Q3: How can I resume my Terrain Protocol if my laptop accidentally shuts down?

Answer: It is always important to note which day you are on when running the Terrain Protocol so that you can start from the step you were at before. Here is a blog that demonstrates how you can resume your Terrain Protocol:
https://www.spooky2-mall.com/blog/how-to-resume-terrain-protocol/  

Q4: Should Terrain Protocol be run with other programs or alone?

Answer: Most folks run it several times a year or more and advise to only run Terrain alone. That way, no other frequencies will impact the work Terrain is doing. Once that’s done (after 11 days), you are free to then run multiple programs.

After the first time, you can do what you want. The recommendation to run it alone the first time is to make sure you don’t Herx excessively and overload the detox pathways. Once you’ve run Terrain more than once, you should know how much reaction you have, so know whether it’s okay to run more than it.

Q: How to load programs into Spooky2 GeneratorX Pro and how delete programs from Spooky2 GeneratorX Pro?

Answer: GeneratorX Pro can be run in standalone mode, which means you can run desired programs without connecting to a computer. We have a blog with instructions: https://www.spooky2-mall.com/blog/how-to-load-programs-into-generatorx/.

You can check the instructions for how to delete programs from Spooky2 GeneratorX via this video: https://www.youtube.com/watch?v=aSoUAM5PBNk.

Q: What is the Herxheimer reaction?

Answer: A Rife machine will have no side effects, but may create a healing crisis, otherwise known as a Herxheimer reaction, a detoxification response. Excessively large amounts of microbial or cancer cell waste and toxins hinder the body’s ability to adequately eliminate it through the usual channels (breakdown by the liver, through the colon or urinary tract).

So instead, the toxic material is discharged through the lungs, sinuses, and skin. Symptoms can include a flu-like condition, heavy perspiration and night sweats, fever, with or without chills, headaches, malaise, diarrhea, nausea and vomiting, pain in joints and bones, and itching, flushing, and reddening of the skin.

The above can apply to even a detox protocol where toxins are not being produced by die-off but are being released back into the bloodstream from where they were hiding (joints, muscle tissue, etc.).

If this happens your likely target is eliciting a response. This could be an indication that there is a lot of work to be done by these frequencies and may have been done too much too fast.

Suggest you take a break until your body is able to flush out what toxins it is processing.

Q: Can I run the terrain protocol for more than one person simultaneously using the remote? And how often should the terrain protocol be run?

Answer: If all of the people have no serious health concerns, their DNA can all go into one remote, and the program run on that generator. Ensure each DNA sample is in its own paper sticker and the Spooky2 remote can be closed. Sometimes Spooky2 Remote can keep 50 fingernails DNA samples. Some people run the protocol 2 to 3 times per year. It would depend on each person’s health condition.

Q: What is the Difference between Healing and Killing frequency?

Answer: A frequency will resonate and do its job where needed, regardless of whether you think it’s healing or killing. When deciding which types of frequency to run in the Spooky2 generator, you must understand what caused or triggered your health problem beforehand.

You can learn the details from this blog: https://www.spooky2-mall.com/blog/how-to-distinguish-healing-and-killing-frequency/. 

Q: How to run a biofeedback scan?

Answer: Spooky2 Biofeedback Scan is a powerful tool for listening to your body and discovering what frequencies are best suited for you. To suit people with different needs, there are currently four ways to run biofeedback scans. You can learn more details via this blog: https://www.spooky2-mall.com/blog/four-ways-of-running-biofeedback-scans/. 

Q: How to Do GeneratorX (GX) Grade Scan?

Answer: A grade scan can rapidly evaluate pathogen program frequencies for effectiveness against your condition, allowing you to identify those that will be the most beneficial for you. It is best to run Killing Presets. But healing preset will not change the frequencies so can also. You can learn the instructions from this video: https://www.youtube.com/watch?v=tU1atDinHWs.

Q: What is the difference between a program, a preset, and an empty preset chain?

• Presets = settings + programs
• Programs = only frequencies, no setting.
• Empty shell setting presets = Only settings.

First, choose an empty shell setting for the device you will use, then add programs.

If you do not choose settings, it will attach what was last loaded or the last program you had pulled up in the control tab.

If it’s remote-heal type settings and you are now doing contact, you will not have enough amplitude to penetrate the skin layer.

If you always use the same setting, it is fine. But it’s better to practice to start in the Preset tab/Empty shell of your choice then go to programs.

For other named presets, you can click them and they included programs, so you can go to the control tab and click “start” to run the programs directly.

Q: How do you choose between different programs for the same problem?

Answer: 1. I look at the frequencies listed for each, choose different ones, and add them to the chain. Many are the same.

2. You can choose them all, remove duplicates, and as long as less than 4 hours of estimated total run time, you are good to run in a loop.

3. I do a grade scan from the presets. Select grade scan, go to programs, select all that might apply, attach tens pads to the body, save top 10 results and run it back like a BFB scan. It helps to narrow large groups down.

For more details, please check the link: https://www.facebook.com/groups/spooky2/posts/2227930414035516/.