Q&A of Selina Frank Spooky2 FAQs Training Courses

Q1: What would affect the color of colloidal silver?

A: When it comes to colloidal solutions, the main parameters contributing to color change(plasmon) likely come down to particle type, size and density. Of which I’d add, the type parameter depends on whether one chooses to qualify ions as particles or not.

That said, out of all of the references, I’d consider the first paragraph to be the most complete under general guidelines. Whereas the other statements appear to support this by way of deductive chemistry. However, I’d also add that it may not always be feasible to apply observations from one generator to another given the inherent difference in process methods that exist between them. Which will undoubtedly affect the ionic to particulate balance for example. – NB. ions possess no tyndall or light scattering properties, in contrast to silver compounds etc.

Hope this helps.

PS. every parameter(voltage, temp, water, etc) will have an impacts on solution composition. ionic/particulate ratio, compound types, size, saturation limit and-so on and so-forth.

For more details, please check the link:
http://www.spooky2.com/forums/viewtopic.php?f=6&t=4785 

Q2: What is the Alternative to magnetic stirrer for making Colloidal Silver?

A: Using a small aquarium air pump attached to a bubbler stone. The same item “Fusion Air Pump 200 Aquarium Air Pump” is also available from Amazon.

A small motor to rotate the water container around the rods, works wonderfully, and scrubs the rods with water continuously.

For more details, please check:
http://www.spooky2.com/forums/viewtopic.php?f=28&t=4674

Q3: Which frequencies do you recommend to run to generate colloidal silver?

A: The Colloidal Silver Preset sets the parameters to the ideal. If the frequency is too high the silver particles do not slough off the electrodes properly. The 5 Hz for this Preset is multiplied by the number of wave cycles in the special waveform.

Q4: When making colloidal silver, is it normal that the silver rods are going grey / black?

A: That is part of the electrolysis action. We use the magnetic stirrer to keep the water churned so this does not happen. Or you can use a plastic spoon and stir the water every couple of hours.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/744568892371683/

Q5: What container should we use to store colloidal silver?

A: Use Dark glass because light will deteriorate it pretty quickly.
No metal and not mixing it with salt.
I use a glass bottle wrapped in tinfoil to keep out light, works fine.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/766319810196591/
https://www.facebook.com/groups/spooky2/permalink/1568706126624618/

Q6: How long will the colloidal silver be fresh after production?

A: Shelf life of about a year or more. Glass, preferably dark container would be recommended.

Q7: Is there a toxicity limit of colloidal silver?

A: Let’s look at what our users said about this:

  1. Mine runs 7-10 ppm. I take 2 oz morning and night. I’ll double up if I feel like I’m coming down with something and nebulize it if it going to the lungs for at least a week. That’s the plan. Mine is also nanoparticals. Very teensy.
  1. I use the nasal spay when I feel i’m exposed to something. I also gargle with it. I’m afraid to drink it, though.
  1. I had taken over 250ml daily for over a year and had no adverse side effects that I could see.
  1. I’ve been drinking it daily, a shot glass, more if I feel a bit unwell, for 12 years. I make my own, around 10-12ppm.

Silver is an essential mineral for our body. We get most from our food but because crops are grown in petrochemical drenched soils for over 50 years we are all mineral deficient. We normally take in 78 to 80 micrograms a day, half of that from our food. Our bodies have mechanisms to flush out excess silver. HOWEVER if you overload your body for years with high doses, like 20 FL oz or more A DAY FOR YEARS, your skin could turn a bluish/grey. This is because the body has pushed the excess silver to the sub levels of the skin. When this skin is exposed to sunlight the silver in it tarnishes and becomes a blue/grey colour.
It is not dangerous just ugly.
The safe and responsible use of Colloidal Silver is the best home pharmacy.

5.I drink 125ml every day for months now, no problem…. there were times i drunk 250ml every day….. I have a CS machine that makes 1 litter 20PPM in 3 hours so I have no problems making as much as I want and take as much as I want…. I also use sometimes a reducing liquid that turns the Ionic silver into Particles usually i turn the 20 PPM into 10 PPM Ionic and the rest is turned into Particles… I also use ultrasonic inhaler to breath 5ml CS directly in to the lungs and from there directly into the blood… I use this device – https://silverlungs.com/

  1. Put 1-2 tsp colloidal silver in a nebulizer and inhale to infected lungs.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1541719295989968/

Q8: How do you know if your colloidal silver (made with spooky 2) is successful?

A: The only test I know of for CS (without sending it to a qualified lab for big bucks) is to shine a laser pointer through it and see the line pass through the liquid… The stronger the line, the stronger the silver content. Obviously, this test is not a quantifiable measurement of the content, just a visual representation of the particles within.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/683550638473509/

Q9: Is it safe to use colloidal silver in the eyes, and as a nose spray?

A: 1. Colloidal silver is safe for any part of the body and works well on the more delicate parts. Use for adult, child or pet. Great choice!

Let’s look at what our users said:

  1. Yes I have had a very suidden and very intense eye infection, that then blossomed into a cycle of eczema around the eyes. Viracillin, Spooky2 and colloidal Silver.
  2. I use colloidal silver as a nasal spray daily and every evening and some times in the middle of the night during cold and flu season and it seems to work phenomenal clearing out and keeping the sinuses clean and clear.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/769993463162559/

Q10: How can people test the PPM of the colloidal silver solutions made?

A: 1. PPM is measured by a TDS meter. In measuring CS, its only good to get an initial reading because one is supposed to start with zero. Once CS is made, we go by color to determine the strength or with sp2 – go by amount of time processed. the water will have a metal taste.

2.10 ppm, you can have as much as you like if you are sick. I have 20ml of 10ppm every day. It’s great for ear infections and throat infections. Ppm meters are not that accurate but close to. You can buy them online. If you make your colloidal silver you can shine a pen laser through it and you can actually see the silver in the water. Don’t use tap water. The best water to use is distilled water.

For more details, please check this link:
https://www.facebook.com/groups/spooky2/permalink/1816556251839603/

Q11: Why can’t I see the laser beam in the colloidal silver?

A: The calculator assumes a specific current flow through the water. If the actual current is more or less, the time will vary.

Different distilled water allows more or less current, so the only way to calculate better is to measure the current and correct the calculation.

The other method is to run the program longer until the laser shows a line.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1473491539479411/

Q12: Is it correct if the boost has flashing red lights when making colloidal silver?

A: For making colloidal silver, it is correct that boost has little flashing red lights.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/1364708413691058/

Q13: What is the healing benefit of colloidal silver? What kind of pathogens does it kill? Can you drink it do treat diseases in your body, and if so, how much can one drink of it before it is too much?

A: Let’s look at what our users said:

  1. I am going to make some myself tonight as ran out. Colloidal silver kills most pathogens, virus, bacteria in body. Has helped release lyme disease in my brain and body, very powerful. I think colloidal silver is very safe, I could probably drink a quart of it, and be okay, though I might have a massive herx, and drink activated charcoal to stop it. I usually have colloidal silver in a spray bottle, and do a few sprays in my mouth in am and pm and also brush my teeth with it, also very good on skin diseases like eczema, acne, sores, etc… Video tutorials on colloidal silver:
    http://www.spooky2videos.com/?s=colloidal+silver
  1. Found some guidelines on Google. The more I read about it, the more I wannabrew my own perfect detoxer and antibiotics replacer:
    http://l.facebook.com/l.php?u=http%3A%2F%2Fthesilveredge.com%2Fhow-much-colloidal-silver-can-you-take-safely-each-day.shtml&h=pAQEIdPC3

Q14: When making the colloidal silver, does the run time automatically stop, or do I have to keep up the time/days to run it?

A: It stops automatically at the end of the time interval set by the dwell setting.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/768010776694161/