Q1: Why it’s recommended to put water to imprint on the transmitter while substances to transmit molecular information should be placed on the receiver?

A: The energy flows from the transmitter to the receiver, then back. There is no scalar field until it hits the receiver and then it returns back to the transmitter. Therefore, in order to add a substance’s information to the field, the first entry point is the receiver coil (input coil). That information is then carried back to the transmitter. Once at the transmitter, the information can be imprinted to whatever is on the transmitter coil (output coil).

Q2: Does Spooky2 Scalar have any adverse effect on metal implants in the body?

A: No. Spooky2 Scalar will not interfere with any metal implants since scalar field passes straight through metal. But if you are pregnant or having pacemaker, it is not suggested to use Scalar.

Q3: What is the function of the push button on the receiver?

A: The push button on the receiver box lights when there is a scalar field generated, but it takes energy from that field, so it should not be left ON during use.

Q4: If you cannot measure the scalar feild, then how do you know your equipment is generating a field? If things break down, so how do you assure things a fubctioning?

A: When you perform scalar biofeedback scan or running Rife Scalar. The receiver light may be on, dim or even off. Because some power is lost in the digitizer and GeneratorX, the link cable becomes more sensitive to the effects of earthing. If the led if off, you can do a test to make confirm that a scalar field is present. Go to the system tab and select “Display GX current and angle”.

Then go to Control tab and check the scan graph. The graph is moving. Placing your hand in the scalar field should influence the graph. It means scalar filed is present.

In this video, we will show you how to know if the scalar field is present when the receiver light is off.
https://youtu.be/V4zdCl6VJF8

Q5: Can l be in the scalar field while imprinting frequencies into water?

A: Yes. The water frequency will then be tailor-made for you, since it will also contain the natural frequencies of your body. lt is definitely beneficial.

Q6: Can you explain why my display cabinet lights flash for many of the rife frequencies when I run with my Scalar? Can I stop it?

A: It depends on the frequency value. And you can’t stop the tuning led on the Transmitter box from flashing when connected to a Generator. That is normal for that program. Some programs do this. Can’t stop. You can put a little piece of cardboard on it at night.

For more details, please check the link:
https://www.facebook.com/groups/spooky2scalar/permalink/385574628682768/

Q7: Is it best to place one single tablet/pill on the spot instead of the whole bottle? Will the energy of the supplement eventually lose its potency?

A: You can of course put one single tablet/ pill, and it will not be a problem, you can still enjoy the benefits of it. Quantity is not a problem here.

Q8: For imprinting water, should I place the water first or the tuning first?

A: Yes, if you want to imprint the substance’s information into the water, you should place the water on the transmitter coil and the substance on the receiver coil first, and then turn on Spooky2 Scalar.  Then turn the tuning adjustment knob anticlockwise until the tuning light beside the transmitter coil is at maximum brightness.

For more details, please check the link:
https://www.facebook.com/groups/spooky2scalar/permalink/358564581383773/

Q9: When using medicines, do you have a time limit?

A: Normally it’s suggested to run Scalar at least 1hour during the day. If you put drugs on the receiver box, please pay attention and see if you have any discomfort. Drugs may have side effects and different people may have different reactions. For natural supplements, like essential oils and vitamins, there’s no limit to that. And you can use pure scalar for overnight treatment.

Q10: For use while sleeping, when the units are on other sides of the bed, how high off the floor should they be?  Can I put it on a dresser?  That would be a couple feet higher than the bed.

A: The two boxes can be put at different heights. And for best results, keep the two lids facing each other. To tune Scalar, you need to turn on and tune the transmitter. Turn the Tuning Adjustment knob anticlockwise until the Tuning Light beside the transmitter coil is at its first maximum brightness. You can also check if there’s transmission between the transmitter and the receiver by pressing the LED light on the receiver. If it’s on, it means yes. The receiver light is only for double-checking that the scalar field is formed. It doesn’t have real functionality. Please be kindly note that the LED light on the receiver should be turned off while using. You can find tutorial videos on how to set up and tune Scalar at this page:
https://www.spooky2scalar.com/spooky2-scalar-training-course/

For more details, visit:
https://www.facebook.com/groups/spooky2scalar/posts/1411714586068762/

Q11: Can I use 2 scalars at the same time?

A: You can use more than one set of Spooky2 Scalar, but it won’t add to the power. Even if the two units are tuned to the same frequency, they will not be synchronised.

For more details, please check the link:
https://www.facebook.com/groups/spooky2scalar/permalink/324269811479917/