Q1: I have the complete spooky rife equipment the bulb tub etc. do i need the scalar now?

A: Spooky2 Scalar is a Tesla device that transmits natural scalar energy rather than electromagnetic waves. A scalar field is created between the two boxes (Transmitter and Receiver) to restore your health. We believe that one of the root causes of disease is a blockage in our energetic pathways or chakras. When there is a blockage, the local metabolism slows down, and the body structure becomes less energetic. It is less capable of removing chemical waste, causing further build-up of toxins in the same area. This vicious cycle will repeat. Scalar fields are the natural fields that cells use to communicate. It helps introduce energy, which restores this communication, exposing the diseased cells to the body’s defenses.

Spooky2 Plasma delivers frequencies to your body via powerful electromagnetic waves. That’s why it is best used for killing. It’s the only machine we know of that can transmit frequencies of up to 3,500,000Hz (3.5MHz) without needing any wasteful and potentially harmful fixed carrier frequency. Most parasites, viruses, candidas, molds, etc. can be killed right away if the right frequencies are applied. When Spooky2 Plasma is applied at a distance, it can also be good for healing.

In summary, both Spooky2 Scalar and Spooky2 Plasma are very powerful in helping restore health.

If you want to boost your immune system so your body is better able to fight or rebuild itself, we would recommend you to choose Spooky2 Scalar. For people who like to use essential oil and herbs, Spooky2 Scalar is also a good choice since you could get the healing energy from those substances.

If you are dealing with pathogen related health problems which require a lot of powerful killing, we would recommend you to choose Spooky2 Plasma. It can also help you get rid of the annoying molds in your house.

You can read our users’ reviews here: https://www.spooky2reviews.com/

Q2: A threshold of 0 seems aggressive for a scan. Is there a better threshold to use?

A: It varies, but given the version you cited.

If you measurement for current is say 650, then 651, then 649, then 700 mA across 4 frequencies, the running average up to the 700 would be 650 mA. 700 would be a change of 50 mA.

700 / 650 * 100 = 107.69, which I believe is reported as a hit of 7.69 which is way over any threshold one may specify (big hit). Increase of 7.69%

A threshold value of .2 would eliminate all the data that falls below this, meaning it would have had to increase by .2 % (given the version you cited).

I’m not 100% sure this is it, would have to run some numbers to verify, but not in a position to do so as my gear is back at home and I’m in Alt. GA

If you were using peak, instead of running average, then the raw data is used.

650, 650.18, 650.5 for 3 measurements. 2nd frequency would not make the cut having a change of only .18 (below .2), but the 3rd frequency would having a change of .32.

For more details, please check the link:
https://www.spooky2.com/forums/viewtopic.php?f=5&t=9645

Q3: How long would you run the programs for? Is one day enough? A week?

A: There is no maximum run time for a program or preset. But here are some guidelines. If you run a program or preset and your symptoms go away, you can stop. If you run something for 3 days and you see not improvement OR you don’t experience any new detox symptoms, you ought to stop and find another program or preset to run.

The Terrain protocol is a single chained preset that takes 11 days to run. In the Morgellons & Lyme Support folder are some presets that take as long as 222 days to run.

On the other hand, if you are running something and the symptoms become too intense, as if you are having major detox or herxing, I would stop and let yourself recover, and run it again when you are able to. Alternatively, you can lower the amplitude on the treatment to lessen its effect. For chained presets, you need to lower the amplitude on each element of the chain (for this use ChainEditor).

For more details, please check the link:
https://www.spooky2.com/forums/viewtopic.php?f=9&t=9899

Q4: It is a little confusing with the biofeedback scan results and the reverse lookup results?

A: The scan results are frequencies that the body responded to. The body knows and only the body knows why. You can not ever put a label on them with any accuracy.

Use of the scan results in a treatment regimen should improve one’s standing as the body has already indicated that there was a reaction.

Even if there are say 3 false hits in a set of 20, you will stand to gain from the 17 good hits, while the body will probably ignore the other 3 false hits as there would be no resonance.

The reverse lookup is a tool to ask the database what frequency sets contain a frequency that is close to the frequency that is in the scan result.

Because this reverse lookup is just looking at what’s recorded in the database, based on loose matching simple math based association (what % of tolerance did you specify), it is unfair to think that the frequency returned by the scan could be properly labeled.

For more details, please check the link:
https://www.spooky2support.com/hc/en-us/articles/219876767-What-is-reverse-lookup

Q5: What’s the difference between the microgen and the remote?

A: The Microgen uses current to propagate frequency, the shortest distance between two electrodes is the range of frequency action.

Spooky2 remote uses the principles of quantum physics and the antenna properties of DNA to transmit through what physicists call non-local space. You don’t have to be in the same room as the machine, or even in the same country.

Q6: What would you start with, what devices would you have first?

A: They have different numbers of generator.

You can check below link to learn details of different kits:
http://www.spooky2-mall.com/which-kit-to-choose

Q7: Can we put all of the pills on the receiver coil and imprint them into a single glass of water?

A: Absolutely. Group them together and try to get them within the small circle indicator of the receiver coil. If they extend beyond this circle, don’t worry. This is simply the ideal position. One research group places over 30 different oils and drugs on the coil and report great results.

Q8: When you run the Scalar Biofeedback Scan, should the results be run more than one session?

A: After you complete a scan, you will get a list of frequencies that show up as your scan results. These can be saved in a custom program that you can run through the scalar unit. Select scalar shell preset, click on the program tab and select your custom program. Click on the control tab, check overwrite box, and click on your generator number to run the results on the scalar unit.

The time to run BFB results depends on your Spooky2 device, scanning every seven or four days is highly recommended.

Spooky2 Central/Plasma users should use the results program in a killing preset and run it once a day for four days, then scan again.

Contact Mode users should run it once daily for seven days, and then scan again.

Remote Mode should be run non-stop for a week and then scan again. Repeated scans are necessary. 

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1338080256353874/

Q9: Can you please explain the difference and benefits of doing BFB on the Digitizer – verses BFB with the tens pads in contact.

A: 1. The sample digitizer helps you use the Generator X Pro to gain a frequency set for the pathogens in a biological sample. That set you can then run as normal though contact, remote, plasma, central, scalar and the like to help reduce those pathogens. For instance if you get a snotty nose that’s all green and gooey, an you want to kill the bugs in your body that are of that type, you use the sample digitizer to get the frequency set for the rife treatment.

2. Sample Digitizer is a clamp like device which holds two slides and you put your DNA sample in between, attach it to GeneratorX and obtain biofeedback which you will use to kill pathogens etc.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1485942828234282/

GenX/GenX Pro Scans results record the changes of electrical signals. If there is a frequency resonating with a pathogen in your body, a subtle change in the electrical pattern will demonstrate a hit is detected and recorded in the scan result.

On average, the running time for a GenX/GenX Pro Scan is about 6 minutes, and the scan results are usually more accurate. GenX/GenX Pro Scan is more suitable for local scans compared with Pulse Scan.

For more details, please check the blog:
https://www.spooky2-mall.com/blog/four-ways-of-running-biofeedback-scans/

Q10: Can fibroids be treated w/Spooky? Experience of shrinking uterine fibroids with Spooky2.

A: Using contact electrodes on the acupuncture points SJ-5 (right arm) and GB-41 (left foot) they started to shrink almost instantly. The program “fibroids general” from CAFL, in the shell from DB “Heal and Entrain”. Can use the “healing” shell from JW instead if you don’t know DB. The duration is 54 min. Simple as that.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1678115209017042/

Q11: Is it OK to use Big Magic while running programs on Spooky2 or should I pause Spooky2?

A: Yes, you can use Big Magic while running Spooky2 programs.