For more details, please read this blog: 
https://www.spooky2-mall.com/blog/another-magical-use-of-holographic-stickers/

Q4: Can imprinted stickers be used by people who have not done Terrain?

A: At Spooky2, we always recommend our users to run the Terrain Protocol Preset for detoxification before starting their Rife frequency treatment.  Detoxification is important before you run any Rife treatment programs.

1. If you skip Terrain, your body may be too toxic for the frequencies to be absorbed well.

You may also get sicker, as any healing done will be accompanied by toxin dumping, but the detox pathways are not optimized – or stimulated at all, so may not work well. Additional toxins being released into the blood without the detox pathways being able to handle it can cause extreme illness.

2. Terrain slowly – just pause when you need to so the body can catch up. Once you feel better, run for a while until you start to feel like it’s enough, then pause again… In this way, it will get done as you can.

For more details, please check this link:
https://www.facebook.com/groups/spooky2/permalink/1810994902395738/

Q5: What the age limit for a child to do rife treatment?

A: From Nenah Sylver’s Rife Handbook p325:

“German naturopath Harald Sievert writes: “In my opinion, children are far more resilient than we adults believe. This is clearly demonstrated in our therapeutic measures where children eliminate better, react quicker and produce positive results more rapidly with holistic treatment.” 

This suggests that a child will be strong enough to handle the microbial die-off from a session.
Rifing infants should be done on a case-by-case basis, as infants are fragile. The brain and nervous system, digestive tract, reproductive organs, endocrine system, and immune function are immature and still developing.

Nonetheless, should your children ever be ill enough to warrant a doctor’s prescription for antibiotics, this may be the time to rife them instead. Unlike drugs, rifing does not contain chemicals that poison the body. Many parents have reported success with infants even as young as a few months old.

If my infant or small child had a dangerous disease for which a doctor wanted to administer toxic drugs, I would first try rifing without hesitation. However, it may be unwise to use the technology for routine and relatively mild childhood illnesses (such as the German measles) unless the child is excessively uncomfortable or ill. These illnesses stimulate the child’s system to produce antibodies (proteins that catalyze the body to defend itself against foreign microbes).”

For more details, please check the link:
https://www.spooky2.com/forums/viewtopic.php?f=10&t=9251

Q6: Can I place a large 3 gallon glass container of water between the suitcases?

A： A large water container may take longer to have the frequencies imprinted. Perhaps an hour may be required for this type of volume. After this time, the water will contain the frequency information of the scalar field.

Q7: How long does it take to print information into the water?

A: It only takes a few minutes to imprint information into a small container. A glass of water could take 10 minutes for more. A larger container would take even longer.

Q8: How long does an imprinted holographic sticker last? Any suggestions on how to keep the holographic stickers to stay on better?

A:  Imprinted holographic stickers can last for a very long time. They can last as long as they do not get wet, worn out, or exposed to the sun and strong magnetic fields.

Many like myself put them in a plastic coin holder and keep them in a pocket. They last longer. I use a plastic coin holder or a very, very small ziplock baggie.

You can find more related QA here: 
https://www.spooky2-mall.com/blog/holographic-stickers-faqs/

More details here: 
https://www.facebook.com/groups/spooky2/posts/2583561988472355/

Q9: When imprinting water with cold laser, you placed one node above water and one outside container?

A: Yes, you can. You can also use cold laser. Possibly the best way would be using Spooky2 Cold Laser Wrist, because of the fact that it’s so large.

You can have a small glass of water. You can put it on the top of the water, so they can get benefit of five cold lasers all working together with coherent light placing over the top. The cold laser is a very good way of applying frequencies into the water. It’s actually better than the coil, where it can take only something like 10 seconds for the fast frequencies / the high frequencies. If you want to put lower frequencies into water, you choose the treatment time over perhaps an hour to the very low frequencies.

For viewers who aren’t very familiar with imprinting frequencies into the water, the idea is you treat the water, and then you drink a small part of the water. And that’s the convenient way of applying the frequencies directly into your body internally. So yes, laser can be used for imprinting frequencies and they can be done so very efficiently.

Q10: Will the EMF be imprinted into the water?

A: The water does have the low frequency from the EMF but not much, as low frequencies take longer to imprint. The EMF is not absorbed and retained. Only the frequency of 50 or 60 Hz.

Q11: Is imprinted holographic sticker the same as using Spooky2 Remote? How to imprint frequencies on holographic stickers using Spooky2?

A: Let’s look at what our users said about it:

1. In my opinion, the remote is more holistic because the frequencies go to the whole body, while the sticker is more for the localized area of treatment.
2. Stickers deliver all imprinted frequencies at the same time. Remote delivers them in a sequence, one after the other. Consider the Terrain for instance: you would definitely not want all those frequencies delivered to you at the same time. The Remote Terrain is a perfect choice.

3. You can find more information about imprinted holographic sticker from this link: https://www.spooky2-mall.com/blog/another-magical-use-of-holographic-stickers/

For more details, please click this link:
https://www.facebook.com/groups/spooky2/posts/2391414934353729/

Q12: How to store imprinted water?

A: Storage in a blue cobalt container is best from research.

Keeping imprinted water away from new sources of imprinting will allow it to retain the information longer. Yelling at water will deconstruct the imprinting for instance, and saying words of gratitude over water will add to it.

Suggest that one consume imprinted water immediately for best results, and within a week or less if stored.

Q13: Can you imprint water in a plastic container?

A: To be safe, we recommend using glass containers without a plastic lid or paper label. You can place a marble on the top of the bottle instead of the plastic lid.

Q14: Is it better to imprint from the Central or the generator?

A: Generally speaking, it is better to imprint from the generator. Plasma is a broad-spectrum transmission device. You can put a nice clean frequency into a plasma tube, and what you get out is a Smorgasbord of harmonics from the tube. When you imprint frequencies into the water, generally, the idea is to put known frequencies into the water. If you are using your plasma, you are putting a whole lot of frequencies into the water. So it may or may not be what you want to do. So most people will use a coil or the Spooky2 Cold Laser to imprint frequencies.

However, Spooky2 Central is the most powerful tool you can use for very serious conditions, such as very serious cancers. If you are currently treating yourself with Spooky2 Central, it may be a wonderful idea to have a vial of water nearby, and treat that whilst treating yourself with the plasma tube, and then between sessions, you can drink that water.

Spooky2 is wonderful for experimentation, and we get a lot of feedback from people for ideas, so this may be an idea where you can treat yourself with plasma during one session and then you can also treat yourself between sessions with water that has been imprinted with exactly the same frequencies that you have applied.

Q15: What is the maximum number of frequencies that can be imprinted onto a holographic sticker?

A: I’ll give you my perspective, and maybe it will help you arrive at your own conclusion.

A single well-defined frequency can have a beautiful structure — see cymatics.

A few well-defined frequencies can be also beautiful and structured — like a musical chord.

We tend to be able to hear when multiple frequencies do not sound good together, and their structure usually is not well defined either.

When you get too many frequencies co-existing together, it will approach noise – like white or pink noise.

Sooner or later, you lose the advantage of having a well defined structure from imprinting.

For more, please check the link:
https://www.spooky2support.com/hc/en-us/articles/6393283172251-What-is-the-maximum-number-of-frequencies-that-can-be-imprinted-onto-a-holographic-sticker