Q1: Can you share a link video on the steps after doing a BFB scan with Scalar?

A: After you complete a scan, you will get a list of frequencies that show up as your results. These can be saved in a “BFB” program that you can run through the scalar unit. Select scalar shell preset, click on program tab and select your BFB program. Click on control tab, check overwrite box, click on your generator number to run the results on the scalar unit.

This video will show you how to run your scan results:
https://www.youtube.com/watch?v=NC12pLO-vBA

Q2: Will you go over grade scans? Will that scan for muscle pain and depression?

A: Spooky Pulse gives you a unique way to rapidly evaluate pathogen program frequencies for effectiveness against your condition, allowing you to identify those that will be the most beneficial for you. This process is called Grade Program Scan. Note this doesn’t work with healing or detox programs.

When you identify which individual frequencies in a single program will work the best, and which ones won’t work so well, you can then eliminate the least effective ones from each program you grade, and create your own preset which will contain only frequencies which your body has confirmed will work well for you.

For how to do a grade scan, please check this link:
https://www.youtube.com/watch?v=h01BZkGElu4

Both physical and emotional problems can be detected through biofeedback, so you can do a regular scan first for muscle pain and depression. And later apply the grade scan.

Q3: Now my scans using Generator X are now taking almost 40 minutes with the baseline. I don’t understand why it’s taking so long now when it used to take 20 minutes. Am I doing something wrong? Thanks.

A: For the GenX Pro, Set the Min Read Time to smaller value that the default .07. Setting it to 0.043 will get you a 12 minutes scan, 0.22 will get about a 7 minute scan. You can set it to 0 for an even faster scan.

You can read this information for more ideas:
https://www.spooky2support.com/hc/en-us/articles/22451645615131-Questions-on-BFB-running-time-Why-does-my-bfb-time-take-longer-time

Q4: When you use the tens pad, do you need to sanitize after or after your next usage and can it be used for another person?

A: The tens pads can be reused until it is not sticky, but I don’t suggest share it with others.

Q5: How long is it suggested to run the BFB program on remote through the XM Generator ? Once? 10 days? 3 Weeks?

A: Depending on your Spooky2 device, scanning every seven or four days is highly recommended.

Spooky2 Central/Plasma users should use the results program in a killing preset and run it once a day for four days, then scan again.

Contact Mode users should run it once daily for seven days, and then scan again.

Remote Mode should be run non-stop for a week and then scan again. Repeated scans are necessary.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1338080256353874/

Q6: Could you explain what the number between brackets means to the right of the frequency in the scan results? Is it a probability?

A: This shows which hits were strongest. If a single scan is performed, such as the GX scan preset, this number is the percentage value above the running average. If a refinement scan has taken place, this value is the raw value. The larger the number, the stronger the hit.

Q7: Does ‘Hunt & Kill’ mean the program both finds and eliminates whatever it finds?

A: Initially, this setup does a quick biofeedback scan, and a designated generator will run the hits afterward. The previous hits are then re-examined in the succeeding scan or run cycles to discover and eliminate mutated pathogens. You do not need to worry about the furtive viruses because the preset will find and eradicate them no matter how deeply and secretly they hide. The Hunt and Kill preset runs automatically until it is actively stopped or until no hits are found, then it continues to improve the findings of the initial scan.

The Hunt and Kill preset in Spooky2 Biofeedback is speedier and easier to use than the others. Compared to other presets, it is more convenient and helps you avoid tiresome, repetitive work.

For more, please check the link:
https://www.spooky2-mall.com/blog/hunt-and-kill-in-spooky2-biofeedback-scan/

Q8: When you run a scan a 2nd time, why do all the frequencies change?

A: Because when you start scanning at first, they are different each time.

This is a complex question, and there are a number of reasons why it happens. First is the nature of the terrain you’re scanning – your body.

For more, please check the link:
https://www.spooky2support.com/hc/en-us/articles/220352167-Why-the-scan-results-are-different-sometimes

Q9: Where should you put the tens pad when you have someone with pneumonia?

A: As long as not over the heart. You can choose the right lung and do front and back placement. Or you can do the lower portion of each lung so you are away from the heart.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/posts/2170617589766799/

Q10: For Scalar Biofeedback, can I use an electronic device (phone, PC) while doing the BFB?

A: Normally, you can use a phone or wear an Apple Watch in the scalar field. The EMF extends about 15 cm from the transmitter box, so we recommend having two units as far apart as possible. But while doing biofeedback, we recommend to put it aside as not to have any unknown quantity sharing the field.

Q11: Does a new person have to do 11 day terrain detox?

A: At Spooky2, we always recommend our users to run the Terrain Protocol Preset for detoxification before starting their Rife frequency treatment. Especially for the new comers. Detoxification is important before you run any Rife treatment programs.

Many people may not notice the fact that they have toxins build up in their body system. These excess toxins will actually cause physical and mental health problems such as chronic fatigue, headaches, insomnia and diseases. Many of these toxins come from things that you use or consume every day. For example, food, water, beauty and personal care products. Your surrounding environment may also affect your health conditions.

With all the toxins accumulated in your body system, Rife frequency energy cannot pass through your cells and organs effectively. Therefore, we recommend running the Terrain Protocol Preset to prepare your body for Rife treatment programs.

For more details, please go to this link: 
https://www.spooky2-mall.com/blog/why-is-terrain-protocol-the-first-step/

For how to run Terrain Protocol, please check this link:
https://www.spooky2-mall.com/blog/how-to-run-terrain-protocol-by/

Q12: Is there a way to use the Spooky2 Remote instead of the Spooky2 Sample Digitizer for BFB?

A: With Spooky2 Pulse, you can use Spooky2 Remote to administer frequencies, but my opinion is the biofeedback works better with the TENS pads. There is no way to do a biofeedback on a fingernail clipping. If you are looking for living pathogens on the fingernail clipping, you could ground it up and put it in water into the Sample Digitizer. If there is no pathogens on your clipping, this will do nothing except treat you to a frequency sweep between 41 KHz – 1.8 MHz. You cannot find pathogens in your body from the fingernail clipping unless those same pathogens happen to be on the clipping.

Biofeedback scan using the heartbeat input from your body is way more valuable.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1273548596140374/

Q13: How to run terrain?

A: Terrain Protocol is the first step of the Morgellons Protocol. It is helpful and essential for your Spooky2 healing. Not only can Terrain Protocol help you get rid of the toxins of flukes and parasites, but also deeply detoxify to get rid of any heavy metals or other substances. It prepares the terrain in your body to be more available or receptive to further Rife treatments.

More details you can learn from this link:
https://www.spooky2-mall.com/blog/how-to-run-terrain-protocol-by/

People often refer to “The Terrain Protocol” as if there was only one. There are actually three, Terrain – (R) BY,  Terrain-Mercury – (R) BY, and Terrain-Nonviolent – (R) BY. Each designed to help people in need.

For more details, you can check via this link:
https://www.spooky2support.com/hc/en-us/articles/217108388-What-is-terrain-protocol-

Q14: Can you scan yourself and use the frequencies if you are pregnant?

A: People who are pregnant are not advised to scan and use the frequency.

Q15: We have scalar each side of bed. the bed has metal parts. does this effect scalar while sleeping?

A: The metal bed would have a slight effect, but the scalar field can travel through metal and not be greatly affected. However, the link cable should be kept away from the metal, as regular EMF flows through this cable.