Q1: What type of program would you recommend for pre-diabetic? Have anyone had any success with diabetes?
A: Let’s check our user’s success on diabetes：

1. I have been PreDiabetic for some time. When I was sick in October and had to go to the hospital for pneumonia, they gave me steroids, which elevated my blood sugar to dangerous levels. It took me weeks to get over the cause of the pneumonia, then because I had a weakened immune state, I got bronchitis and then mycoplasma (related to my Lyme) . My blood sugars have remained high, and I try to manage on my own rather than take medications. I use a scanner to monitor blood sugar. I thought I was losing this battle and would have to resort to medications. Well tonight I put on the program “Diabetes Hyperglycemia Symptoms” and my blood sugar went to normal without meds!! I am beyond ecstatic! I used the program on remote. If I had any doubts about Quantum Entanglement I am convinced now!!
   
   
2. Thanks for sending me my Spooky2 starter set. I’ve mostly been putting it to good use to combat my starting pre-diabetes. After a couple of days of use (JW killing remote, diabetes 2 (CAFL) preset) my glucose levels have returned to normal again. It’s now possible for me to eat everything I like without seeing those dreaded elevated glucose levels!

As soon as I have the funds I’ll buy some more generators so I can start helping some of my family members. I’m really thrilled by the effectiveness of Spooky2!

Thank you for making such a great tool so readily available!

More reviews here: https://www.spooky2reviews.com/page/2/?s=diabetes

Q2: What is the meaning of ETDF,CAFL in the program?

A: The most important part of any Rife frequency therapy is using the right frequency in a form that is clean enough and accurate enough to be effective. In this article, the various sources for frequencies are discussed.

Most people were wondering what CAFL, KHZ or BIO refers to? They are the names of the various sources for frequencies.

For more details, please check the link:
http://www.spooky2-mall.com/blog/rife-frequency-sources/

Q3: My husband has been chewing nicotine gum forever, seriously years. I am an educated spooky user, I use Spooky 24/7 3 generators for myself for Lyme  Please tell me what I can do to help him. Which preset can you use to eliminate nicotine from the body?

A: 1. Once you stop it only takes 3 or 4 days for it to eliminate from the body. Cotinine is something your body makes after nicotine enters it… takes 1-10 days to eliminate. Neither will show up in a urine sample after 4 days of secession.

2. You can try the Terrain protocol or detox maintenance.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1540455422783022/

Q4: I should start as a type 2 with a grade scan? what is that more specific and how do I run that…like XM or genX?

A: Besides the regular biofeedback scan, Spooky2 also allows you to perform a grade scan, which contains settings to test any database or third-party program for effectiveness against your condition. Once you identify which frequencies in multiple programs will work the best, you can run only these frequencies for better therapeutic effects. Let’s look at how to do a grade scan in this blog.

Both XM Generator and GeneratorX/GeneratorX Pro are capable of performing a grade scan. We will take GeneratorX Pro as an example.

For more details, please check the link:
https://www.spooky2-mall.com/blog/how-to-do-a-grade-scan/

Q5: What do you feel are the main requirements for the computer that you use for spooky2? Memory/ etc?

A: When it comes to running the Spooky2 software, the hardware requirements are quite minimal. In fact, any computer or laptop that can run the operating system can run Spooky2.

However, if you want to experience the full potential of Spooky2 Rife, a more powerful machine is recommended. This is because a faster processor and more RAM will allow the software to process the growing database more quickly, resulting in faster search times and smoother performance.

For more details, please check the link:
https://www.spooky2-mall.com/blog/what-kind-of-laptop-and-computer-do-i-need-to-run-spooky2/

Q6: Can we use Spooky2 for ADHD? Which equipment is best for ADHD, allergies and an autism?

A: Let’s see what our users said about it:

1. My daughter had same issues 4 years ago and has made remarkable recovery I started with 4 generators and then got central and plasma download software and take a look need pc to have dedicated to your set I bought refurbished ones 175.
2. Probiotics/kefir known help a lot with autism as anxiety. Anxiety is a lot to do with your gut. Your brain also with stress will slow blood too your gut. That’s why and the saying goes. Go with your gut feeling.
3. Scalar! I put homeopathic therapies on the plate and have better success with allergies with that then the GX. However with detox, especially heavy metals, the Generators are faster with that. But you can put substances that help with detoxing on the scalar plate too. So far the scalar has been healing my adrenal function faster than anything else I’ve worked with in all these years!
4. IMHO, it’s hard to say what you don’t need, but it’s easier to say what can be useful. Healing is a process and there may be different times in the treatment regime when different quantities and qualities of equipment can be used to help the problem. It has to be specific to the individual. You can start with just one essentials kits, then expand that to cover more remote work with a few XM generators and then see whether you want to go nuclear (LOL) and use central or plasma. The thing is, you don’t have to buy everything that you think you need all in one go. That’s a beauty of the Spooky2 system.
5. I usually run a cocktail of frequencies on the remote. You can search “concentration”, I’ve found them useful.
6. Gut health plays a huge role for ADHD. Clean the gut with Spooky2 and build up the gut flora with prebiotics.
7. Try the “Attention Deficit Disorder with Hyperactivity” program.
8. Hypothetically I would experiment with vitamin and mineral frequency sets as well as the DH experimental resets and the Bach Flower Remedy presets. I would also run terrain on remote many times over.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1463656910462874/

Q7: Do you sleep in the same bed with your wife while running the scalar that is running specifically for yourself?

A: Some say yes, some say no. The jury is still out on this one.

1. People who get along well tend to have a shared subtle energy field (aura). Then physical issues are shared as well. This is called quantum entanglement. So I think sharing a scalar field in this case is a good thing if it is pure scalar. Molecular I don’t really know what the effect would be if you don’t need the healing frequency. Suspect your biofield would read and reject what is not needed. But that’s just my guess.
2. From what I understand the body will only accept and reject what it needs. The scalar field will rebuild cell growth to where it should be. It’s nature is not to transfer “disease” but to correct damaged cells and kill pathogens. The field I understand will sort out and heal the individual that is in the scalar field. So sharing fields should not be a problem.

I have Spooky2 Scalar devices running throughout the house. I do not (and cannot) feel or acquire the symptoms my wife has because the Scalar field acts on an individual’s own DNA.

Kind of like fingerprinting, non-transferable. From what I have heard and researched, it is fairly safe for more than one person to be in a scalar field, and personal healing will occur.

If someone other than yourself is considered for the clinical situation (and charged for), the agreement states that you provide that person with what they request. Individualized treatment.

One of the main reasons I bought the Spooky2 Scalar was to be able to maintain my independence and freedom of movement while I was in treatment. I also run it 24/7.

This may not be for everyone, but this is how I operate it.

3. I will not share the scalar field with strangers. But if it is family, I can accept it because our energies are already entangled. When the person has a serious disease, it is better not to share the field even for family.

For more details, please check the link:
https://www.facebook.com/groups/spooky2scalar/permalink/405336736706557/

Q8: Can I run different programs at a time on GeneratorXPro?

A: Each Generator should have only one mode running at a time. (There are exceptions, but they are techy and more appropriate to forum discussions.) The GeneratorXPro has two generators within the one casing – G1 and G2 – so as Pamela has explained above, if you’re running Terrain on G1, you would run your contact sessions (or other remote sessions) on G2.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1612536955574868/

Q9: How long do you sit in the scalar with the medication on it?

A: Normally it’s suggested to run Scalar for at least 1 hour during the day. If you put drugs on the receiver box, please pay attention and see if you have any discomfort. Drugs may have side effects and different people may have different reactions. For natural supplements, like essential oils and vitamins, there’s no limit to that. And you can use pure scalar for overnight treatment.

For more details, please check this link:
https://www.facebook.com/groups/spooky2scalar/posts/1221890981717791/

Q10: What’s the difference between “Hunt & Kill” and “Scan & Run”?What is the difference between a regular scan and a grade scan? Why would we want to do grade scan?

A: 1. Scan and Run: scan, run, scan, run…

Hunt and Kill: scan, run, refine, run, refine, run…

2.The Scan & Run preset starts with a BFB scan, then runs the scan results automatically on an allocated generator. After the program of scan results completes, another full biofeedback scan commences. This cycle repeats until the preset is stopped, or no hits are detected, indicating the pathogens in your body have been removed.

Hunt&Kill preset begins with a short biofeedback scan. The hits are then run on an allocated generator. In the subsequent scan/run cycles, the previous hits are re-analyzed. Pathogens which are mutated are found and hit again. It does not matter how far the pathogens run. They will be found. And they will become targets. This preset keeps refining the first scan results and runs automatically until it is manually stopped or no hits are detected.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1272366449591922/

3.They seem to pick up different things when you run them. I do my H+C all night. It latches on to some things and then goes at them again and again until there is death. The scan and run will be different as it might pick up more things but won’t necessarily kill all but will reduce numbers. So I guess it’s about whether you have lots of things that need generally reducing or a few things that need shaking to death.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1536784583150106/

A grade scan is when you want to find out what frequencies are best for a specific person when there are too many to run at once. Of course, one needs to know what pathogen they are fighting to choose programs to begin with.

With the GX scan that works in 6 or so minutes, the Grade Program scan is much less important, in my opinion, but not everyone has that generator.

For more details, please check:
https://www.facebook.com/groups/spooky2/permalink/956417251186845/

Q11: When you say custom programs is that you load preset programs and add them to a customized list?

A: In addition to offering multiple presets and over 60,000 programs, Spooky2 also allows you to create your own presets and programs to suit your specific needs. However, many people have questions about creating custom presets and programs. Don’t worry. We’ve compiled many resources in this blog to help you learn how to make them.

https://www.spooky2-mall.com/blog/guide-on-creating-your-own-programs-and-presets/

Q12: Can you treat pre-diabetes without scalar, only XM or GenX?

A: XM and GX /GX Pro are the same when using with the Spooky2 Scalar.