Q1: What is an imprinting sticker, and how to use it?

A: Holographic stickers are stickers printed on a material with a special iridescent effect. You can imprint various frequencies onto these holographic stickers using your Spooky2 devices and place these stickers anywhere you want, such as on your clothes, bedding, books, or even your water bottle. 

For more information, please click the blog: 
https://www.spooky2-mall.com/blog/another-magical-use-of-holographic-stickers/

Source: https://www.facebook.com/groups/spooky2/posts/3163692900459258

Q2: What is the maximum number of frequencies that can be imprinted onto a holographic sticker?

A: I’ll give you my perspective, and maybe it will help you arrive at your own conclusion.

A single well-defined frequency can have a beautiful structure — see cymatics.

A few well-defined frequencies can be also beautiful and structured — like a musical chord.
We tend to be able to hear when multiple frequencies do not sound good together, and their structure usually is not well defined either.

When you get too many frequencies co-existing together, it will approach noise – like white or pink noise.

Sooner or later, you lose the advantage of having a well defined structure from imprinting.

Furthermore, 3 minutes of imprinting is a relative standard and while I won’t go into why, there is only so many frequencies you can get into an imprint over 3 minutes. Once you go past this mark, the starting frequencies will start to get washed out and replaced by the most freshly transmitted frequencies.

For more details, please check the link:
https://www.spooky2support.com/hc/en-us/articles/6393283172251-What-is-the-maximum-number-of-frequencies-that-can-be-imprinted-onto-a-holographic-sticker

Q3: Why Longer Sessions Create More Reliable Effects For Imprinting?

A: Let’s see what the trainer said about it:

“I was the first trainer to present a webinar on Imprinting. My reason for mentioning that, is because my ongoing research has led me to new information very worth sharing. Originally, with the Ah Method, creating saved Programs at a 0.5 Dwell does get the job done – quickly. However, since that time I figured out the leaving the Dwell at its default of 180 seconds – and changing the Dwell Multiplier to .003 of a created preset (and also using the option of, “Out 2 Runs Every Second Frequency” – is a much easier way to go for the same results. The frequencies are still applied the same number of times in the recommended 5 passes. All good, right? Stay with me here. I know we are all about having the process of Imprinting go as quickly as possible . We do, after all, live in a microwave society. Things have to happen FAST, however the fastest choice is not always the best choice. While five full passes are enough to initiate an imprint, it may not be sufficient for stability over time. For more durable results, extend the session well beyond the minimum cycles. A practical range is 15–30 minutes for small materials, and up to 45–60 minutes for larger or denser imprint media. This ensures the frequencies are layered deeply enough into the substrate to resist fading or disruption. NOTE: It is not possible to “overexpose” a material in a way that ruins the imprint. Once the carrier medium has absorbed the information, continued exposure mostly reaches a plateau effect, where no additional strength is gained. Running longer than an hour is unlikely to add benefit and may slightly reduce clarity due to field blending, but it will not damage the imprint. Efficiency peaks around 30–60 minutes, so sessions beyond this are usually unnecessary. Also, Imprints will bleed into one another unless you store them properly: kitchen foil is the way to go. So there it is, you can do it fast and it will work, but if you do it for a longer time the imprinted material will contain more stable and reliable effects. I’ve written a more extensive paper on this, and perhaps in the future I’ll do another webinar on the subject. There it is: did I get it wrong in the first place? Obviously yes, but also no. I did not get the facts wrong, but at the time I did not know all the facts. The truth is that I learn from my mistakes, and I am very willing to make lots of mistakes.”

Source: https://www.facebook.com/groups/spooky2/permalink/3206834322811782/

Q4: How long does a sticker last once put on your body?

A: Imprinted holographic stickers can last for a very long time. They can last as long as they do not get wet, worn out, or exposed to the sun and strong magnetic fields.

Q5: How to use holographic stickers for frequency imprinting?

A: Usually, we recommend using Spooky2 Remote and Spooky2 Plasma to imprint frequencies into holographic stickers. 

1. Spooky2 Remote

Complete the connection of the Spooky2 Remote and put the holographic sticker(s) onto the Spooky2 Remote Box and run the frequencies you need.

2. Spooky2 Plasma
Spooky2 Plasma is the most powerful unit amongst all the Spooky2 Rife Machines, making it an ideal choice for users fighting against complicated or severe health conditions.

Complete the connection of the Spooky2 Plasma and then place the holographic stickers to the plasma tube.

For more details, please read this blog:
https://www.spooky2-mall.com/blog/another-magical-use-of-holographic-stickers/

Q6: How long does it take to print information into the water?

A: It only takes a few minutes to imprint information into a small container. A glass of water could take 10 minutes for more. A larger container would take even longer.

Q7: How do you store imprinted stickers that have not yet been used/given away?

A: Many people put them in a plastic coin holder and keep them in a pocket. They last longer. Usually use a plastic coin holder or a very, very small ziplock baggie.

Q8: What is the best material for frequency imprinting?

A: Quartz crystal is possibly the best thing, but clean high-quality sand, water, oils, other gemstones, silver, copper, and gold are also good. Lots of people like hologram stickers too. It depends on what you are doing and how you want/need to use it.

For more details, please check the link:
https://www.spooky2.com/forums/viewtopic.phpf=28&t=14868&sid=86ce08e13355b281c4daad3d8670402d

Q9: Is there a difference between structured and imprinted water?

A: Essentially both processes end up with a similar result in that the water molecules have been restructured with different frequencies. You can imprint multiple frequencies of your choice into water. I assume that frequencies generated by a DIY water vortex device would typically be in a higher frequency range compared to say flowing water in a river or stream would be in a lower frequency range. I restructure my drinking/cooking water with containers having a closed wire coil and rely on the earth’s resonant frequency to restructure the water which takes a few days.

For more details, please check the link:
https://www.spooky2.com/forums/viewtopic.php?p=160740 

Q10: Is it better to imprint from the Central or the generator?

A: Generally speaking, it is better to imprint from the generator. Plasma is a broad-spectrum transmission device. You can put a nice clean frequency into a plasma tube, and what you get out is a Smorgasbord of harmonics from the tube. When you imprint frequencies into the water, generally, the idea is to put known frequencies into the water. If you are using your plasma, you are putting a whole lot of frequencies into the water. So it may or may not be what you want to do. So most people will use coil or the Spooky2 cold laser to imprint frequencies.

However, Spooky Central is the most powerful tool you can use for the very serious conditions, such as the very serious conditions. If you are currently treating yourself with Spooky Central, it may be a wonderful idea to have a vial of water nearby, and treat that whilst treating yourself with the plasma tube, and then between sessions you can drink that water.

Spooky is wonderful for experimentation, and we get a lot of feedback from people for ideas, so this maybe an idea where you can treat yourself with plasma during one session and then you can also treat yourself between sessions with water that has been imprinted with exactly the same frequencies that you have applied.

Q11: Is it recommended to use colloidal silver to imprint?

A: As I understand, you can imprint any liquids. Most people use water, because it’s convenient. And they use pure water because of the fact that it is more effective when you take it internally.

I can’t think of any reason why colloidal silver can’t be used for frequencies imprinting. The colloidal silver preset that comes within Spooky2 is based on the research paper that found there was actually an ideal frequency to create the silver and more than that an ideal waveform to ensure there’s no buildup of sludge on the electrodes that are making the colloidal silver. But that’s really looking at the ideal way of creating colloidal silver rather than imprinting a frequency for treatment. I guess you can modify the preset that comes within the Spooky2 software, and apply different frequencies using the same waveform, but I’m not sure whether the colloidal silver would be of the same quality, because it is not the optimum frequency.

But if the colloidal silver has already been made and would be subsequently applied the frequencies using Spooky2 cold laser. I don’t see any reason why not. So it might be one of the things where you can do two things at once.

You are ingesting the colloidal silver that has got very strong anti-bacterial properties and you are also ingesting using these frequencies internally.

Q12: Spooky2 Imprinting Instruction.

A: Please check this blog for more details:
https://www.spooky2-mall.com/blog/easy-spooky2-frequency-imprinting/