Q1: May I use both of the tubes in the face or head area ? e.g. for tooth or root Chanel treatment?

A: I think it is OK. You can lay your plasma tube over the vicinity of the head. Some have even used the plasma over their closed eyes to target the eyes better — the eyes being hard to target via contact methods as it is well insulated against electrical currents.

For more details, please check:
https://www.facebook.com/groups/spooky2/permalink/554763901352184/

Q2: If I do a BFB with the scalar, can the scalar BFB be use with the Central?

A: Yes, you can run these results anywhere. One thing though, the Scalar only scans up to 50 kHz. For this reason, you might be better off doing a TENS pad scan.However, there are cases where a TENS pad scan can’t be done, say like you are trying to scan for a brain parasite or you are trying to scan a pet with fur. In these cases where TENS won’t work, then Scalar is an excellent option.On the other hand, John has said in the past that Scalar scan had amazing reverse lookup hits that matched known issues.

For more details, please check the link:
https://www.spooky2.com/forums/viewtopic.php?f=117&t=14533&sid=f16596b03a77fad43c2bc7629d5182da

Q3: Does Spooky2 have frequency programs suitable for treating MS (Multiple Sclorosis)?

A: Let’s see what our users said about it:MS as well as Firbromyalgia is often caused by Lyme and co-infections. I would suggest your friend be tested for Lyme using the IgeneX Western Blot test. (NOT THE ELISA – which is useless). If it is Lyme, then the friend can combine and target treatments more precisely. Lyme is typically not a stand alone disease, which is why combo treatments are often more effective than Rife alone.

For more details, please check:
https://www.facebook.com/groups/spooky2/permalink/520343484794226/

Q4: Is the PEMF coil for central a different unit from the one for the Gen X pro and if so is there a way to identify it?

A: There’s only one Spooky2 PEMF coil. The PEMF coil used with spooky2 generator to run Spooky2 PEMF mode and the PEMF coil connected to central unit are the same PEMF coil. PEMF coil can be connected to the high-power port of a boost to run PEMF mode with a generator directly. But an adapter is needed to connect PEMF coil to central unit.

The PEMF coil for spooky central is for cellular electroporation. This makes the cells more susceptible to the plasma treatment. It’s a fixed 100 Hz signal. The PEMF for the generator, does a broad spectrum of treatments.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/posts/2281154452046445/

Q5: Is the plasma ball more for specific area and the tube is more for all over general?

A: The phanotron tube is for concentrated energy on a given issue, like a localized cancer, while the long tube is for scattered issues in the whole body, like disseminated pathogens.

Q6: Can you set up Spooky2 Central on its side?

A:If you have limited space, you can put Spooky2 Central on its side. The important thing is to make sure the ventilation holes aren’t covered. Make sure it has good ventilation. Of course, if there are conditions, we still recommend horizontal placement.

For more details, please check the link:
https://www.spooky2.com/forums/viewtopic.php?f=83&p=157885#p157885

Q7: Will all Central modes deliver the same frequency if used together?

A: The “Contact mode” and “PEMF mode” in the Spooky2 Central run on fixed freq & amp, and do not run the frequencies you put in the generator. The Contact, PEMF, and Ultrasonic functions in the Central mainly serve to advance the effects of the Plasma frequencies. You do not have to use all of them each session.

For more details, please check the link:
https://www.facebook.com/groups/spooky2/permalink/3582786508549893/

Q8: Is it OK to use one power socket for the central and the generator?

A: We’d like to recommend separating the outlets, use one from another room if possible. The plasma RF is pretty intense and will create interference with you generator if using the same outlet.

Source: https://www.facebook.com/groups/spooky2/posts/2718703281624891/

Q9: Can l put XM and/or laptop on top of the Spooky2 Central?

A: No, this will put the laptop and the generator too close to the Central. In fact, you want the laptop and generator as far as possible away from the Central and even further away from the plasma bulb/tube.

For more details, please click this link:
https://www.facebook.com/groups/spooky2/posts/2439175902910965/

Q10: What is the power consumption of Spooky2 Central?

A: The total power is about 120 watts give or take, depending on frequency.
To understand why 120W is better than higher wattage from other Rife machines, please check it here:
http://www.spooky2-mall.com/blog/which-rife-machine-to-choose/

Q11: If I connect the TENS cable and pads to the central I need to choose Plasma preset? Or do I need to choose Contact then as well?

A: When you connect TENS pads to Spooky2 Central, they are not used for Contact treatment in the traditional sense. The TENS pads on Central deliver a fixed 100 Hz signal, which helps open the cell walls during Plasma treatments to enhance effectiveness. You don’t need to select a separate Contact preset for this.

Simply apply the TENS pads while running a Plasma preset—this is the recommended way to boost the results.

If you want to use Contact mode as a primary treatment, then you’ll need to connect the TENS pads to an XM Generator or GeneratorX Pro, and choose a Contact preset.

Source: https://www.facebook.com/groups/spooky2/posts/3105860866242462/

Q12: Can I use plasma tube without Central?

A: No. Spooky2 Phanotron Plasma Tube is a perfect match for Spooky2 Central!

Q13: What are the advantages of Spooky2 Central?

A: Spooky2 Central is currently the most powerful Rife machine that can apply Royal Rife’s original frequencies directly without a carrier. It has gained favor among many users due to its exceptional effectiveness in targeting severe conditions. Spooky2 Central contains four modes: Plasma, Ultrasonic, PEMF, and Contact. Each mode of Spooky2 Central can be used individually or combined for enhanced effectiveness.

For the specific features of the four modes, you can read this blog: 
https://www.spooky2-mall.com/blog/what-are-the-advantages-of-spooky2-central/

You can learn Spooky2 Central success story here:
https://www.spooky2reviews.com/category/product/spooky-central/

Source: https://www.facebook.com/groups/spooky2/posts/2735064279988791/