Q1: Where to connect Cold Laser?

A: Hello, you could check this blog of cold laser instruction:
https://www.spooky2-mall.com/blog/spooky-cold-laser-instructions/

Q2: I believe killing also kills good stuff along with bad in our bodies, how do we get the good back into our bodies?

A: 1. Each different organism has its own frequency signature, so unless two entities MOR (mortal oscillatory rate) is within the same tolerance range of a frequency, both won’t be harmed by a single frequency.

The possibility of killing good and bad together arises when a program with many frequencies or a sweep program is used… In these cases, it is possible to kill both at once, so these are typically noted with cautions, or ways to benefit the good while killing the bad to shift the ratio back into balance.

2. This is a great blog article on this subject.
http://www.spooky2-mall.com/blog/does-a-rife-machine-harm-normal-body-cells/

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/730784777083428/

3. “I usually take my probiotics at night and have fermented foods in the afternoon so depending on how long the preset I choose to run. It would probably be best doing it in the morning when take other things to break down biofilms and kill supplements.”

Q3: How works High Power Boost?

A: Here is the blog explaining the differences between colloidal silver port and high power port, please check it:
https://www.spooky2-mall.com/blog/whats-the-difference-between-high-power-port-and-colloidal-silver-port/

Q4: Can we run the same saved (among 30) program for contact and also for remote?

A: Yes, most likely you would want to stop the remote program, select an appropriate Contact Preset, change the hardware – remove the remote and connect the Contact cable, then start the Contact Program.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/posts/2089853324509893/

Q5: When you search the programs, there may be multiple hits on the same thing (ie COLD), so which one do you pick and how long do you run it for?

A: Please check this blog helping you select the programs in software:
https://www.spooky2-mall.com/blog/how-to-select-programs-in-spooky2-software/
https://www.spooky2-mall.com/blog/how-to-choose-a-program-which-suits-you-the-best/

Q6: Is there a type of computer recommended to hold and run programs?  Will it work on hot spots or need a land line?

A: Please check the link to know more about which kinds of laptop to run Spooky2:
https://www.spooky2-mall.com/blog/what-kind-of-laptop-and-computer-do-i-need-to-run-spooky2/

You don’t need wifi to run the software.

Q7: Why do we need to check Overwrite Gen?

A: The “generator overwrites” tickbox is a just a choice that the software puts up to the user (you).

If you tick this box and the click on a channel, then the s/w will copy the currently shown settings in preset, program and generator setting tabs into a specific area of the computer’s memory related to that channel.

If you do not tick the box, then it will leave the memory as it was. (and… the preset, program and generator settings tabs will revert to what was stored previously for that channel)

Once you press start in the channel box; Spooky will use what is in memory and transfer the settings, waveforms etc. to the related XM generator.

So, ticking the “generator overwrite” box and then selecting the channel could be translated to mean- “do you want to use the new settings with this generator”.

If you click on a generator you will either want to:

1. Open it up to see what is currently loaded (do not check overwrite).
2. Upload a new program to the generator (overwrite the current program, check overwrite).

For more details, please check the link:
http://www.spooky2.com/forums/viewtopic.php?f=71&t=5831

Q8: If you have metal fillings in your teeth do you need to make any adjustment to the terrain protocol?

A: It is safe to use the standard Terrain (without the minus mercury) to detox heavy metals. The frequencies will not affect your metal fillings but will remove mercury from your tissue.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1666613606833869/

Q9: In response to the reply to my quesstion, do you mean if it is the same program that I am running for multiple people I put all the samples on their own ssticker but put them all together in one remote?

A: Yes, if you are running the same program, you can wrap the DNA samples of each person separately with stickers and put them together under Remote, and run them. But need to run is a different program, then each person needs to have their own generator and accessories.

For more details, please click this link: 
https://www.facebook.com/groups/spooky2/posts/2037173473111212/ 

Q10: How long can you utilize fingernails inside the Spooky Remote?  When do you have to replace the fingernails?

A: The fingernail can be used for a long time.

Q11: How do you clean the E liquid sample slides for reuse?

A: You can use the alcohol.

For more details, please check the link:
https://www.spooky2support.com/hc/en-us/articles/360011699653-Do-the-Sample-Digitizer-slides-need-to-be-cleaned-with-alcohol-before-hand-If-I-clean-the-digital-slides-with-alcohol-can-I-use-them-within-my-family

Q12: When you are running Terrain for 11 days, can you use the machine for other things or does it have to sit for 11 days?

A: Most people run a few or more times per year and it is recommended to run Terrain alone only. This way, the other frequencies will not affect the work of Terrain. Once you are done (after 11 days), you are free to run multiple programs.

After the first time, you can do what you want. It is recommended to run alone the first time to ensure that you do not have excessive Herx and overload the detoxification pathways.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1912042158957678/

Q13: How long does the DNA sample last, and when should it be replaced?

A: Please check the link:
https://www.spooky2-mall.com/blog/what-source-of-dna-for-remote-rife-and-how-long-it-lasts/

Q14: Can grade scan be used for healing processes?

A: Spooky Pulse gives you a unique way to rapidly evaluate pathogen program frequencies for effectiveness against your condition, allowing you to identify those that will be the most beneficial for you. This process is called Grade Program Scan. Note this doesn’t work with healing or detox programs.

When you identify which individual frequencies in a single program will work the best, and which ones won’t work so well, you can then eliminate the least effective ones from each program you grade, and create your own preset which will contain only frequencies which your body has confirmed will work well for you.

For how to do a grade scan, please check this link:
https://www.youtube.com/watch?v=h01BZkGElu4