Q1: Is it correct to say Dwell equates to Minutes?

A: Dwell is the duration in time of each frequency. If you press the horn in your car for two minutes, the dwell will be 120 (seconds). A short honk for half a second will mean the dwell is 0.5. Each frequency in a set will be transmitted for the set’s default Dwell. Note that individual frequencies in a set may have their own custom Dwells assigned.

Q2: How long it last the frequencies on the holographic medium? And how many presets one can pot in it? (that is how many frequencies)

A: You can imprint various frequencies onto these holographic stickers using your Spooky2 devices and place these stickers anywhere you want, such as on your clothes, bedding, books, or even your water bottle.

For example, if you are to imprint water, simply stick the holographic sticker to the outside of a water bottle. Leave the drink for a while for it to absorb the frequencies. Then drink it, and you will definitely receive the health benefits from these frequencies.

For more details, please check the link:
https://www.spooky2-mall.com/blog/another-magical-use-of-holographic-stickers/

Q3: How long do the stickers maintain the frequency once imprinted?

A: Imprinted holographic stickers can last for a very long time. They can last as long as they do not get wet, worn out, or exposed to the sun and strong magnetic fields.

Many like myself put them in a plastic coin holder and keep them in a pocket. They last longer. I use a plastic coin holder or a very, very small ziplock baggie.

You can find more related QA here:
https://www.spooky2-mall.com/blog/holographic-stickers-faqs/

More details here: https://www.facebook.com/groups/spooky2/posts/2583561988472355/

Q4: Can we use one of these technologies to neutralizer harmful EMFs in my space?

A: 1. Spooky2 won’t block EMF but Spooky2 Scalar may have some effect while the field is active. I would buy some tools specifically for EMF protection, both to put on your bed stand and a pendant to wear for extra coverage inside and outside the house.

There are many products out there from Orgone Pyramids, to copper tensor rings, to bio geometry symbols.

Also, it’ s important to test energy tools, as we did with John here
https://www.facebook.com/MasakiLive/videos/1545711915537242/

2. I never looked before but did find the same one you did. I have been using the 7.83 Schumann Resonance along with a tensor. It really works.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1171315099697058/

3. The chakra tone sequence helps. 20, 727, 787, 800, 880, 5000, 10000. In our home I run 375000 gated with 7.5 It also seems to quite paranormal activity.

4. You can try “emf”, “electrical sensitive reduce”, and the detox of metals, there are a lot of in the liver and the body when we are hypersensitive, i really see a difference for my sleep

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1562410337254197/

Q5: Which is more effective to imprint water – the spooky PEMF coil under the glass jar or the red light (laser) accessory? What would be the ideal dwell time?

A: Generally speaking, it is better to imprint from the generator. Plasma is a broad-spectrum transmission device. You can put a nice clean frequency into a plasma tube, and what you get out is a Smorgasbord of harmonics from the tube. When you imprint frequencies into the water, generally, the idea is to put known frequencies into the water. If you are using your plasma, you are putting a whole lot of frequencies into the water. So it may or may not be what you want to do. So most people will use coil or the Spooky2 cold laser to imprint frequencies.

However, Spooky Central is the most powerful tool you can use for the very serious conditions, such as the very serious conditions. If you are currently treating yourself with Spooky Central, it may be a wonderful idea to have a vial of water nearby, and treat that whilst treating yourself with the plasma tube, and then between sessions you can drink that water.

Spooky is wonderful for experimentation, and we get a lot of feedback from people for ideas, so this maybe an idea where you can treat yourself with plasma during one session and then you can also treat yourself between sessions with water that has been imprinted with exactly the same frequencies that you have applied.

Q6: I want to know if I can use the PMF coil device over my eyes, and is this to stay at the same place or I move it around?

A: Yes，you can use it on your eyes.

If the spot you are working on is focused, you don’t need to move it.

If the area you are working on is much larger, then moving it over time would be appropriate. However, you don’t need to move it as if you are massaging the area.

Depending on how many frequencies you are using (I just use 1 typically), you may wish to move it every 15m or after one loop of your frequency list has been applied.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/posts/2044850782343481/

Q7: When you do imprinting is it only done with the scalar? Or can you do it with any of the other devices?

A: No, there are four ways to imprint frequencies into water using Spooky2. They are Spooky2 PEMF Coil, Spooky2 Cold Laser, Spooky2 Plasma and Spooky2 Scalar.

For more details, pleas check the link:
https://www.spooky2-mall.com/blog/easy-spooky2-frequency-imprinting/

Q8: Is there anything I need to do before imprinting water to make it more effective?

A: You could try vortexing water. I believe it should precede imprinting.

So it’s more about making water structured than imprinting, but one shouldn’t plant roses when forests are on fire :). When you have water structured, then imprinting it is far easier and long lasting, I believe.

There’s a simple way of making water structured via applying a Spooky2-XM generator, and a one-dollar electric motor (and a vortex).

I made a film showing the procedure – it’s in Polish, but self-explaining, all the more I added an explanation in English under the film. You may want to see it:
https://www.youtube.com/watch?v=r9AYSkoo9QA

The water I get after 15 min of vortexing is something much more than I expected. Water is absolutely tasty. If you want to know what “absolutely tasty water” means follow this procedure and drink the water.

Additionally, only with such water further steps (imprinting) “get wings”, I believe.

For more details, please check the link from:
https://www.spooky2.com/forums/viewtopic.php?f=6&t=10409

Q9: How long do you leave the water in the scalar field to imprint it?

A: Only a few minutes. Perhaps 3 or more.

Q10: Will it be over dosage if the imprinting time is too low?

A: There shouldn’t be any concern about over-doing the imprinting since JW has said that with scalar fields, your body and the water/substance will take what it needs and discard any excess. So they only real concern should be if the imprinting is long enough or too short.

Q11: Is there a difference between structured and imprinted water?

A: 1. Essentially both processes end up with a similar result in that the water molecules have been restructured with different frequencies. You can imprint multiple frequencies of your choice into water. I assume that frequencies generated by a DIY water vortex device would typically be in a higher frequency range compared to say flowing water in a river or stream would be in a lower frequency range. I restructure my drinking/cooking water with containers having a closed wire coil and rely on the earth’s resonant frequency to restructure the water which takes a few days.

2. Essentially both processes end up with a similar result in that the water molecules have been restructured with different frequencies. You can imprint multiple frequencies of your choice into water. I assume that frequencies generated by a DIY water vortex device would typically be in a higher frequency range compared to say flowing water in a river or stream would be in a lower frequency range. I restructure my drinking/cooking water with containers having a closed wire coil and rely on the earth’s resonant frequency to restructure the water which takes a few days.

For more details, please check the link:
https://www.spooky2.com/forums/viewtopic.php?p=160740 

Q12: How long does an imprinted holographic sticker last? Any suggestions on how to keep the holographic stickers to stay on better?

A: Imprinted holographic stickers can last for a very long time. They can last as long as they do not get wet, worn out, or exposed to the sun and strong magnetic fields.

Many like myself put them in a plastic coin holder and keep them in a pocket. They last longer. I use a plastic coin holder or a very, very small ziplock baggie.

You can find more related QA here: 
https://www.spooky2-mall.com/blog/holographic-stickers-faqs/

More details here: https://www.facebook.com/groups/spooky2/posts/2583561988472355/