Q&A of Debbie Rich Spooky2 FAQs Training Courses

Q1: Have you had any power/noise issues or other devices with Spooky2 Central?  

A: 1. Whenever a frequency in the audible range is run (20 – 20,000 Hz), you will hear the Spooky Central making a sound that matches that frequency. If you run high-frequency sets, you won’t hear any pitches coming from the Central. By the way, the biofeedback frequencies start at 41,000 Hz, well above the 20,000 Hz audible range.

2. Generally, if the running frequency during your hearing range, you will hear sound from the plasma tube and ultrasonic too. You could try to wear earplug during sleep or run spooky2 central/plasma during the day. And you can try far-field of plasma tube to reduce the sound.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1326742837487616/

Q2: Do you need a Spooky2 Central to run plasma? or can you do it with GenX pro?

A:Yes, you need Spooky2 Central to run plasma.

1.You MUST have a Central or Plasma unit to connect the plasma bulb to, as the unit connects between the generator and the bulb to amplify the signal from the generator to power the bulb.
The whole system is computer, generator, Central or Plasma, bulb. Of course, there are power and signal connections as well.

2.GeneratorXPro can’t run plasma tube directly; you need Spooky2 central or plasma unit too.

Q3: What is expected lifespan of plasma tubes?

A: Not sure the exact hours, but should be at least 10,000 hours. 

Generally, you can use it for several years.

Q4: Can you use Spooky Central and scalar at the same time?

A: No, you can run some Rife products and Scalar at the same time, except Plasma. Plasma and Scalar are both very strong, so you may not be able to accept such a high level of efficacy output.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/posts/2173420576153167/

Q5: Is it safe for me to put the phanotron against my neck?

A: Yes. The plasma is safe for the head, including a head with cancer.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/posts/2170569003104991/

Q6: Should EMF-reducing jewelry (bracelet, necklace) be removed when running Spooky2 frequency treatment?

A: 1. Jewelry is not ferromagnetic. Therefore, it does not affect EMF but can affect your aura negatively when wearing it in public. Better run DH preset 0006- Protection of Aura & Light Body, 0003- Remove negative energies, and 0004 – Aura clear energetic body once, or twice a month, from low to high numbers, as follow instructions in Notes to take effect.

2.Let’s look at what our users said:

I am trained in an advanced form of muscle testing, and we check to see if any jewelry or electronic devices are blocking the client from healing. The response varies and is very individualized. For example, a popular wrist device associated with a piece of fruit will be fine for one person and not the next. If someone is blocked or switched from an item, we will get inaccurate results. I have also observed this doing EAV. It would probably be best to remove everything while scanning to be safe.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/posts/2237229376438953/

Q7: What to do if Plasma tube does not light up? Does the device still work even if the neon doesn’t light up?

A: There can be many reasons why the tube does not light. You can eliminate many of the reasons by first checking the ultrasonic transmitter. Choose the “JW- Spooky Central Overnight Sweep Low Frequency” Preset and run it, with the front panel selector switch on Spooky2 Central set to “Slow”. If you can hear the ultrasonic transmitter, then most likely something is wrong with either the tube connections or the tube.

If you can’t hear a tone from the ultrasonic transmitter, please do the following steps to troubleshoot:
https://www.spooky2support.com/hc/en-us/articles/217304117-What-to-do-if-Plasma-tube-does-not-light-up-

Q8: Hi appreciate it if you could explain: how to run any programs for only 4 hours for each treatment?  How long do we run each treatment?

A: Maybe you are confusing a chain, with a program sequence when run via remote. The guideline is that the remote program sequence should repeat within 4 hours at the MOST because pathogens may recover in that time frame, so all benefits from running the frequency that did damage would be lost. It’s much more effective to limit the sequence to 2 hours so the repeats happen faster. But there is no limit of a chain of programs.

Most programs can be run 24 / 7. There are many instruction manuals available from here: 
http://www.spooky2.com/downloadsPage/index.html

Q9: It would be helpful to see how these unit are actually laid out in a room. Can you show this?

A: Here is the video about how to set up the hardware of Central, you can click to know more:https://www.youtube.com/watch?v=27lEjvmrNWA

If you want to use the central for a whole night’s treatment, you can check the blog:
https://www.spooky2-mall.com/blog/how-can-i-use-spooky-plasma-tube-overnight/

Q10: Does TV and/or wi-fi affect the benefits of phanotron tube?

A: Let’s look at what our users said:

Wi-fi: I only use this for Skype sessions now. I have my networked computers connected using Ethernet cables. Electrically, wi-fi doesn’t interfere with any transmission mode. However, the frequencies chosen by the regulatory “authorities” are now known to be deleterious to health.

TV: Electrically, this doesn’t interfere with either Contact or Remote Mode. However, Plasma Mode will disrupt its reception, usually making it unwatchable, but the TV won’t affect Spooky Central.

PC: Doesn’t interfere with Contact or Remote. Plasma may affect its operation, but the PC won’t affect plasma.

Cell phones: even when they’re turned off, these emit a powerful microwave signal burst looking for the nearest tower every 15 seconds. The idea is that you will have instant connectivity when you turn the phone back on. The only way to stop this is to remove the battery. Although they don’t affect Spooky equipment, our advice is to remove them from the room. I no longer use my iPhone.

For more details, please check the link:
http://www.spooky2.com/forums/viewtopic.php?f=9&t=6499

Q11: Is there a difference between using PEMF on Central, vs. just using it on XM/GenXpro?

A: There’s only one Spooky2 PEMF coil. The PEMF coil used with spooky2 generator to run Spooky2 PEMF mode and the PEMF coil connected to central unit are the same PEMF coil. PEMF coil can be connected to the high-power port of a boost to run PEMF mode with a generator directly. But an adapter is needed to connect PEMF coil to central unit.

The PEMF coil for spooky central is for cellular electroporation. This makes the cells more susceptible to the plasma treatment. It’s a fixed 100 Hz signal. The PEMF for the generator, does a broad spectrum of treatments.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/posts/2281154452046445/

Q12: Are electric gloves contact method worth getting or what is the best contact method?

A: There are four ways to run Contact Mode: Spooky2 Tens Pad, Spooky2 Tens Contact Kit, Spooky2 Stainless Hand Cylinders, Spooky2 Tens Internal Electrode. Each of them has their own advantages.

For example, tens pads are ideal for long treatments. Holding metal tubes can get tiresome after a while! Hand cylinders can be used for foot bath:
https://www.spooky2-mall.com/blog/how-to-do-foot-bath-using-spooky2-hand-cylinders/

The contact kit can be used for ankles and wrists. And the Spooky Tens Internal Electrode provides a safe, convenient, and hygienic way to treat the anal canal area, or nearby organs, such as the bladder, prostate and uterus.

Q13: Can people with pacemakers and metal vascular clips use Spooky2 Central?

A: Most vascular clips are OK for use with MRI scanners that are much more powerful than Spooky2 Central’s coil output since they are made from metals or materials that are not magnetic. Some clips are made from ferrous materials. If you have these then our advice is to avoid MRI scans and PEMF use unless instructed to do so by a trained and registered medical professional.

Q14: Still important to have Central, generator and computer plugged into different electrical outlets?

A: It is better to plug Central into another power source. If not, you may see more generator errors than necessary.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/posts/2207855956042962/

Q15: How does one sleep with the Phanotron tube?

A: 1. Various means…
– Put the bulb in an adjacent room so there is a wall between but the bulb is still very close.
– Put the bulb below the top of the bed at the side and sleep with back to it.

2.My plasma tube is placed on a chair, right next to my side of the bed. Earplugs in and turning over to the other side. Everything is OK. You get used to it.

For more details, please check the link from:
https://www.facebook.com/groups/spooky2/permalink/735522243276348/