CH2 Sync Tracemode: F.A.D. (This tells CH2 to follow the frequency, amplitude and duty cycle of CH1.

Connect the Spooky Boost cable.

Here are four ways to test the generator:

1.If you have a Digital Multimeter, you can set it on the 20 volts DC scale and connect it to the ends of a TENS cable. You’ll see the voltage go to +9.8 volts for 5 seconds, then switch to -9.8 volts for 5 seconds. If you see that, the generator is working correctly.

2.If you have a Spooky Remote, you can connect it to the output of the Spooky Boost cable. The LEDs should light up alternately every 10 seconds. If that happens, the generator is working correctly.

3.If you have the TENS cable and TENS pads, you can turn the CH1 amplitude down to zero, and apply a pad to the inside of each ankle using the red and black connectors. When you’re ready, turn the CH1 amplitude up gradually until you feel a sensation. 8 to 12 volts should be enough but 20 volts was not unbearable. If you feel the tingle, the generator is working correctly.

4.If you still have any doubts, get an AM radio and tune it to an unused channel. Tune the CH1 frequency to around the same frequency and verify that you hear the output of the generator on the AM radio. As you change the frequency of the generator, you might hear various tones, squeals, racket or sudden silence which indicates the generator is working correctly.

Once you’re confident that the generator is working correctly, it’s time to test the communication between the computer and the generator. Leave the generator connected to its power supply and turned On.

Connecting the USB cable

To dissipate any static electricity, touch the metal case of your computer with one hand and the metal case of your generator with the other hand. If you get a slight jolt, be thankful you took the shock and not your expensive gear. Now, touch the metal end of the USB cable with one hand and touch your computer case with the other. The computer, generator and USB cable are all at the same potential now, so it’s safe to connect the USB cable to the generator and then to the computer.

The USB cable supplies the data connection between the Spooky2 program and the XM generator. The USB connection cannot supply sufficient power to fully power the generator, so the generator power supply should always be connected to the mains supply and connected to the generator when it is in use.

Testing with Spooky2 software.

Start up the Spooky2 program.

If the program displays “No generators were detected. Entering Test Mode” you should double-check the USB cable. Substitute a different cable if you have one. It the same kind of cable that most printers use, so you can temporarily borrow one to verify whether the cable is good. If you replace the cable, close the Spooky2 program and open it again.

There are also possible issues with the driver installation. See the Utils menu and the User Guide to remedy any driver problems.

Finally, you can try to use the program.

Choose a program in Spooky2 by double-clicking on it in the database list to load it. Any one will do for testing.

Click the red Channel button just right of center (Channel 3 on my computer). You’ll see the Channel Control 3 window with a list of frequencies. Click Start. It may take a few seconds for the waveforms to be created and transferred to the generator. You may hear a relay click in the generator. Those are good signs. Now compare the frequencies on the generator’s LCD display with the frequencies in Spooky2’s list. If the frequencies match, then, hooray, your entire system is working correctly!

Q5: Is it ok to run the terrain on several people even if they have various health conditions, as long as they are feeling ok with it?

A: The Terrain Protocol prepares the terrain in your body to be more available or receptive to further Rife treatments. People often refer to “The Terrain Protocol” as if there was only one. There are actually three, Terrain – (R) BY,  Terrain-Mercury – (R) BY, and Terrain-Nonviolent – (R) BY. Each designed to help people in need.

The difference among them are listed below:
Terrain – (R) BY

This preset runs for 11 days and then repeats itself.

It is a hard-hitter, which covers pretty much everything. If you want to experience a full detox and don’t have deficiency in detoxification organs, choose this one. Some people may experience a herx from this protocol, especially if they have a high viral load, or their health is compromised in some way.

Terrain-Mercury – (R) BY

This preset runs for 11 days and then repeats itself.

It is a variant of the Terrain protocol, minus the mercury frequencies. This is useful for people who have mercury amalgam fillings and do not want to experience a mercury detox. If you are relatively healthy but have metal fillings, this would be the protocol to choose.

Terrain-Nonviolent – (R) BY

This preset runs for 10 days and then repeats itself.

It is very gentle, just like the Terrain Protocol, but without all the presets that kill parasites. Instead, the focus is on healing and rejuvenation. If you are unwell and want to improve the function of your detoxification organs, this would be the protocol of choice. Also, if you have Candida overgrowth(which is common in Lyme), use this preset. The first two Terrain protocols may release toxins too quickly for you.

Notes:

These three presets can run standalone, or in conjunction with presets in ‘>Plasma’, ‘>Contact’, ‘>Coil’, ‘>Laser’ or ‘Scalar’. Go to Presets tab, click >Detox>GUIDE Terrain Protocol – Click Me.pdf for a schedule to run these presets.

When running these presets, make sure you keep yourself well hydrated to aid the elimination of toxins from your body.

Supplemental molybdenum would also help if you have Candida overgrowth and don’t feel well during Terrain.

The advice we always give is to “listen to your body”. If you start feeling lousy, stop the treatment, and give yourself a break. This applies to any type of treatments, not just Rife. Our bodies are not machines, and everybody is different.

Q6: Can you run multiple programs on one generator?

A: Each Generator should have only one mode running at a time. (There are exceptions, but they are techy and more appropriate to forum discussions.) The GeneratorX has two generators within the one casing – G1 and G2. For example, If you’re running Terrain on G1, you would run your contact sessions (or other remote sessions) on G2.

However, The XM only can run 1 mode at one time.

Q7: Can the MW frequencies be run on the XM Generator or are they GenX Pro only?

A: Either generator is workable. The MW frequency programs are just frequencies like everything else. You can use your favorite or most effective shell preset to run them.
If in doubt, start with the Healing (x) – JW presets or try the Golden Ratio (x) – JW preset — where X = the method of delivery. 

When applying, pay attention to the duration and delivery method to run MW frequency.

The duration will probably vary greatly depending on individual size, sensitivity, need and etc. At the beginning, I suggest using with very careful monitoring of symptoms or other tests to verify benefit, and increase until benefits are seen, but not to the point of overdose or negative symptoms.

The best delivery method for the MW frequencies is the one you want to use.
The delivery method is not critical if you run MW nutritional programs like mineral, essential oil, etc. Because they are natural, and your body can expel any excess.

However, if you run MW drugs frequencies, we recommend you to keep the duration as short as possible.

Pharmaceutical drugs are man-made chemicals which are unknown in nature. This allows them to be patented. While many believe that using drugs’ frequencies rather than their physical substance allows beneficial effects without nasty side effects, we know of no research that shows this to be true.

You should therefore exercise EXTREME CAUTION when experimenting with these frequencies, and in no case should a drug program ever be set to run non-stop remotely. Drug frequencies are most safely used in Contact or Plasma Mode because these modes’ effectiveness is more immediate, so any concomitant side effects will become apparent much quicker, allowing experimenters to make a more informed choice, and either stop or tailor their safe use.

Q8: How do l save or delete a program l have created?

A: Spooky2 saves custom programs/frequency sets in C:\Spooky2\custom.csv, while biofeedback programs/frequency sets are saved in C:\Spooky2\BFB_Frequencies.csv. For the presets you create, Spooky save them in C:\Spooky2\Preset Collections\User\.

If you save some frequencies via “Create Program”, or via a biofeedback scan, these results are automatically included when you search for a program in the Programs tab. Please refresh the database, then check at the bottom of the list of frequencies in the database (after Zygomycosis), it should be among your custom frequencies.

For deleting certain programs, you can

1.Go to the software, then choose database – Edit Custom database #1. Then you will see all your own programs and you can edit or delete them.

2.Go into the file explorer on your computer, then the spooky2 folder, then have a look at Data folder and Scandata folders. Also preset collections, then user folder. You can see files with the dates on and can delete them from there. Be careful not to delete anything that Spooky2 has put in. I have found that to delete completely and to get the files to disappear, I have to shut down Spooky2 and restart it. I’m no expert, so just giving my personal experience, so be very careful not to mess with other files.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/posts/2289112904583933/

Q9:When running contact programs should you pause all the generators running remote on the same person?

A: No, you do not need to. We can apply them together at the same person at a time.

Q10: On the Control, I see “Analyze” & “Analyze+” buttons at the bottom right. What is the difference between them? How can we use the Analyze buttons?

A: 1. There is a box on the left of that box that you can select for angle+ current. It seems to give more hits per scan.

2. You will find that angle+ current has both the ability to pull duplicate frequencies from the other two analysis methods, but also has the ability to pull frequencies that are unique – pulling frequencies that responded well in both categories but not necessarily enough to make the top 10 using the other two methods of analysis.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1167344406760794/

In summary, click Analyze button and select latest BFB scan file. Analyze+ will display up to 20 hits, Analyze 10 hits.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1182484878580080/

Q11:What can I do with Gen X if I don’t have the booster piece? I have only the remotes

A: You can get some benefits though connecting straight to the OUT1 or OUT2 and some programs require it. But to get the most out of the session you normally need the spooky2 boost. Some peripherals work best if you attach them straight to the output (such as contact on the silver generator, the GeneratorX scan and run or hunt and kill programs, but that’s not on all programs), it does depend on what you want to use your generator for and how effective you want it to be really.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1523406694487895/

Q12: How to set up GenX programs to run stand-alone?

A: GeneratorX can be run in standalone mode, which means you can run desired programs without connecting to a computer. Follow the link below to load programs into GeneratorX:

How to Load Programs into GeneratorX?
https://www.spooky2-mall.com/blog/how-to-load-programs-into-generatorx/

Note: here are some restrictions or limitations of running GeneratorX stand-alone.
Each program is limited to 200 frequencies, each using the same waveform, amplitude, offset and duration (dwell).

The Out 2 signal will be the inverse of Out 1. You cannot use Out 2 for modulation for Spooky Central or Spooky Plasma. However, special presets are available which allow these machines to run connecting only Out 1 at the Input.

Frequencies are fixed, with no sweeps. If a program containing a sweep is loaded, only the start frequency is used.