Q1: Can one use a scalar for removing heavy metals?

A: Scalar energy can charge your body systems and bring them back to normal situation so that they could function optimally. Once your body’s energy is restored, it can then heal naturally from heavy metal poisoning.

For more, please check the link:
https://spooky2scalar.zendesk.com/hc/en-us/articles/9774353801499-Any-experience-of-using-Spooky2-Scalar-for-metal-poisoned

Q2: If I sleep in a scalar field, does the orientation of my body to the field matter?

A: If you are targeting the head, suggest lying in the scalar field but the head is towards the Receiver box. You can be close to the receiver, but best not too close from the transmitter, 1 foot is OK. Make sure you are not holding the machine when you do the measuring.

For more details, please check the link:
https://www.facebook.com/groups/spooky2scalar/permalink/377650462808518/

Q3: Is doing a BFB with a scalar or just with the generator in contact mode better?

A: Spooky2 Biofeedback Scan is a powerful tool for listening to your body and discovering what frequencies are best suited for you. Different scans suit people with different needs.

For the Pulse scan

It uses the heart rate to monitor the body’s response to that frequency.

Under ideal conditions, the only variable of change should be the frequency, but this is not the case. Most individual’s heart rate changes with normal body movements. Thus, when you do a pulse scan, you should try to keep your body still so that you can get more accurate results.

Pulse can be used to discover frequencies which can calm the body (healing) and get rid of pathogens (killing). Since the body is the detector as observed by changes in the heart rate, one can use this form of biofeedback to interrogate how the body responds to any frequency. We base our assessment under the model that any frequency that caused the body some form of stress resulted in an increase in heart rate; and its corollary, that any frequency that caused the body to calm, a decrease in heart rate.

For the Gex Tens Scan

The GX provides the current/phase angle method of detecting resonance. This method is not monitoring the body’s response, instead looking for frequency resonance directly from the area subjected to the current.

During a biofeedback scan, GeneratorX records how the electrical signal behaves. A brief change in the electrical pattern shows that a hit was detected.

There are two different ways that GeneratorX measures the change.

1.Current flow. This is like water running in a river. Normally this is constant. But if the level of the water rises, the flow increases. GeneratorX measures this flow rate.

2.Phase angle. If you are walking with your child, normally they are at your side. But if you start walking over rough terrain, the child will fall behind. Phase angle is like the distance between yourself and your child. The terrain is everything between the TENS pads. GeneratorX measures when the terrain is rough or smooth.

Some biofeedback systems can measure one or the other, but not many do both. And none can reach the dizzying speeds of GeneratorX.

Spooky2 Scalar Biofeedback scan

It is special. The Spooky2 Scalar Digitizer measures tiny changes to the scalar field around you during scalar frequency scans. Frequencies that invoke changes to the scalar field will be recorded. These changes indicate subtle scalar reactions within your body. When you are doing a Scalar Biofeedback scan, only one GX is required since it has two generators in one. Generator 2 modulates the scalar field, and Generator 1 measures the response.

It is best to lie perfectly still when doing a Scalar Biofeedback scan and make sure that you only have one person in the scalar field. To ensure the accuracy of your scan result, please also keep your pets away during the scan.

For more, please check the link:
https://www.spooky2-mall.com/blog/four-ways-of-running-biofeedback-scans/

Q4: Can scalar cure tinnitus?

A: Yes, let us hear what our user said about it.
1. You run detox first. Then whatever you wish. What equipment do you have? BFB the run kill on the BFB while running detox 24/7

2.I have a kind of tumor in my ear and I lost hearing from the left ear. I’ve been using spooky for just a week and I’m surprisingly recovering my hearing. I’m very happy. I will remain persistent.

3.I have this terrible problem when I had Lyme disease, when I cured this disease on spooky2 plasma problem with ears ended completely.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1488938357934729/
https://www.facebook.com/groups/spooky2/permalink/1334049293423637/

Q5: How do you use the scalar bfb scan to run hunt and kill in contact mode?

A: You don’t need to load it into a shell as a preset. Almost everything already set up for you. You just select Biofeedback > Generator X > hunt and kill (C). Then go straight to the control tab and click overwrite generator and then select your generator. Make sure that the tens cable is connected directly to the output 1 on the Generator x without a boost. Attach the tens pads to the left and right side of the abdomen anywhere between the hips and the bottom of the ribs. I tend to make mine more firmly attacked with microporous tape ( the type that nurse uses to attack the cotton swab after the blood tests) that I buy from the pharmacy and wrap some tape around where the needle from the tens cable connects to the female socket on the tens pads to make sure it stays in. Then in the scan box, I select “angle and current” as that gives me more frequencies and is more reliable (others may have other opinions on this) and then I select “peak”. The next thing to do is to in the scan box, click scan (not the run or start button, the scan button!) and curl up in bed for a nice sleep until the morning. The scan button is the one that starts the hunt and kills. Then do this every night for a while and see if things get better. I have heard that someone got over itchiness under the skin for about 7 -8 months of this and I hope to have similar effects. It has DEFINITELY (in accordance with my experience) killed a few things off and I am looking forward to more results as I progress through the year. Have fun killing!

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1320902474738319/

Q6: Can I use the results of a Scalar BFB scan in a Remote?

A: Yes, you can run these results anywhere. One thing though, the Scalar only scans up to 50 kHz. For this reason, you might be better off doing a TENS pad scan.

However, there are cases where a TENS pad scan can’t be done, say like you are trying to scan for a brain parasite or you are trying to scan a pet with fur. In these cases where TENS won’t work, then Scalar is an excellent option.

On the other hand, John has said in the past that Scalar scan had amazing reverse lookup hits that matched known issues.

For more details, please check the link:
https://www.spooky2.com/forums/viewtopic.php?f=117&t=14533&sid=f16596b03a77fad43c2bc7629d5182da

Q7: Should the terrain protocol be run first before attempting a scalar BFB?

A: Yes, at Spooky2 you can do terrain first.

Terrain protocol is a list of programs which we recommend running when you get your spooky2 machine first time. It’s a 11-day full body detox program which makes your body ready for treatment. It prepares the terrain in your body to be more available or receptive to further Rife treatments.

Biofeedback scan requires a frequency sweep to be input to the body, plus a system to monitor the results of this. As this sweep is being transmitted, it will kill or injure pathogens. Your body registers these events as stresses, and each one is clearly recorded. It helps find the frequencies the body needs. After scan you save the scan result directly and then run the scan result by spooky2 to give your body a best needed treatment.

You can find more details on understanding biofeedback scan:
https://www.spooky2-mall.com/…/understanding…/
https://www.spooky2-mall.com/blog/all-you-need-to-know-about-terrain-protocol/
https://www.facebook.com/groups/spooky2/posts/2395023133992

Q8: What about my cats and dogs while i am lying down, can they be around me when doing scan?

A: Better not, it is not recommended the share the field with pets if you are in the Scalar field. When the scalar field is shared, it can sometimes create symptomatic “cross-talk” between beings. This is why you shouldn’t share the field with someone who is very ill, as you may inadvertently share some of the “information” of their illness. In this regard, pets are kinda an unknown quantity.

Q9: How can I do a short or a long BFB scan?

A: By default, BFB scan will save 10 frequencies most suitable for you. And One frequency runs for three minutes, so running a biofeedback scan result would take 30 minutes. You can set an alarm on your phone so that it alerts you when the run is over. For doing BFB scan with scalar, it takes about 30 minutes, and it will beep at the end. 
You can set the “Min Read Time” under the Control tab to a smaller number than the default(.07). Then the duration will decrease. Just like the picture shows: