Q1: Where should I place TENS pads for Breast Cancer so that it will not affect the heart?

A:You can place the TENS pads across the breast without the signal going through the heart.

Q2: Can I run Contact with socks and TENS Pads at the same time?

A: You should not run two separate machines doing contact treatment (sending frequency via electrodes, socks or so) on the same body. The frequencies will add up to each other and you will get new frequencies.

The pathogens that go into resonance with the original frequencies might not go into resonance with the combination anymore.

However, you can run remote and contact at the same time.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1435670389928193/

Q3: If I am using remote for one thing, can I still do contact with another?

A: Yes, if you have a second generator, of course you can do it…

You shouldn’t try to do contact and remote on the same generator, though…

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/623182887843618/

Q4: I have been told not to use contact with people who have hip and knee replacements is that correct?

A: Yes. Electronic implants like pacemakers can be problematic when using contact mode. Also, metal implants may make contact mode uncomfortable. Electricity applied to the body will always strongly affect something as conductive as metal, and it can even cause it to ionize if the voltage is too high. Using the correct Spooky Boost output port prevents this.

For more, please check the link:
https://www.spooky2support.com/hc/en-us/articles/219111447-Are-all-the-Spooky-subsystems-safe-for-pacemakers-other-electric-implants-or-metal-replacements

Q5: Where would you place tens pads for migraine pain?

A: Please never place the pads on your eyes, over your heart or above your shoulders.

For more, plesase check the link:
https://www.spooky2-mall.com/blog/tens-pads-placement/

Q6: How many times should you use the tens pads before replacing?

A: 1. About 20 times. They can be reused. You can use it until TENS pads are not sticky. After each use, you can stick them onto the plastic sheet that they originally came with.

2. They will last as long as you can keep them sticky. Over time they will either pick up too much residue and/or dry out. Keeping them stored in the bags when not in use will prolong life. You can gently rinse the sticky side with water and let dry for a day, while stuck to the plastic storage square, to remove excess dead skin, etc. This will prolong their life once they start to lose their stick. It has also been reported that you can use an essential oil to keep the sticky side hydrated and clean prolonging life.

For more information please check this link:
https://www.facebook.com/groups/spooky2/permalink/757258204436085

Q7: I get a lot of jolts from the tens pads why is that? What are the possible causes of burns from tens pads?

A: There are a number of reasons one would experience shocks and a number of ways to avoid it. Please review to see if this applies to your situation.

1. Low Frequencies. Anything under 10000 Hz is very likely to cause a reaction due to this frequency range having a high probability to react with your nervous system, causing involuntary muscle contractions.

Remedy: Use Reduce Amplitude < 10 kHz setting as depicted in the User Guide.

2. High Voltage. This couples well with point #1. There has to be enough current to also engage the nervous system; however, there also has to be enough voltage to penetrate the resistance of the skin. When the frequencies are low, there is a way to find the happy medium.

Remedy: Use Amplitude Ramp 5 Seconds (UP/Down) to gently start and end each frequency. Recommend one uses this with Reduce Amplitude < 10 kHz settings as also depicted in the User Guide.

3. I still feel too much when applying both #1 and #2.

Remedy: Plug into the CS port of the Boost. This has a resistor that will limit current, yet still, provide a proper contact treatment.

4. Wired to more than one generator. Current from multiple generators finding their pathway back into one generator.

Remedy: Do not use more than one generator in contact mode at a time.

For more, please check the link:
https://www.spooky2-mall.com/blog/what-you-can-do-when-you-experience-shocks-in-contact-mode/

Q8: Can anyone please tell me the difference between contact, remote and plasma? Which mode is best for me?

A: Contact
It is a highly effective way of applying frequencies to your body and rebalances any energy that is out of tune. Spooky2 has four types of contact accessories to suit different conditions, including Spooky2 Hand Cylinders, TENS pads, TENS Contact kit, and TENS Internal Electrode.

Remote
Spooky2 Remote allows people to go wherever they want when Remote is on. The theory behind this magic is “quantum entanglement”, which Einstein called “Spooky action at a distance”.

We all know that health is important, but sometimes we simply cannot help but ignore our own health. With your DNA, Spooky2 Remote can apply frequencies at any distance to help with your unbalanced energy and health conditions.

Plasma
Plasma refers to matters existing in the form of ions and electrons. You can think of it as a partially ionized and conductive gas. When the gas receives excessive energy, its electrons will break away from the nucleus, forming plasma.

Plasma is usually hot. However, through high-voltage gas discharge, cold plasma can be generated under atmospheric pressure. It contains highly active particles, such as electrons, anions, cations, and free radicals. These particles can then react with the nitrogen, oxygen, and water vapor in the air to produce other active groups that can destroy tumor cells.

Different active particles have different effects on cells. We can control plasma with a precise process to relieve various health conditions. In addition, plasma avoids the side effects of drugs and makes it easier to endure the painful reactions of pathogens. Plasma will never cause any damage to healthy tissue.

For more details, please check this link: 
https://www.spooky2-mall.com/blog/which-treatment-mode-is-the-best-for-you/

Source: https://www.facebook.com/groups/spooky2/posts/2759169434244942/

Q9: Can you explain when to use angle, current or angle and current?

A: Please check the link to know more about the difference between selecting Angle + Current and performing the Current and Angle:
https://www.spooky2support.com/hc/en-us/articles/360002149534-Would-you-explain-the-difference-between-selecting-Angle-Current-and-performing-the-Current-and-Angle

Q10: What is the ETDF and how do you use it?

A: The original ETDFL list is in KiloHerz, so all the numbers must be multiplied by 1000 before using them in Spooky2.

It is very important to know the units in which a list is provided.

For more details, please check the link:
https://www.spooky2.com/forums/viewtopic.php?f=12&t=9219

Q11: What are all the acronyms on the right side on the programs tab? alt bfb bio cafl cust dna ETDFL etc…

A: The most important part of any Rife frequency therapy is using the right frequency in a form that is clean enough and accurate enough to be effective. In this article, the various sources for frequencies are discussed.

For more details, please check the link:
http://www.spooky2-mall.com/blog/rife-frequency-sources/

Q12: Does the laptop need Internet connection to run spooky2?

A: Turning off Wi-Fi is fine, and even encouraged. Spooky does NOT require Internet at all after the software is downloaded to operate fully. Many users even download the software updates on a different computer and use a USB stick to transfer the file to the Spooky computer, and any screenshots from the Spooky computer to the “net” computer for posting.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/908640672631170/