Q1: Do you have to put sample in paper or can you just put nail in device?…I have not been using paper.

A: If your sample is to be the lone occupant of the remote. Stickers came with the remote so why not use them? Putting the nail piece in the sticker with the date is a good idea. I use just one sticker and fold it over. Others, less thrifty, use two stickers per sample.

2. Masking tape works to keep separated.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1559100427585188/

Q2: Do you use sometimes the MN Output? If yes when?

A: 1. MN was used for the inverse magnetic polarity device that is no longer used due to adverse effects in many people. It is suggested that we no longer use this Boost output, although it is still placed for longer-term users who still have the devices and choose to use it.

I couldn’t ever use the MN polarity, so for me, it is a total “Do Not Use.”

2. Apparently Killing effects on MN port is stronger but should not be used long term (example 4+ days in a row)

I alternate between BN and MN usage and I can’t tell which one is more effective as it both seems to work.

3. MN = magnetic north BN = bio north. In only rare instances is MN used. 99% of the time you want BN to be the one to use.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1418185045010061/

Q3: Can you use hair?

A: Not when the hair doesn’t have bulb. Fingernails are best because the DNA will not decay over time, but hair with bulb or any other DNA sample such as saliva on paper may be used.

Please check this blog for more details:

What Source of DNA for Remote Rife and How Long It Lasts
http://www.spooky2-mall.com/blog/what-source-of-dna-for-remote-rife-and-how-long-it-lasts/

Q4: How to run the program 24,7 continuously?

A: If you choose remote preset, you don’t need to change anything, it will run non-stop. If you still want to change, please change the repeat chain to 0 in the newest software, don’t change repeat sequence now.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1377051479123418/

Q5: How many times should one run a biofeedback session?

A: Depending on your Spooky2 device, scanning every seven or four days is highly recommended.

Spooky2 Central/Plasma users should use the results program in a killing preset and run it once a day for four days, then scan again.

Contact Mode users should run it once daily for seven days, and then scan again.

Remote Mode should be run non-stop for a week and then scan again. Repeated scans are necessary.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1338080256353874/

Q6: Is there a setting to help sleep?

A: Yes. There are programs in the Spooky database specially designed for helping people fall asleep and have deeper sleep. Many people no longer take sleeping tablets after using Spooky.

Recommended sleep frequencies:
1. Melatonin MW worked for me. I hour on Remote before bed.

2. I have used with PEMF – frequencies imprinting in water of Melatonin and work very well.

3. I run these programs: sleep to induce, muscles to relax, calming, sleep restoration.

For more details, please check the link:

https://www.facebook.com/groups/spooky2/permalink/1705484209613475/

Q7: Can I run Remote and Foot Bath in one GenX at the same time?

A: Yes. You can run two things at once on the GenX Pro because it has two generators. Just make sure you use the right shell preset for the transmission mode you are using (Remote vs Contact).

More information here:
https://www.facebook.com/groups/spooky2/posts/2702037493291470/

Q8: Can you explain what’s in the ‘shell empty preset’?

A: The empty shell presets are only settings. You choose an empty shell preset then go to the Program tab to choose your programs. Then load this program into a generator on the Control Tab.

If you do not choose an empty shell preset but go to the Programs tab first, it will load the default settings which would be the last loaded program in the Control Tab. And if it is your very first time to run anything, it defaults to Healing – Remote – JW.

For how to build you own preset, please check this link:
https://www.spooky2-mall.com/blog/how-to-make-your-own-presets-out-of-shell-presets-october-software-version/

For more details, please check this link:
https://www.facebook.com/groups/spooky2/permalink/1099475703547665/

Q9: Can you put in DNA from different people in the same device? How many people’s DNA can be put in a remote?

A: Yes, you can. The fingernails can be put in one remote together as long as you’re going to run the same programs for them, but we recommend keeping them separate with different paper stickers. Please be kindly noted that it’s not suggested putting human’s and animals’ DNA sample in one remote. And it’s better not to put your DNA sample with people who have serious illness in the same remote.

If use the nail, 1. You need to ensure each piece of nail is isolated within tape or label so that the DNA doesn’t touch. Also, this enables you to easily remove someone’s nail should they experience a Herx. Make sure you label each so you know which sample belongs to which person. As long as they fit, it will work. Some have stated that they have put in 50 at once.

If you’re using one of the newer “clamshell” remotes, make sure it closes completely. Thus, if putting in multiple nail samples, they would need to be tiny. Just a sliver is enough.

For details, please check this link:
https://www.facebook.com/groups/spooky2/permalink/1117620718399830/

Q10: How many times can terrain protocols or detox protocols be run? Once a month?

A: Let’s see what our users said about it: I’ve run the Terrain protocol continuously for over 3 months, with no detriment. If you are in good health, it shouldn’t hurt to run it for a year, but I don’ think it is necessary. I think its probably better to run it periodically (say once a month) rather than continuously, as your body can become accustomed to it.

When you first start using Spooky2, we usually recommend doing a Terrain Protocol first. The Terrain Protocol is a carefully stepped detoxification process. The Terrain Protocol will remove heavy metals, chemicals, systemic toxins, bacteria, and parasites from the user and improve their liver, kidney, and lymphatic functions. After the protocol, your body will be rid of toxins and start to recover on its own. Also, Rife frequencies will be more effective because toxins could block and absorb rife frequencies, leaving less energy for your cells. That is why we suggest the Terrain Protocol before Rife treatment.

You can find more information about Terran Protocol from here: https://www.spooky2-mall.com/blog/all-you-need-to-know-about-terrain-protocol/

For more details, please check this link:
https://www.facebook.com/groups/spooky2/permalink/1131337823694786/

Q11: Where can I get the DH experimental downloads?

A: Please check the link:
https://www.spooky2support.com/hc/en-us/articles/17385082387867-How-to-install-the-DH-Presets

Q12: How often do you need to change the DNA sample?

A: Please check the link:
https://www.spooky2-mall.com/blog/what-source-of-dna-for-remote-rife-and-how-long-it-lasts/

Q13: Is remote as powerful a treatment as Scalar or Tens pads?

A: Depends on the measurement basis… If you are talking about effectiveness per day – Remote and Contact are approximately the same.

Yet, if you talk about hours connected to gear, Remote wins hands down, because you don’t need to ever be connected…

If you are talking about per day, they are roughly equivalent in effectiveness per calendar day. If you talk about one hour of computer time for each, then Contact wins – because remote runs 24 hours per day… It is all about perspective. For me, Remote wins big because I don’t even need to be tied to the computer for normal programs.

Just need a connection for biofeedback sessions – which are equivalent between all modalities.

The Benefits and Advantages of Using Spooky2 Remote Mode

Non-local Treatment: No physical proximity is required, enabling treatment from anywhere.

Convenience: Once set up, the treatment runs continuously, ideal for busy schedules.

Extended Treatment Duration: Without physical contact, users can run treatments for extended periods, enhancing effectiveness.

Personalized Healing: Frequencies can be tailored to individual needs, providing customized treatment.

Comparison with Other Modes

1. Time Required

1 hour on plasma = 5-10 hours on contact.

1 hour on contact = 10-20 hours on remote.

1 hour on plasma = 50-200 hours on remote.

2. Effectiveness for Acute or Aggressive Conditions

Remote mode is less effective for acute conditions like gout attacks and aggressive diseases such as cancer compared to contact or plasma modes.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/posts/2096626683832557/

Related Blog:
https://www.spooky2-mall.com/blog/experience-healing-anytime-anywhere-with-spooky2-remote-mode/

Q14: Does the generator have to stay connected to a computer while running?

A: If you use the XM, then yes. But if you use the GX pro, you don’t need to connect to the computer all the time.

For more, please check the link to know the differences between the two generators: https://www.spooky2support.com/hc/en-us/articles/360014884573-What-is-the-difference-between-GX-and-XM-Generator