For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/822516967910208/

Q2: For Biofeedback scan, there are several options. Would you recommend Grade Scan, Refined Scan, or General scan? Do you have a system when doing BFB?

A: 1. Grade Scan: it does a quick biofeedback using the frequencies of the programs you load and reorders them from strongest to weakest “hits” in how they affect your body. But it doesn’t tell you they’re true hits. If you do grade scan with an ovarian cancer program and you’re a man who obviously doesn’t have ovarian cancer, it’s still going to return those frequencies in some order. Garbage in, garbage out. It could potentially be useful if there were 10 programs for your condition in the database and you load all 10 into the shell and want to know the top 20 out of 300 that your body has a reaction to the strongest, because you want to work smarter not harder if that makes sense.

Refine scan: double-check the manual on this one, but if my memory serves me correctly this one will take each frequency and go +/- a little for each one to determine what your body reacts to the highest.

So if your program started out as 100, 200, 300, 400… afterward you would end up with results like 100.039, 199.991, 301.233, 402.87.

Again, not proof that these will do anything for you — it’s all relative.

2.To me – grade analyzes multiple programs. Returns top 10 or 20 frequencies.

Refine – scans xxx and refines so the end result is more specific and refined.

Closer to MOR, more likely the pathogen will devitalize.

For more detailed information, please check this link:
https://www.facebook.com/groups/spooky2/permalink/1849259848569243/

Biofeedback scan requires a frequency sweep to be input to the body, plus a system to monitor the results of this. As this sweep is being transmitted, it will kill or injure pathogens. Your body registers these events as stresses, and each one is clearly recorded. It aims to find the most suitable frequencies for your body, giving your body the best-needed treatment.

This blog clearly explains what Spooky2 biofeedback scan is:
http://www.spooky2-mall.com/blog/understanding-biofeedback-scan/
https://www.spooky2-mall.com/blog/cat/biofeedback-scan/

Q3: Can I put two different people (nails) in Remote under same program?

A: Yes, you can.

1. You need to ensure each piece of nail is isolated within tape or label so that the DNA doesn’t touch. Also, this enables you to easily remove someone’s nail should they experience a Herx. Make sure you label each so you know which sample belongs to which person. As long as they fit, it will work. Some have stated that they have put in 50 at once.

2. If you’re using one of the newer “clamshell” remotes, make sure it closes completely. Thus, if putting in multiple nail samples, they would need to be tiny. Just a sliver is enough.

If you are running the same program, you can wrap the DNA samples of each person separately with stickers and put them together under Remote, and run them. But need to run is a different program, then each person needs to have their own generator and accessories.

For more details, please click this link: 
https://www.facebook.com/groups/spooky2/posts/2037173473111212/ 

Q4: Why did Spooky2 recognize only one generator when I restarted two generators? All Spooky2 Remotes have indicator lights on for both generators.

A: Exit Spooky program, switch off both generators and disconnect USB cables.

Open Device Manager and keep on screen. Connect one USB and switch on the XM, wait for device manager to confirm the Port, then connect and switch on the other.

You should now have both working, you might have different channel numbers/Com port numbers if the ports were not closed due to an unregulated close down.

For more details, please check the link:
http://www.spooky2.com/forums/viewtopic.php?f=74&t=5407

Q5: Do you ever had clients send blood and saliva for BFB? If so how long will it last for testing?

A: Yes, you can use the sample digitizer scan.

Since there are some inconveniences when running Pulse Scan and GenX TENS scan, we have introduced Sample Scan to avoid any physical limitation. You only need one Sample Digitizer to run Sample BFB Scans.

The working principle of Spooky2 Sample Digitizer is similar to Remote mode and is compatible with direct GenX scanning of biological samples (urine, saliva, blood, etc.). Due to the high ratio of pathogens within the biological sample, Spooky2 Sample Digitizer is better suited than TENS scans for finding pathogens in your body.

However, the effectiveness of using Sample Digitizer to run BFB results is not ideal. For this reason, we recommend using proper Spooky2 Remote, plasma, or contact modes to run your scan results.

How to Run Sample Digitizer Scan and Run Preset Using Remote:
https://www.youtube.com/watch?v=9o6GN3ERLtk

Related blog:
https://www.spooky2-mall.com/blog/spooky2-sample-digitizer-guidelines/

Q6：Should you use the Booster when doing a scan? or is it better to do a BFB without the booster?

A: The boost can be a source of noise during BFB scans. For the most accurate scans, it is best to be without Boost.

For more information, please check this link:
https://www.facebook.com/groups/spooky2/permalink/1961023670726193/

Q7: Remote works better for healing than killing?

A: Yes. Generally speaking, when deciding which types of frequency to run in the Spooky2 generator, you must understand what caused or triggered your health problem beforehand. First, look at the name of the program/preset and the description attached to it. If the program/preset has the word “disease” attached to it, it’s highly likely to be caused by a pathogen. With a pathogen-related program/preset, it is usually a good idea to run the frequencies in Killing Mode. Bacterial, viral, or other biological factors may also indicate the frequencies are more effective in Killing Mode.

Healing Mode would apply to almost everything else that is not targeting a pathogen in the Spooky2 database. For instance, detox is more of a body-cleaning process without eliminating pathogens or bacteria. When you run a detox program, the frequencies are removing toxins and assisting the natural detox system in your body. You are not eliminating a pathogen in the process. Therefore, a Healing Mode is more suitable in this case. Energy-balancing programs, such as Chakra and physical toning (i.e. Songs of the Spine), should also run in Healing Mode.

Programs related to autoimmune and inflammatory diseases are special cases because they usually require both the Killing and Healing Mode. If you’re not sure, you can use Universal Square H-Bomb which is suited for killing or Healing – If in doubt you can use this preset with confidence. It is not stronger, it is just universal shell preset.

Source: https://www.facebook.com/groups/spooky2/posts/2744032399091979/

Q8: How do we know where to place the tens pads?

A: Please check the Tens pads placement from the link:
http://www.spooky2-mall.com/blog/where-to-place-tens-pads/

Q9: How to add presets to preset chain?

A: 1. Put your scan results in an empty shell.
2. Save it as a preset.
3. Go to the presets, add your preset to the chain, and the other presets you’d like to add. Add it in the order you’d like.
4. Take care, that the presets you add should have a limited duration. Either by not repeating forever or by adding a duration in the settings.
5. Then save the preset chain as a new preset.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1204320249729876/

Q10: With the detoxification program, can I run another program simultaneously?

A: Let’s see what our users said about it:

I’ve run the Terrain protocol continuously for over 3 months, with no detriment. If you are in good health, it shouldn’t hurt to run it for a year, but I don’ think it is necessary. I think its probably better to run it periodically (say once a month) rather than continuously, as your body can become accustomed to it.

When you first start using Spooky2, we usually recommend doing a Terrain Protocol first. The Terrain Protocol is a carefully stepped detoxification process. The Terrain Protocol will remove heavy metals, chemicals, systemic toxins, bacteria, and parasites from the user and improve their liver, kidney, and lymphatic functions. After the protocol, your body will be rid of toxins and start to recover on its own. Also, Rife frequencies will be more effective because toxins could block and absorb rife frequencies, leaving less energy for your cells. That is why we suggest the Terrain Protocol before Rife treatment. You can find more information about Terran Protocol from here: 
https://www.spooky2-mall.com/blog/all-you-need-to-know-about-terrain-protocol/

For more details, please check this link:
https://www.facebook.com/groups/spooky2/permalink/1131337823694786/

Q11: Can you explain how to run the hunt and kill program?

A: Hunt and Kill preset commences with a brief biofeedback scan, followed by running the identified hits on an allocated generator. In subsequent cycles, the previous hits undergo re-analysis, ensuring that mutated pathogens are targeted. Regardless of how elusive the pathogens may be, they are detected and marked as targets. This preset continuously refines the initial scan results and automatically runs until manually halted or no hits are found.

For more details, please check the link:
https://www.spooky2-mall.com/blog/the-difference-between-scan-and-run-hunt-and-kill-preset/