Q1: How long to run BFB results?

A: Depending on your Spooky2 device, scanning every seven or four days is highly recommended.

Spooky2 Central/Plasma users should use the results program in a killing preset and run it once a day for four days, then scan again.

Contact Mode users should run it once daily for seven days, and then scan again.

Remote Mode should be run non-stop for a week and then scan again. Repeated scans are necessary. 

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1338080256353874/

Q2: Can my wife and I both be between in the scalar wave at the same time?

A: Let’s look at what our users said:

1. People who live in harmony often share a common subtle energy field (aura). Then physical issues are also shared. This is called quantum entanglement. So I think sharing a scalar field is a good thing in this case, if it’s purely scalar. Molecule I don’t really know what the impact would be if you didn’t need treatment frequency. Suspect your biofield to read and reject the unwanted. But this is just my guess.

2. From what I understand, the body only accepts and rejects what it needs. The scalar field will reconstruct the cell growth to where it should be. Its essence is not to transfer “disease”, but to correct damaged cells and kill pathogens. The field I understand will sort out and heal the individual within the scalar field. So sharing fields shouldn’t be a problem.

I have Spooky2 Scalar devices running throughout the house. I do not (and cannot) feel or get my wife’s symptoms because of the scalar fields acting on one’s own DNA.

A bit like fingerprint recognition, it’s not transferable. As far as I know and have researched, it is fairly safe for more than one person to be in a scalar field, and individual healing will occur.

If someone other than yourself is deemed to be in a clinical situation (and charged a fee), the agreement is to provide that person with what they ask for. Individualized treatment.

One of the main reasons I purchased the Spooky2 Scalar was to be able to maintain independence and freedom of movement while being treated. I also run it 24/7.
This may not be for everyone, but this is how I operate.

3. I will not share scalar fields with strangers. But if it’s a family, I can accept that because our energies are already intertwined. When the person has a serious illness, it is best not to share premises, even among the same family.

For more details please check the link:
https://www.facebook.com/groups/spooky2scalar/permalink/405336736706557/

Q3: Do you like blood or saliva for sample digitizer scans?

A: You can analyze mucous from a cough and see what pathogens are present. If a tissue sample is not possible, you can place the TENS pads directly across the problem area.

For more details, please check the link:
https://www.spooky2-mall.com/blog/gx-sample-digitizer-instruction/

Q4: Can I use a scalar digitizer for the biofeedback and then treat with a remote or do I have to treat in the scalar field?

A: Yes, you can run these results anywhere. One thing though, the Scalar only scans up to 50 kHz. For this reason, you might be better off doing a TENS pad scan.

However, there are cases where a TENS pad scan can’t be done, say like you are trying to scan for a brain parasite or you are trying to scan a pet with fur. In these cases where TENS won’t work, then Scalar is an excellent option.

On the other hand, John has said in the past that Scalar scan had amazing reverse lookup hits that matched known issues.

For more details, please check the link:
https://www.spooky2.com/forums/viewtopic.php?f=117&t=14533&sid=f16596b03a77fad43c2bc7629d5182da

Q5: How do I run a baseline scan?

A: Just stick the pads on your body, run the Baseline scan, then leaving the pads where they are, run a normal BFB.
Note: Do NOT stick the pads together or use different pads, as some people have suggested in the past. This makes no sense whatsoever.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1637933339701896/

Q6: Please explain what threshold is again. How is threshold calculated?

A: It varies, but given the version you cited.

If you measurement for current is say 650, then 651, then 649, then 700 mA across 4 frequencies, the running average up to the 700 would be 650 mA. 700 would be a change of 50 mA.

700 / 650 * 100 = 107.69, which I believe is reported as a hit of 7.69 which is way over any threshold one may specify (big hit). Increase of 7.69%

A threshold value of .2 would eliminate all the data that falls below this, meaning it would have had to increase by .2 % (given the version you cited).

I’m not 100% sure this is it, would have to run some numbers to verify, but not in a position to do so as my gear is back at home and I’m in Alt. GA

If you were using peak, instead of running average, then the raw data is used.

650, 650.18, 650.5 for 3 measurements. 2nd frequency would not make the cut having a change of only .18 (below .2), but the 3rd frequency would having a change of .32.

For more details, please check the link:
https://www.spooky2.com/forums/viewtopic.php?f=5&t=9645

Q7: What should the start and finish frequencies be when doing a biofeedback scan?

A: Look for the listed start and finish frequencies in your biofeedbackscan panel on the Control screen. For instance, start frequency is 41000 Hz, finish frequency is 50000 Hz.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/posts/2164404123721479/

Q8: Are the scalar cables OK on a concrete floor with steel in the concrete? What about metal in the bed, does that affect it?

A: The metal bed would have a slight effect, but the scalar field can travel through metal and not be greatly affected. However, the link cable should be kept away from the metal, as regular EMF flows through this cable.

Q9: When we hunt and kill, especially if we do it a lot, will we be weakening our immune system, which does need to be used in order to stay strong?

A: The issue is that if you have a chronic disease, the immune system can’t deal with it at all. So you have to reduce the pathogens to help the immune system to function and deal with the rest of your issues. I can understand your concern that the immune system isn’t being trained up to fight the pathogens, but, when you kill pathogens that aren’t the weakening of the immune system is it? The immune system isn’t being affected. But you can’t let someone get sicker and sicker and not attack their pathogens somehow can you now? On top of that, we have frequency sets that are there to help boost immunity. It’s more a question of outsourcing an aspect of the defensive function to the frequency generators so that the rest of the immune system can help fight the rest of the issue. The sicker you get the more the immune system gets compromised and finds it hard to fight the new invaders. So what you are doing is freeing up the immune system through reducing parasite and pathogen load. Once the load is lessened, then you can get to work on other things.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1414829525345613/

Q10: How can I delete a BFB that I saved, but it went into the Spooky database, and not into my computer.

A: 1. You can go to the software, then choose database – Edit Custom database #1. Then you will see all your own programs and you can edit or delete them.

2. Go into the file explorer on your computer, then the spooky2 folder, then have a look at Data folder and Scandata folders. Also preset collections, then user folder. You can see files with the dates on and can delete them from there. Be careful not to delete anything that Spooky2 has put in. I have found that to delete completely and to get the files to disappear, I have to shut down Spooky2 and restart it. I’m no expert, so just giving my personal experience, so be very careful not to mess with other files.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/posts/2289112904583933/

Q11: Can we do environmental work like killing pests with the scalar, if we have set up in the entire house?

A: yes, you can.

First, you need to find two opposite corners of the space you want to cover. If your house is regular, such as a rectangle, either diagonal will work. However, when it is not regular, you should try to find the longest distance between the two ends of your house. Note that it would be easier to set up if there are few obstructions between the two selected corners.

Also, you should measure the distance between the two corners to find out the length required for the link cable. The wire is nothing special. It is a simple conductor, so any 14 or 16 AWG stranded wire terminated with standard 4 mm banana plugs will do.

And then you can set up your Scalar. Here is a blog that may give you some help: https://www.truescalar.com/how-to-set-up-spooky2-scalar-to-cover-the-whole-house/

For more details, please check this link:
https://www.facebook.com/groups/spooky2scalar/posts/1411787379394816

Q12: What does it mean if you get essential oils on scan results?

A: 1. Generally, biofeedback scan only can tell you which frequency for treatment. It can’t tell you what the frequency means. When you do reverse lookup, the result has an essential oil or nutritional product. It means an essential oil or nutritional product includes the frequency too. There is no other meaning.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1359432577551975/

2. We use essential oils, I found that if I did a scan after applying oils on another family member that sometimes they show up in the scan, I just assumed my body had an overdose of them at the time. If your body doesn’t need essential oil it just does away with it on its own. So it is not really a concern.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1409220515906514/

Q13: Can you run GX BFB scans on a XM?

A: You can run the GX scan results on an XM generator. The frequencies above 5 MHz will not reproduce properly unless you choose a shell Preset where the X column is 1 for the chosen waveform initially, and you manually change it to 5… With this simple change, all will work fine.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1786911821470713/