Q1: What is the longest distance I can expect remote to reach?

A: There is no longest distance, it can be conducted remotely. Distance is irrelevant. You don’t have to be in the same room as the machine, or even in the same country.

Q2: I have heard it said by other instructors that one should not run programs in excess of 4 hours. If this is so, why can terrain run for 11 days?

A: You may run your Spooky Remote continuously. It’s suggested keeping your program to 4 hours or less for a single pass. Run this repeating 4 hour or less loop 24/7 for at least 120 loops.

The reason for the 4 hour loop limit is that remotes work by repeats. To gain efficacy, you will want the frequencies to repeat at least once every 4 hours.

If you stack too many programs, then the repeats do not happen often enough and efficacy is lost.

For remote programs, you will want to aim to let a program run for 120 loops at a minimum.

This generally puts a remote program out to 3 days. Many will run it for a week before re-evaluating changes.

For more detail, please check the link:
https://www.facebook.com/groups/spooky2/permalink/678326885662551/

As for the Terrain Preset Chain, each preset in the chain is a relatively short sequence that is repeated for either 24 or 12 hours, then automatically steps to the next preset in the chain. The 15 presets run for 11 days. The chain should move forward automatically when run via remote when the generator is connected to the software.

Q3: What’s the reason for keeping the nails separate?

A: The fingernails can be put in one remote together as long as you’re going to run the same programs for them, but we recommend keeping them separate with different paper stickers as for quantum entanglement.

Family members, those who live in my household already, those who you spend time with on a daily basis, your energies are already entwined.SO pls keep them in separate stickers.

But be kindly noted that it’s not suggested putting human’s and animals’ DNA sample in one remote. And it’s better not to put your DNA sample with people who have serious illness in the same remote.

Q4: How many times does one do any particular protocol for it to be successful? For how many days or hours should I receive treatments?

A: Once is not enough. Typically you run them until either your symptoms go away, or you determine that these frequencies are not working for you. On the Spooky2 Remote, we recommend running 24 hours a day for at least 3 days. On Contact, you would probably run each set several times per session, 2 sessions a day, for 3 days or so minimal (unless your symptoms disappear, at which point you can stop).

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1545082692320295/  

Q5: This is a two-part question. First, what is the proper way of handling generator errors? When I get a generator error, the software jams up completely and I have to restart everything. And second, what are you supposed to do when the software does not detect all of your generators?

A: For generator errors, this is typically either a loose connection (meaning cable not secure, or faulty cable), or micro-brownouts can cause this too. For the micro-brownout issue, you can buy a UPS (Uninterruptible Power Supply) from Amazon and this will protect you against these brownouts.

But when this happens, shut down the computer, turn off the generators, then turn everything back on again.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1788538397974722/

For detecting devices, pls go to Utils, then rescan devices. And if it still won’t work, use a new USB cord for generators.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1659123597582870/

Q6: I’ve heard one person say before to run terrain on one generator and detox maintenance on your 2nd generator. Is this a good idea or would this be too much all at once?

A: It is suggested you run Terrain Protocol detox itself the first time. But in subsequent frequency treatment, another program can run concurrently with your terrain protocol. You can run whatever you want.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/posts/2170999793061912/ 

Q7: How long is your DNA sample good for? Do you need to do a new one every 6 months or so?

A: For Nails: we recommend using fingernail as DNA sample as it’s easier to get and last the longest. the DNA contained in fingernails is encased in hard keratin which protects it from degradation. It can be used for a very long time.

Saliva: cut a strip of blank paper (blotting paper is best) about two inches long and one inch wide. Place the top one-third of this in your mouth for about five minutes, or until it becomes saturated with saliva. Allow it to air-dry for about 10-20 minutes before placing it into your Remote. Good for about three days.

Buccal Skin Cells: this is how police do large-scale DNA testing after certain serious crimes. As above, use a strip of paper, but don’t allow it to soak in your mouth. Instead, rub the top one-third gently but firmly against the inside of your cheek for a moment. If it becomes wet, allow it to air-dry as above. Good for about 4-5 days.

Blood: for this you need a pack of lancets designed for diabetics to safely test blood sugar levels. These are inexpensive and available from all pharmacies. Wash your hands thoroughly first, then follow the directions on the pack. Smear the droplet of blood on the top one-third of a strip of paper. Allow to air-dry for a few moments. Good for about 5-6 days.

Hair: the shaft contains no DNA, only RNA. So it must have the root “bulb” attached. Good for about two days.

Q8: Don’t you have to do a baseline scan beforehand?

A: Baseline is a preset that automatically removes all electrical noise from the signal. When no sample is found during a biofeedback scan, Baseline is a terrific tool to help you determine the signal over the scan. Performing a baseline right before a scan can greatly improve the results. For example, some may worry about Wi-Fi signals, electrical sounds, and other problems that could affect the scan results. However, doing Spooky2 Baseline before the scan can help the system ignore these disturbances and produce the most accurate scan results.

Q9: Does it matter if toenails /nails are painted?

A: It is the DNA in the nail that decides where the energy goes. A nail with nail polish should do fine.

Q10: What if you have a ton of health issues and don’t know where to start?

A: At Spooky2, we always recommend our users to run the Terrain Protocol Preset for detoxification before starting their Rife frequency treatment. Many Spooky2 users do not understand why the Terrain Protocol is best to run as the first preset. The answer is actually quite simple. Detoxification is important before you run any Rife treatment programs.

You can check the below blog for further information:
https://www.spooky2-mall.com/blog/why-is-terrain-protocol-the-first-step/

Q11: When you create a program, how can you delete it later, does the program go into my database, or it goes to the entire Spooky database?

A: Here is a video that helps you to tackle this question:
https://www.youtube.com/watch?v=IoIhD-7I8qk

For more information about operation on your custom program, please read this blog:
https://www.spooky2-mall.com/blog/guide-on-creating-your-own-programs-and-presets/

Source: https://www.facebook.com/groups/spooky2/posts/2718103811684838/