Q & A of Spooky2 Central
Q： How do Place TENS Pads While Doing Biofeedback Using GeneratorX?
Answer: The following will help you determine the ideal TENS pad locations for GeneratorX biofeedback sessions.
Here is the blog that explains details for you: https://www.spooky2-mall.com/blog/how-to-place-tens-pads-while-doing-biofeedback-using-generatorx/.
Q: Can I use contact, plasma, coil, or ultrasonic at the same time or individually?
Answer: You can use them either at the same time or individually.
Q: What to do if the Plasma tube does not light up?
Answer: There can be many reasons why the tube does not light. You can eliminate many of the reasons by first checking the ultrasonic transmitter. Choose the “JW- Spooky Central Overnight Sweep Low Frequency” Preset and run it, with the front panel selector switch on Spooky2 Central set to “Slow”. If you can hear the ultrasonic transmitter, then most likely something is wrong with either the tube connections or the tube.
Here is the link for more details: https://bit.ly/3Mhu7zD.
Q: Why the near field is more effective?
Answer: That is the field type used by doctors when they used the original Rife machines. They found that beyond several feet the results were not so good. The signals can still be detected but the field starts turning into a far field. Plasma produces two related fields. The one that does the really heavy lifting is the near-field, and this extends six inches from the tube in all directions. After six inches, it becomes far-field, which isn’t as effective as near-field, although it still works efficiently enough to disinfect and clear mold from a home. So it still works on the body, just not to the same extent and power as near-field.
Q: Can I place the PEMF Coil on any side of my skin?
Answer: Spooky2 Coil = BN side of the coil to skin. The coil can be used to help defuse chronic pain, regenerate tissue, and cellular repair. Some have chosen to secure it depending on where it is needed. For example, if it is an ankle, I fit nicely right inside your sock.
Spooky2 Coil Instructions: https://www.docdroid.net/Wab3Srl/spookycoilinstructions.pdf.html
What Can You Do With the PEMF Coil?
https://www.youtube.com/watch?v=iD35mOpzVn4
For more details, please check: https://www.facebook.com/groups/spooky2/permalink/590236861138221/
Q: How can I connect TENS Pads to Spooky2 Central?
Answer: If you want to use the TENS Pads of Central, you can connect TENS Cable and TENS Pad first. Then you need to connect the TENS cable to the 3.5mm Audio to BNC cable and convert the TENS cable to a 3.5mm MP3 style plug. And plug the adapter cable straight into the socket of Contact on Central.
The detailed as below:
The picture of 3.5mm Audio to BNC cable as below:
Q: Can Spooky2 ultrasonic be used on the face like many ultrasound technologies?
Answer: Yes, Spooky2 Ultrasonic can be used on your face, and there is no risk. You can use Ultrasonic to do a face lift, but it has to work together with Spooky2 Central.
Q: Are all accessories working all the time if plugged in Spooky2 Central?
Answer: Yes, if plugged in they are running, and please never unplug when it is running as the chip inside can blow. The Spooky2 Central can decipher what contact is attached. You only run the Spooky2 Central setting for it, not contact.
For more details, please check this link: https://www.facebook.com/groups/spooky2/permalink/1142193492609219/
Q: Can Spooky2 Central run the plasma and PEMF at the same time for two different people?
Answer: 1. If two people are close enough for the PEMF to stretch in one direction and the bulb in another, Yes. They can be used for different people – but be aware that the plasma energy can reach further than the cables can stretch, so the one using the PEMF can definitely be helped by a lesser strength.
2. Yes, you can. However, the program you use should be suitable for both people.
For more details, please check the link: https://www.facebook.com/groups/spooky2/permalink/822740041221234/
Q: Can l connect both GX and XM to one Spooky2 Central?
Answer: No, you must choose one generator to connect to the Central. I personally would use the GenX as it is better insulated and works better in my opinion. You can then use the other generator in GenX for other things. What most do is have a powered USB hub and plug in both generators to it then connect the hub to the computer.
For more details, please check the link: https://www.facebook.com/groups/spooky2/posts/2183743465120878/
Q: Can we connect hand cylinders to Spooky2 Central? What about other contact accessories?
Answer: Yes, you can connect these contact accessories to Central and do contact mode via Central, but it’s not what you think. It is a set frequency to open up cell walls and not something you can program. It is recommended each time you use the Central to do Contact via TENS pads to make your plasma session even more successful.
For more details, please check the link: https://www.facebook.com/groups/spooky2/posts/2183827375112487/
Q: When using contact mode, what is the difference between connecting the Tens Pads into the Central box and connecting them straight off a GX?
Answer: When using the contact via the central you are getting one frequency only which is to open up the cell walls for better penetration. This should always be used in combination with the Phanotron bulb. Contact with tens via a generator gives you various frequencies you have programmed. Highly suggest you study the user guide as you are not utilizing your equipment if you don’t know how to use it.
For more details, please check the link: https://www.facebook.com/groups/spooky2/posts/2119549461540279/
Q: For Spooky2 Central, when I use the Plasma tube, should I keep other accessories unplugged?
Answer: Most people use the accessories as well as the Plasma Tube as that is the most powerful way to treat a body. When I only want to use the Plasma tube I am careful to always disconnect the other accessories BEFORE turning the Central machine on. We are told that if we attach or disconnect any accessory while the Central machine is turned on it can damage the Central machine. I don’t use the accessories all the time for a few reasons, 1. I do not have a life-threatening illness. 2. If I think I am likely to get a cramp and need to jump out of bed very quickly I don’t want tens pads on me and wires going everywhere. Reasons like those.
For more details, please check the link: https://www.facebook.com/groups/spooky2/posts/2099793956849163/
Q: What’s the difference between Spooky Phanotron Tube and a Spooky Straight Tube?
Answer: Many users asked about the differences between Spooky Phanotron Tube and Spooky Plasma Tube and which one to choose.
This post will help you understand the differences and choose between the two: https://www.spooky2-mall.com/blog/what-is-the-difference-between-spooky-phanotron-tube-and-spooky-straight-tube/
Q: What’s the difference between using the PEMF coil with Spooky Central and Spooky2-XM generator?
Answer: Spooky Coil can be used with both Spooky Central and a Spooky XM generator. The differences are itemized below. More details can be found via this link: https://bit.ly/3fIElwM.
Q: Should I feel anything in contact mode of Spooky2 Central, for example using TENS Pads?
Answer: The voltage pulse from the contact port is very brief. Certainly too fast for humans to detect.
The TENS pads connected to the SC is a fixed 100 Hz ultrashort voltage spike of 320v, which is very high, but the duration of the pulse is extremely short. The pulse lasts for less than half a microsecond. A microsecond is one millionth of a second. You will not feel it no matter what you try, and this is a good thing being 320v of power. The pulse waveform is shown below. More details, please check this link: https://bit.ly/3SLPUC0.
Q: Is phanotron tube safe for the head?
Answer: Yes, the phanotron tube is for concentrated energy on a given issue, like a localized problem. You can keep it at a distance of 15cm~20cm when have a treatment, and please do’t get too close.
