Q1: Can I add a preset to a shell that includes my biofeedback results? How should I save Biofeedback scan results as a preset?

A: Here is the process, using remote and the killing shell for this example:

(1) In the PRESETS tab, select Shell (Empty) Presets > Remote > Killing (R) – JK

(2) Move to the PROGRAMS tab, search your scan results and double-click them down into the Loaded Programs box. They are now “inserted” into the correct preset shell.

(3) Move directly to the CONTROL tab, check “Overwrite generator”, select your gen, ensure your latest scan (with shell) appears, then click start.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1679078475587382/

Q2: Can the PEMF coil be used on the face and head?

A: Yes, it is safe.

Q3: Are any of the contact modes can create any issues to someone who have a titanium pin on the right wrist? For example when do biofeedback with Generator XM?

A: Electronic implants like pacemakers can be problematic when using contact mode. Also, metal implants may make contact mode uncomfortable. Electricity applied to the body will always strongly affect something as conductive as metal, and it can even cause it to ionize if the voltage is too high. Using the correct Spooky Boost output port prevents this.

Q4: Is scalar the only way you can imprint?

A: No, there are four ways to imprint frequencies into water using Spooky2. They are Spooky2 PEMF Coil, Spooky2 Cold Laser, Spooky2 Plasma and Spooky2 Scalar.

For more details, please check the blog:
https://www.spooky2-mall.com/blog/easy-spooky2-frequency-imprinting/

Q5: How can I know what frequencies is proper for me to tune the scalar boxes to? Should I set it to a specific frequencies if I’m just using pure scalar as I see there are many that I pass through when tuning by the brightness of the lit light?

A: This video will show you how to set up and tune Spooky2 Scalar:
https://www.youtube.com/watch?v=Ywna_3sI4Ns

Q6: If someone has been diagnosed with a brain tumor in one of the ventricles in the brain – can you do remote healing for this as the person is not local? If so what is the best preset for this?

A:Let’s see what our users said about the brain tumor:
1. Chemo rarely works in the brain because of the unique blood barrier, although, I believe there are new ways of breaching the barrier, I wouldn’t want to risk that.

If you are going to choose the radiotherapy route then there are radioprotectors and radiosensitizers that make tumor cells more susceptible to radiation damage, while also protect normal tissues from the damaging effects of radiation. Life Extension has an excellent article with supplement suggestions and alternative treatments such as Hyperbaric Oxygen and Proton Beam.

See: http://www.lifeextension.com/Protocols/Cancer/Radiation-Therapy/Page-01

For more, please check the link:
https://www.spooky2support.com/hc/en-us/articles/219236327-Any-suggestions-on-brain-tumor-about-4cm-in-size-in-MRI-test-recently

Q7: Is it recommended to do detox programs after terrain and prior to the killing programs? Or is the terrain sufficient enough for detoxing?

A: We suggest you do terrain as the first step of Spooky2 treatment, if you skip Terrain, your body may be too toxic for the frequencies to be absorbed well.

You may also get sicker, as any healing done will be accompanied by toxin dumping, but the detox pathways are not optimized – or stimulated at all, so may not work well. Additional toxins being released into the blood without the detox pathways being able to handle it can cause extreme illness.

Terrain slowly – just pause when you need to so the body can catch up. Once you feel better, run for a while until you start to feel like it’s enough, then pause again… In this way, it will get done as you can.

For more details, please check this link:
https://www.facebook.com/groups/spooky2/permalink/1810994902395738/

Q8: Will increasing the voltage increase the power and effectiveness of Spooky2 Remote?

A: 1. Use a Boost with the Remote if you want more power.

2. More amplitude will not be more effective with remote. In fact, some people have said that it is more effective for them to use between 3 and 5 volts. The only thing I have heard that more than 5 volts does is damage the DNA sample more quickly so it needs to be replaced sooner. I haven’t attempted to verify the claim.
   
   
3. I don‘t think so. The remote shells are there for a reason and they are set to provide waveform and pattern as well as amplitude for the right level of effectiveness.
   
   
4. The recommendations in the user guide are Contact Mode – Amplitude: 14-20 volts and Remote Mode – Amplitude: 5-20 volts. 20v does not mean the program was more effective. 5v may be the best. This will vary depending on the individual’s sensitivity. Some people need to have a low amplitude, while others need or prefer higher.
   
   For more details, please check:
   https://www.facebook.com/groups/spooky2/permalink/960290187466218/
   
   For more details, please check the link:
   https://www.facebook.com/groups/spooky2/permalink/1385038548324711/
   https://www.facebook.com/groups/spooky2/posts/2754704064691479/

Q9: Can I do the cold laser the whole night through? or is it too much?

A: Treatment times depend on what is being treated. In general, the ideal duration of Cold Laser would be around 30 mins. With longer treatment time, it will not cause damage to tissues, but it also won’t increase the effectiveness of the treatment. And 1-2 times a day would be okay.

If you are running different frequencies to perform the treatment there is no maximum session time. The 30 minute session time refers to treatments that use the light wave frequency to stimulate the body’s immune system. 

Q10: The XTRA, KHZ, VEGA, HC, could you please explain? Thank you. Someone said data base name, but please explain more for a toddler in learning.

A: The most important part of any Rife frequency therapy is using the right frequency in a form that is clean enough and accurate enough to be effective. In this article, the various sources for frequencies are discussed.

For more details, please check the link:
http://www.spooky2-mall.com/blog/rife-frequency-sources/

Q11: Can I stop a preset and then restart it from the same place?

A: Yes. You have 2 options. The first is to stop the generator with the Stop menu item in the Global menu. Shut down everything, set up in another room then restart using the Resume command in the Global menu. This works if the generator comes up with the same number in the control panel. The other option is to load up Terrain in a generator, type 3 in the Preset field, type the Tab key, the click Start. This will start Terrain on the 3rd day.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1386228184872414/

Q12: How to add presets to preset chain?

A: 1. Put your scan results in an empty shell.
2. Save it as a preset.
3. Go to the presets, add your preset to the chain, and the other presets you’d like to add. Add it in the order you’d like.
4. Take care, that the presets you add should have a limited duration. Either by not repeating forever or by adding a duration in the settings.
5. Then save the preset chain as a new preset.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1204320249729876/

Q13: How do I make presets to loop continuously?

A: If you choose remote preset, you don’t need to change anything, it will run non-stop. If you still want to change, please change the repeat chain to 0 in the newest software, don’t change repeat sequence now.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1377051479123418/